Philips DVD +-CD DVD8881 problem... !

Similar Questions

• Can I install a Philips DVD R/RW drive (DVD8801/96; 9305 046 68096) on my HP Pavilion p6720f desktop computer

  I have windows 7, AMD Phenom he's 840t Quad Core with a dvd burner as the top super multi drive on my HP Pavilion p6720f desktop computer. Can I install a Philips DVD R/RW drive (DVD8801/96; 68096 046 9305) as my second drive burner?

  jherbie77,

  Are you sure of that model #?  I found it listed hereandhere as a PATA/IDE hard drive. Not a good choice!

  That being said, here are my suggestions.

  You need an internal Sata DVD + RW (there be DL mode) and the necessary cabling. Power supply not having a spare power cord Sata, but it wil have the molex 4 pin. You also need a Sata data cable.

  Player $18.99

  cable selection:

  just a data cable, you have found a power cord Sata 15 pin $2.99

  just a power and data in the drop-down list $3.99

• Philips dvd +-rw dvd8631 ata device

  I added a Philips DVD +-RW DVD8631 ata device in my system, ultimate vistas has downloaded the driver but still not play or burn or even work. Well it opens but that's all. any suggestions?

  Your CD or DVD drive cannot read or write media:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060

• HP Mediasmart DVD - Blu Ray problem

  Hi I have a HP Pavilion dv6t-2300.

  Last month I had a problem when trying to play a few blurays with smart media. It was as if the Player tries to rplay disc, but after some time nothing happened, if I tried to update the software, but it shows an error during installation (something on this topic couldn't find a dll file in the folder of mediasmart dvd), I tried to uninstall it but displayed the same problem. After struggling with it, I decided to restore my laptop with the recovery discs.

  It worked, I was able to watch my blurays, but recently the same problem came back. So I did a little research and I found that the PC or device manager sees 2 readers of comics (F and H). I also found that I can see all the files on disc bluray but I can't play any of them media smart dvd.

  I also installed the Power DVD 10 to test as a trial and it cannot read the movies either, it says that the disk has a format of media unrecognize, or something like that.

  So I decided to try to update with the latest version (4.2.4701), but the error I mentioned earlier, appeared once again, I have the previous version (4.1.4328).

  As the media smart dvd worked until now I run only a few updates of windows and the HP updates (like the quick launch buttons and chipset). I wonder if these updates have something to do with the problem.

  BTW: I can watch DVD movies without problem in the DVD Smart Media, the problem occurs only with the BD discs.

  I hope you can help me...

  Thanks in advance.

  You can post a screenshot of what you see in 'computer '?

  You use a virtual drive?

  Here's what yours should look like.

  

  Drive 'E' is the second last next to drive Clone as appropriate so that DVD MS is going to see it.

• CD/DVD Tecra A2 problem

  Was a problem with my carpet * a reader of DVD-RAM UJ 820 S on the Toshiba Tecra A2.

  Was working fine until I tried to copy songs from a CD on the computer, on which he could not complete the operation and seemed at hand making a sort of buzz.

  I cancelled the process and released the CD but although CD I put it it doesn't recognize it and if I go to D: / (CD player) he says the disc has 0 bytes used space and free space of 0 bytes.

  Windows offers everything goes well and I tried to play with the drivers, but of course, as I have the actual driver on a Toshiba CD I can't do anything with that!

  Kudos to anyone who can give me advice,

  Mark

  Hello
  seems to be that your DVD-Ram has a malfunction.

  Just to ybout sure, try to start from a CD or DVD in Dos Mode. If this also fails, contact a Toshiba Service Center for control of your laptop.

  Good bye

• A50 DVD-RAM drive problem

  Hello
  When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
  The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

  I think the update of the firmware should fix it, but I can't find it anywhere.

  Adrian

  Hi Ado,

  Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

  Rudi Bye

• P30: DVD - RW drive problems

  I was recently unable to watch DVDs on my satellite P30 using my DVD player (MAST * a DVD-RAM UJ-820 s). My dvd settings have been set to code 1 when I bought the laptop. Since last week, I get an error message 'Error reading media' when I try to play the dvd. All decoded still play dvd. I tried to use other programs other than the windvd installed and windows media player, but it certainly isn't a software problem.

  Can someone help me with this?

  Hello

  You can try to make a firmwareupgrade of mast * one site!

  But when the disc or only the lens is damaged we must change the entire disc!

  When you are sure that it's a hardware problem, you should contact a Toshiba Service partner. The technicans check drive and maybe change it!

  campino Bye

• DVD Portege 7020CT problem

  Hello
  I have a Portege 7020CT with a docking station. The docking station contains a floppy drive, CD-ROM/DVD-ROM and ethernet connection. I have no CD recovery for this machine. Recently I had to reinstall Windows 98 Second edition using a standard CD of Microsoft, but since then I can't play DVDs on it more. I can play CDs without any problem. I think I may need a driver for DVD decoder, but it is not available for download from Toshiba. Someone at - it ideas?

  the drive in the docking station is a Type CD TEAC 224 and no dvd rom, I have the same problem and I changed to a DVD Rom USB

• Tecra A8 - Mat * a DVD - RAM UJ-problem reading 841S

  I have Tecra A8-143 (PTA843E) Lap, WXP Pro SP2 original. Later, I installed SP3 and the problem with the topic. Finally the time Mat * one impossible reed VERBATIM DVD - R (4, 7 GB) discs, even those who got burned in 'home' with Nero (or record now, I'm not sure), although reed he earlier without problems.

  In addition, the reader can Reed DVD-R and Memorex CD - R Verbatim discs. In the meantime I have installed and uninstalled several programs and we hope that the point is in the configuration, but I afraid that SP3 is "fatal error" and I cannot flee from resettlement.

  It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers? My experience is humble and I'll be very grateful for help.

  Thanks in advance.

  > It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers?
  As noted in the previous announcement the CD/DVD drive is still controlled by Microsoft Windows driver!
  There is no other pilot who could control the STRANGE

  Back to your question;
  There are two reasons why your CD/DVD drive does not read the disc;
  First the disc would be insufficiently supported or the s drive laser lens cannot handle the disc to the stress matrix laser lens could also not be clean
  You could clean the lens with a cotton tip and alcohol
  In my case it helped

• Satellite A135-S2386 - DVD - RAM drive problems

  Hi guys, I have a Toshiba Satellite A135-S2386.
  I had once repaired because it is over heated and died.

  One problem I noticed, the fool who fixed, he didn't put it back correctly, and the DVD player has been hot glued...
  I fixed in March, April. But I'm used to, I can anyway...

  However, there is a significant problem.
  Written DVD player and bed PERFECTLY well in windows, however it cannot not be detected in the BIOS or what not.
  As XPInstallation Windows, Vista install detects it but BIOS can't.

  Can I update the firmware of the DVD-RAM? It's years Panasonic UJ-840.
  Or I can update the BIOS of the machine itself?

  You can boot from the CD? If the boot of CD work, then the BIOS is to see it properly.

  You could try an update of the BIOS anyway, go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Driver DVD ROM & DVD + RW drive problems

  For some reason any time my DVD Rom and my DVD + RW readers had a problem. In Device Manager, I get a yellow exclamation and error "damaged or missing. (Code 39) "Apart from these TWO discs. Can anyone help?

  It is a common problem with the Windows operating system. Microsoft has created a tool to solve this problem. You can run the tool of the Internet link following which will identify the problem and solve the problem:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• T400 DVD/CD player problem

  Someone had a problem where the CD/DVD drive is not working/spin at all?

  For example, when you start normally if there is a cd or dvd in the drive, it will spin, and whenever you insert a new cd in Windows it will turn to read.

  Right now, the drive is not turn the discs at all and I just get a little buzz for about two seconds and then nothing. Does not read the disk, cannot read disks, do not play music cd, nothing.

  Any help would be greatly appreciated!

  burn a cd live linux and boot the laptop with it, if the live cd works then it's a software problem that prevents your scanner working, if this does not work then you probably have a hardware problem.

• Need to Format, any serious, not from Vista DVD with pc problem

  I bought a m8300f HP from Circuit City last year. It's a great PC. I had the fire-dog team (the equivalent of Best Buy Geek Squad) install a nVidia GeForce 8800 GT video card in the computer, because the lack of a decent video card is the only complaint I had. They have done professionally without voiding the warranty.

  It's been a year now, I moved away from this place of Circuit City, and the company will also slowly out of business. I'm here, and my computer is having a problem. It is with direct X or something else like a virus. Be that as it may, I am unable to run 80% of games on my PC (it's almost 30 games old like System Shock 2 and as new as Crysis Warhead).

  This isn't my problem. I do not in the face of that, I'm looking at the Format Office (as I've been meaning to for a month or two now) which will probably solve some problem I have (aka get rid of the virus, where it exists - and I scanned twice - or start over from scratch with direct-X.)

  Here's my problem: I want to format drives C and E of the desktop computer, which normally is easy, HOWEVER:

  1. the office is bought in-store, so I had no DVD installation Vista or Vista Serial Key #. I don't have installation CD

  2. I never had any type of installation CD for my card GeForce 8800 video Circuit City installed without extra cost other than the purchase price.

  3. I have NO installation CD for ANY program, any driver, whatever it is. I have a desktop computer that needs reformatting and nothing more than that. No CD, no papers with n ° of series's. absolutely nothing.

  What can I do? It is even POSSIBLE to format? Can I save Vista and all the drivers required to install once it has finished formatting?

  Or am I "screwed"?

  I look forward to a response and I can answer any additional questions. I have all day free and I have 35 DVD-R and CD - R 50, just in case I have to save something.

  Help?

  Message edited by Wek11 on 02/28/2009 10:07
   
  Edit: I have Word from someone else that I don't need any other CD for my desktop PC. I use the onboard sound of my motherboard. They told me that my nVidia card I could get the drivers on the internet and I could do the same thing for my processor etc. He's right? He said everything I need to worry is to get my vista OS re-installed, and after that the computer runs like new?
  Message edited by Wek11 on 02/28/2009 10:16

  In fact, I just started my pc and found the Recovery Manager of the system that supposedly it resets to factory settings and re installed Vista on its own.

  We'll see if it actually works. Thanks if. I appreciate the help, better phone service who was trying to charge me $ 100 to renew my warranty of the phone support when all I need to know had nothing to do with HP, and everything to do with the way Windows works

• Windows Microsoft XP Dell Philips DVD + RW DVD8631 does not

  Although he said his work properly. This who should I try to do to solve the problem? The scan says error opening drive D.  also the reader in the Properties section says that the disc is full?

  Hello
  
  1. this happens with some special DVD?
  2 How long have you been faced with this problem?
  I suggest you try the steps and check them off below.
  Step 1: Try to perform automatic Troubleshooting Services and check.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems
  Step 2: You can also try the other troubleshooting steps provided in the article below.
  Reference: http://support.microsoft.com/kb/321641
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Creating Windows dvd with the problem of the "invalid class string".

  When you try to burn a file to a dvd using windows dvd creation, I received a message 'tring class not valid' when burning, and the disc has been ejected. What does the message mean? How to fix?

  Hi KEVINQUACH,

  1. When you have the startup problem?

  2. you remember to make changes to the computer before this problem?

  3 - is this happen when you try to burn any type of particular file?

  You can check out the following link and try the steps suggested by Aziz N Support Engineer on December 2, 2009, and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/cannot-create-dvdinvalid-class-string/24d00965-F971-4982-A440-8bb01fc0db01

  Hope this information is useful.