peut any mode async explian one in Oracle dataguard

Similar Questions

• Spyware impossible question of connection in any mode system

  Hello

  I am facing spyware issue. Not able to login in any mode window. Got a window at the time of the connection and ask for unlock code. So, what's the unlock code? I don't have a CD bootable Windows XP CD or third party. What should I do?

  Hi Ganesh,

  Its an infection Ransomware. Unfortunately there are not any available for the same code. There are two types of ransomware, one of them asks you a deactivation of the 7 code block & another request you deactivation of the 5 code block.

  Including an infection you have?
  You can try the codes below:
  5 digits - 27496
  7 digits - 1351236

  If its not working, you need to connect your HARD drive as a secondary to the system one another & follow the procedure below:
  Go to rename it "C:\Documents and Settings\nom_utilisateur\Application Data" the suspect "svchosts.exe" & other svchosts.tmp & a file random alphanumeric.exe.

  Loading the hive for the infected HARD drive HKLM & change the following registry entry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  Change the value of the shell like: EXPLORER. EXE
  Change the Userinit value as: C:\WINDOWS\system32\userinit.exe,.

  Reconnect your HARD drive infected to the original machine. It may solve your problem.

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Win XP with Windows\system32\config\system error message unable to restart in any mode.

  I have a desktop computer Acer, about 4 years old, running Windows XP SP2. When I started my computer, it does not boot in any mode, and I get this error message:

  Windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can attempt to repair this file by starting windows setup using the original setup cd-rom
  Select 'r' in the first screen to start repair.

  I don't have a Setup disk and wonder if it would help in all cases. Any ideas?
  You can not download configuration online info. I have a second XP computer which is supposed to have access to the configuration file in the Add/Remove Programs section, but I don't have any tab to create a disk for installation here. Do you know where he's hiding on this computer? If not, can I get a copy of this MS installation disc?
  Thank you

  Thank you

  Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     copy c:\windows\system32\config\default c:\windows\tmp\default.bak

     delete c:\windows\system32\config\system
     delete c:\windows\system32\config\software
     Delete c:\windows\system32\config\sam
     delete c:\windows\system32\config\security
     Delete c:\windows\system32\config\default

     Copy c:\windows\repair\system c:\windows\system32\config\system
     copy c:\windows\repair\software c:\windows\system32\config\software
     copy c:\windows\repair\sam c:\windows\system32\config\sam
     Copy c:\windows\repair\security c:\windows\system32\config\security
     Copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit the Recovery Console. Your computer will restart.

  Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

  If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

  batch regcopy1.txt

  With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

  Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

  1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
  2. Press the F8 key.

     On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

  3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
  4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

  In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.
  2. On the Tools menu, click folder options .
  3. Click the view tab.
  4. Under hidden files and folders , select Show hidden folders and files , and then click to clear the Hide protected (recommended) operating system files check box.
  5. When appears in the dialog box confirming that you want to display these files, click Yes .
  6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
  7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

     Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

     Note You may receive the following error message:

  C:\System Volume Information is not accessible. Access is denied.

  If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

  309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
• Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
• Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
  C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
• Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
  • _REGISTRY_USER_. DEFAULT
  • _REGISTRY_MACHINE_SECURITY
  • _REGISTRY_MACHINE_SOFTWARE
  • _REGISTRY_MACHINE_SYSTEM
  • _REGISTRY_MACHINE_SAM
• Rename the files in the C:\Windows\Tmp folder as follows:
  • Rename _REGISTRY_USER_. DEFAULT DEFAULT
  • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
  • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
  • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
  • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

1. Start the Recovery Console.
2. At the command prompt, type the following lines, pressing ENTER after you type each line:
   del c:\windows\system32\config\sam

   del c:\windows\system32\config\security

   del c:\windows\system32\config\software

   del c:\windows\system32\config\default

   del c:\windows\system32\config\system

   copy c:\windows\tmp\software c:\windows\system32\config\software

   copy c:\windows\tmp\system c:\windows\system32\config\system

   copy c:\windows\tmp\sam c:\windows\system32\config\sam

   Copy c:\windows\tmp\security c:\windows\system32\config\security

   Copy c:\windows\tmp\default c:\windows\system32\config\default

Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Start and then click all programs .
2. Click on Accessories , then System Tools .
3. Click System Restore , and then click restore to a previous RestorePoint .

Good luck! Please rate me upward if you find my post helpful. Thank you!

• Start the custom of MacBook in any mode or recovery (white screen)

  MacBook Pro late 2011 with El Capitan

  My macbook does not start in any mode. There is just the usual startup chime and after the apple logo bar progresses about 1/8, a white screen appears and stays like that. I tried leaving on the white screen until the death of the laptop. Load again and same result.

  I tried to boot mode safe, progress bar went a bit far, but same result.

  I tried to boot into Recovery Mode, same result.

  I tried recovery of the internet, it downloads completely, apple logo appears, progress bar screen implemented site, black, then back to the white screen.

  I tried the single user mode since I can't boot into recovery mode and using the AF - of fsck command, until he says seems to be ok. then by restarting. Did not help.

  Tried to reset the NVRAM, no change.

  From time to time when it starts. I see that kernal_task uses high amounts of cpu and memory. I tried to use time machine, but for some reason any he usually read my external hard drive when I try to use disk utility.  So I just use it until the entire screen turns blue and restarts

  Looks like a hardware failure and could be linked to a known problem that Apple has started offering free repairs.  Take a look at https://www.apple.com/support/macbookpro-videoissues/

  I make a Genius Bar appointment or take it to a service provider.

• XP does not restart in safe mode or any mode.

  clicked on "Download updates and shutdown". Morning then tried to reboot and XP does not restart in any mode. Continues to rerun initial time and again, go to the 'mode' screen for 25 seconds and then starts again.

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  And then, if your computer is still infested with hijackware, maybe the updates did not cause the problem? =>

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/fa39a531-b865-4de5-a0fd-2ddc075aacff

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp does not boot in any mode

  I still can't find info on windows xp does not start in any mode.  Keep the loop on the screen where it has the Safe Mode, Safe Mode with network, last Configuration know, etc.  Any solution?  I appreciate your time.

  Do you have household XP No Boot Troubleshooting as stated in the post sticky at the top of the forums?

  They were practically useless, I'm happy that they were taking him down.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank:

  My system worked well until: _.

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• XP Home Edition crashed after installation of updates, will not start in any mode, help!

  Compaq Presario V2000

  After you install the updates, H.E. XP crashed.

  Try to start in safe mode accused the MUPS. SYS line

  press F8 to disable automatic reboot

  Restart in any mode result in the horror of horrors the Blue Screen of Death with the following error codes:

  STOP: 0x0000007E (0x805BA6EC, 0xF79372B8, 0 x 80000003, 0xF7936FB4) and any other information about the error

  RAN on PhoenixBIOS diagnostic test; all tests passed

  Can not get into windows to run restore. Any advice? Have a Compaq I don't have the OS or restore disk (did not come with it). I do try to find a copy of XP itself?

  Thanks for any thoughts!

  Go to the http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/8a2928b5-9fdf-4c40-8afc-edde6b808b79/ wire

• How to turn off my copy of photoshop don't see 12.I disable menu helps, any mode.

  How to turn off my copy of photoshop don't see 12.I disable menu helps, any mode. I tried in expert mode in the editor and disable is not there.
  I have

  In ESP 12 and 13, Sign Out is disable.

• My copyright information are aligned in live mode view, but one time downloaded it goes to the extreme left of the Web page.

  I used stickyfoot for my footer right of copyright, which is aligned in live mode view, but one time downloaded it goes to the far left of the page.  I deleted several times, but he still goes to the extreme right.  If anyone has had the same problem and could you please let me know what was your solution as appropriate?

  I just checked your style.css of css file

  You have a few selectors in it with no clogged cavities} brackets, which will stop the css cascade. Sort this out and at least the footer should align in the Center like your other pages.

  top of the margin: 7px;

  }

  {#aboutdescription}

  Padding: 25px;

  height: 349px;

  Width: 250px;

  background-image: url (.. / images/aboutdescription.gif);

  background-repeat: no-repeat;

• Any merge tool is available for Oracle Forms?

  Hello
  
  I am working in Oracle Forms 10 G.
  I have 2 versions of forms.
  Any merge tool is available for Oracle Forms?
  Pls answer me

  You can merge with the forms tool / Forms API master (I did for hundreds of forms)

  Open the forms you want to merge with the developer compare and different objects appear. Then you have the options "Copy/property of the object again" (ideal form to your left) or 'Copy old object/property' (form left to your right). For program units, you also have a differences Viewer to display the differences between program units the same in different forms...

  Another possibility would be to convert the two XML forms using frmxlate, merge them and convert them to fmb.

• Passage of Oracle Dataguard

  Hi all
  
  We use Oracle10g.
  We have configured the Oracle Dataguard with two databases (a primary and standby).
  We perform a failover, like this for example:
  
  On the primary database:
  

  ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY WITH SESSION SHUTDOWN;
  SHUTDOWN IMMEDIATE;
  STARTUP MOUNT;

  On the basis of data on hold:
  

  ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY WITH SESSION SHUTDOWN;
  ALTER DATABASE OPEN;
  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION;

  So, when I perform this failover, what happens with the main data bases and rescue incarnation?
  Incarnation is updated? No problem with that?
  
  Another question: our idea is to create another database of physical standby on the other server.
  perform a failover for this new physical expectation change your primary role and disable the former primary database.
  no problem with this procedure? no problem with the first database pending created?
  
  Thank you very much!!!

  OK, it's big enough.

  If she was smaller, I would consider a move SCP cold of it on the new server.

  In theory, you should be able to make a pass to the you standby current. With her in the lead role, create a new standby with RMAN duplicate on the new server after changing your listener and tnsnames. Then make another pass and switch the spfile.

  I never did and I would like to test, test, test.

  One of the concerns is the eve runs with a Standby controlfile and this could make this failure.

  But that sense?

  I could set up a few databases to test for something like that.

  In the meantime a few permutations of practice is not a bad idea.

  Otherwise, you could try a clone RMAN of your primary on the new server. It is perhaps the best way to go long term.

  The two latest databases Oracle 10 that I moved were much smaller. I have set up the structure of files on the new server the same as the old server and the closing of the database and move all the files including the spfile and password file using SCP. After a quick listen and tnsnames on both sides, I restarted and Data Guard never missed a beat.

  Also, I moved a database ensures Oracle 10 once and while I do not have a document that I rough notes:

  Step 1 On the primary database 
  
  alter system set log_archive_dest_state_2=defer;
  
  Step 2 On the current standby 
  
  alter database recover managed standby database cancel;  ( Then shut it down )
  
  Step 3
  
  Create database directories on the new server.
  
  ( The FRA, the admin udump etc. and system and data )
  
  Step 4
  
  Edit the tnsnames.ora file on the current primary
  
  Step 5
  
  Add tnsnames.ora and listener.ora to the new server.
  
  Step 6 
  
  Move password and spfile files to the new server.
  
  Step 7
  
  Tnsping both servers
  
  Step 8
  
  Use scp to move the database to the new server.
  
  scp my.host.com:/u01/app/oracle/oradata/ORCL/sysaux01.dbf /u01/app/oracle/oradata/ORCL/
  
  and so on...
  
  Step 9
  
  Double check all files
  
  Step 10
  
  Start the database and enable the standby destination and recovery
  

  It was a gesture of the day before, but a primary movement in this way is very similar. My shop has a fast network and I was able to move a database of 100 GB in about 2 hours.

  You could do a permutation, stop the old elementary school and move it using the SCP. Then when he did raise MOUNT and set log_archive_dest_state_2 = reporter on it. Start the collection and if it work all just switch back to it. This way your old server is ready like the back where everything turns to dust. But with your Eve launched, you have almost no downtime. I would test it a few more times on small test systems.

  Best regards

  mseberg

• Why my Macbook Pro boot used place in any mode but the comments?

  My Macbook Pro almost 5 years, worked very well, then the beech ball began to come a lot and programs would take forever to load. I tried to stop him to restart in diagnostic mode, but it would not closed and just hung up for about an hour.  I hit the power button to force a power down and when I went to turn it on again, it does not start in safe mode or diagnosis.  He goes to the login screen and gives me the choice of my log in or invited, but starts if I select my journal going through the motions leading to the top of the load bar, but before he gets to the end, she stops.  I can start in guest mode and access the internet, but I can't do anything from there.  If I click on the Apple, it gives me the opportunity to go to the startup disk, and when I click it, it asks which drive I use, (only one option, HARD drive), but when I select it, there is nothing there.

  I can't really afford a new Macbook for now, and until the last few days it works very well, so I prefer to get it fixed to the top if I can, so any help is appreciated.

  See you soon,.

  Troy

  Hey there,

  I see your message that you are unable to connect to your user account, even in safe mode.  I would like that you try to start your computer in OS X Recovery and then try to repair your hard drive.  If the problem persists after that, you can reinstall OS X.

  To start your computer from recovery, restart your Mac and press the command and R keys at startup.

  

  Hold these buttons until the Apple logo appears. After your computer has finished starting upward, you should see a desk with an OS X menu bar and window OS X Utilities with the above options. If you see a login window or your own office instead of the utility window, it is possible that you do not press command + R early enough. Restart your computer and try again.

  Choose the option you want to use from the utility window or in the Utilities menu.

  OS X: on OS X Recovery

  Take care.

• Windows XP Professional does not start in any mode

  I have a Dell Latitude D610 & I got it in 2005. Its operation under Windows XP service pack 3 & I do not have all disks is it came with.

  I recently received a security update that I got about 15 files corrupt on the laptop, when I went to check what they where I noticed I had to reactivate or buy the license for the software security so I thought I would like to remove this security software that was on it & replace it with the free version of AVG that I use on my home computer.

  I could not remove security software that I think Microsoft is up so I tried to install the AVG software in any case. The laptop would not download AVG completely, so I tried to manually remove the files that were corrupted.

  Now realizing that it was a mistake, because my laptop won't turn on, show the DELL page & then I see is a black screen, no errors or messages.

  I tried & brings me to the Blue & gray setup page, there is a list of folders as follows, most which have a list of the subfolders:

  System

  Onboard devices

  Video

  Security

  Power management

  Maintenance

  Docking station

  Behavior of PUBLICATION

  Wireless

  I tried & I can see the black & white boot which reads options page:

  Use the arrow keys up and down to move the pointer to the desired boot device. Press [Enter] to boot or ESC to cancel.

  Internal HARD drive

  CD/DVD/CD-RW drive

  Bus card NIC

  Integrated NETWORK interface

  BIOS Setup

  Diagnosis

  I tried & I can see black & advanced options menu white page which reads:

  Windows Advanced Options menu

  Please select an option:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Enable Boot logging

  Enable VGA Mode

  Last good Configuration known (your most recent settings that worked)

  Directory Services Restore Mode (Windows controllers only)

  Debug mode

  Disable the automatic restart in the event of system failure

  Start Windows normally

  Reset

  Return to OS Choices Menu

  Use top and down arrow keys to move to the highest of your choice

  (None of these options work for me)

  I also have triedpressing and and then by pressing . Then release both buttons at the same time. It doesn't matter, I thought it would allow me to do a restore on the laptop.

  Any advice would be great?

  You can try to run the CD created by one of those AV programs and see if that takes care of it, but I am not confident anything but a clean install will help at this point:

  http://www.techmixer.com/free-bootable-antivirus-rescue-CDs-download-list/
  -SC Tom
  -There is no such thing as TMI if you request technical support.

• XP Pro boot (in any mode) on a SONY PCG-TR1MP following SP3 download failure

  The SP3 download failed (or rather just stopped) and at the next reboot, the system offers only std Mode safe, latest config options or start normally...

  Regardless of any selection, the system does not more progress but stays on this screen without visible activity.

  I do not have a repair CD (trying to locate) and as an OEM installation I don't remember if or where this could have. On the plus side the product key is always visible on the bottom of the laptop, if that helps.

  Anyone have any idea if it is recoverable and if so the best way to try out it. It of an old box but the emails I want to recover.

  Thanks in advance

  Mark Wilson, Perth WA

  Hello
   
   
  1. do you get an error message when you start the computer?
  2. What is the brand and the model number of your processor?
  
  Method 1.
  If you get STOP: 0x0000007E error on commissioning, then you can refer to the procedure described in the article below.
  Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
  http://support.Microsoft.com/kb/953356
   
  Method 2.
  Step A.
  If the problem persists then remove service pack 3 from your computer by following the steps listed in method 4 in the article below.
  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249
   
  Step B.
  You can then follow the article below which explains the prerequisites for the installation of service pack 3.
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.