PhoneGap windows dekstop app won't load

Similar Questions

• Airport Extreme control app won't load on EL Capitan

  Two questions really.  I was looking for a complete manual for the AIrport Extreme, so I could find our wha that the capacity is before, I bought.  All I could find were manual installation.  Same story when I rang Applecare. It appeared that the only way to access the settings needed to run the application.  I downloaded the app and try to start it upward, hoping that it would require not just to know where was the Alex.  It was worse that the one - the app doesn't load, complaining that it was incompatible with my system.

  (I'll point out here that the only reason why I'm running that el Capitan is because of a run-in earlier with support Applecare who assured that the problem should disappear if I installed 10.11.)  It does not and it took four or five calls before I finally made to someone who knoew what he spoke.)

  So my first question remains: how will I know what the range of parameters for an Airport Extreme?

  Airport utility is built into Mac OS... you don't need to download or install any.

  Look under applications and directory of public services.

  But that won't really help you... the airport must be in the network to show you the real details.

  What exactly did you know?

  Let me assure you that the airport has a minimum of controls... really simplified.

  I have a Time Capsule, which is the same as the Airport Extreme, but adds the hard drive internal... to the extreme, you can add a USB drive.

  So here's a few screenshots.

  Short summary page.

  

  Summary page. Monitoring of each tab...

  

  

  

  

  

  

  

  Some menu options change if you select DHCP and NAT, for example.

  

  

  So miss a lot of what you might consider options...

  Read the review of the extreme on Smallnetbuilder for an overview of typical testers of routers.

  http://www.SmallNetBuilder.com/wireless/wireless-reviews/32158-Apple-Airport-ext magazine 80211ac-reme

• Windows 8 update won't load

  My computer Windows 8 acted as weird after I have updated to 8.1 that according to me. Windows Movie Maker does not recognize the files that it used to recognize. My Google Chrome acted a lot, just like my files. But the worst is that I can not reset my computer to factory settings to solve this problem. When I try to reset it to factory settings, it just says, "no changes."

  It is very frustrating and so now I have to see if my computer update will fix all this. My computer tells me that I am due for an update when I login, but when I go to

  Settings PC > Windows Update

  The Windows Update screen will load, load and load and I'll it let it charge for hours and hours, but it keeps loading. Never, he shows me the update I need. There is also no error code for the update because it won't load at all.

  It's frustrating because I don't understand why I can't reset my computer completely or update. I did the research for hours and hours to solve this problem and I became irratible trying to fix computers.

  I think that all this comes from the update and I can't fix it. I had a lot of people try and fix it, but usually, I'm able to fix computers or searching for the answer to fixing it, but not this time.

  If someone knows the solution to this problem, feel free to respond. I ended up getting tired of all these questions and I don't know what else to do.

  Thank you.

  Hi Kaitlyn,

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer? (So that I can help you find the device drivers on the site of computer manufacturer)

  2. what measures all troubleshooting have you tried?

  This problem might have occurred because of these reasons:
  1. lack of Windows updates.
  2. If the device drivers are not updated.
  3 corrupt system files.

  Before you start the troubleshooting steps allows you to download and install the latest device drivers for all devices in the computer manufacturer's website. Check if it helps. If the problem persists, try the steps listed here and see if it helps:

  Method 1:
  I suggest you to reset components Windows Update, which fixes corrupted Windows Update components and help you install Windows updates.
  

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  
  Method 2:
  If the problem persists, I suggest to start the computer in Mode safe mode with network and check if the problem persists or not. If the problem does not occur in Mode safe mode with networking, you can set up your computer in a clean boot and check if it helps.

  
  Step 1:
  Start the computer in safe mode with network. In Safe Mode with networking starts with a minimal set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not occur in safe mode with network, try step 2:

  Step 2:
  Set up your computer in a clean boot state. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  
  

  Method 3:
  If the problem persists, you can run the audit and the auditor of file system (CFS) tool if this solves the problem. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Windows 8 news App won't load

  The application of new worked fine when I first came to windows 8, but for some reason some it does not load now.  Whenever I click on it, he goes to the store and said that your applications have been installed.  I have already updated applications and synchronize licenses.  I also ran the modern UI App store but not luck.  It does even the possibility to uninstall the application of new more.  Help, please.  Thank you

  I found that this goes to the app store and clicking on your apps then goes to the application of new and hit install on it corrects the problem.

• Videos in apps won't load is not after the upgrade to Windows 8.1

  Error message saying "the impossible to play video.  Try again. '

  Is happening in the ESPN, NBC News app and NFL Mobile USA app apps.

  All the apps worked fine before the upgrade to 8.1.  All applications are updated.  Windows Update ran.  Restarted.  Still get this message.

  If anyone knows how to solve this problem, that would be great, thanks!

  To solve the problem... Had to go to the Lenovo site to download Realtek audio driver and it worked finally.

• CC app won't load

  Hello, it's been like a week and does not load the app I need to download the programs. I reinstalled it manually but I still have the problem. I need a solution as soon as POSSIBLE cause I need to use the programs!

  It is best to do a clean reinstall.

  Follow the procedure below:

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  Step 2)

  Trash Adobe Creative cloud folder from Applications as well.

  Step 3)

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

  Step 5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  Step 6)

  (1) if it please click on the icon of the Apple menu and select System Preferences, then click Network.

  (2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).

  (3) then click on the Advanced button, then click proxies.

  (4) to the title of "Select a Proxy Server to configure" uncheck all checkboxes proxy, can uncheck "Use FTP Passive Mode (PASV)".

  (5) then click on the Apply Now button.

  ( Step 7)

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• When I try clicking on my start in windows mail page icon, mail, or the app won't open and instead this system32 folder opens.

  Original title: windows problem

  someone has an idea, when I try to click on my start page icon in windows mail, the mail or the app won't open and instead opens this system32 folder.  I don't know what the problem is?  I bought Kaspersky and it works constantly to keep my computer which, incidentally, is like 7 months safe and secure.  Someone knows what's going on and or how to solve this?  also, when I open the file in windows Explorer, it is immediately as does not.  to frustrate and the computer runs very slowly because of these problems?   HELP HELP HELP...

  Try to test in safe mode, and then try to test in a clean boot.

  How to start Windows 8 in Mode safe
  http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-AU

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  What happens if you create and test with another Windows user rather than your current user?

  Create a Windows 8.1 user account
  http://Windows.Microsoft.com/en-AU/Windows/create-user-account#create-user-account=Windows-8

  Using the Task Manager, take a look on the Details tab and see what program uses all CPUS.  It will be the program that slows down your computer and your slowness of cause.

  How to use the new task manager in Windows 8
  http://www.howtogeek.com/108742/how-to-use-the-new-task-manager-in-Windows-8/

  I know you have Kaspersky but it might be time for a second opinion.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  They are manual scans and only run when you tell them to do.

  See if the program can diagnose any problems with applications and correct.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

• Whenever I start my computer, I get a pop up that says windows configure app tray and it won't go away

  Whenever I start my computer, I get a pop up that says windows configure app tray and it won't go away what is it and how to make it stop no matter what I do it won't go away

  Original title: trayapp

  You have the software of HP Imaging/photo? See - http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/trayapp-keeps-popping-up-when-i-turn-on-my/37e62be5-9899-4136-80d4-d6df6a30305d and http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/trayapp/51517a32-6779-4490-9714-efa4c75dfca9 of the previous messages for example.

  If so, this peut help - http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00811375 or ask HP on their forum.

• first elements 8 won't load on my windows 8

  first elements 8 won't load on my windows 8

  Try running it in compatibility Win XP mode.

  Mylenium

• Windows Vista won't load on my computer

  My Windows Vista computer does not load upwards after I log in.  As soon as I connect you I get an error message: "Windows Explorer has stopped working" followed by "Restart Windows" and then it never restarts.  I soon begin to receive error message that State that the other programs that try to load do not have managed to do.  I tried to reboot in safe mode, but I also have the same problems in safe mode.  I try to run a restore msconfig.exe and system, but the error messages will be displayed until I can get the controls and prevents me from doing anything.  The problem began Tuesday night 03/08/10 after I installed a router on my modem for wireless internet for laptop of my wife.  The router is a D-link router.  I think I might have to reinstall Windows vista, or at least try to fix it, but I was not apparently received a Windows Vista disk with my computer when I bought it from Best Buy.  Very frustrating to be sure.  Any help would be greatly appreciated.  Thank you.

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Apps are not loading on ATV (3rd generation)

  Apple TV 3 rd Gen will load all the apps. The three I've tried are Crackle, Netflix, ESPN and ABC. It is not always the initial page that won't load, but somewhere along the way to watch a show they get stuck on a turning wheel. I tired the following:

  Speed of network/download tested on ATV (it's good).

  ATV remote, then unplugged for a minute.

  Power Bike ATV, router and modem cable.

  Hard reset modem to factory settings and only a WEP security.

  In ABC, I removed my TV provider login. When I try to verify access, test load screen, however there is no specific code (it is just a black space where a code would normally show).

  All very weird, and it doesn't seem to be a WAN problem, since none of the questions similar not it relates.

  Any ideas?

  Follow-up: ESPN charged after sitting for about five minutes. In ABC, TV provider audit shows two or three characters should play the wheel of Fortune to guess the rest!

  Something with TimeWarner cable, may well be that he is working through the site to watch ABC. Download speeds are synchronizing 10-14 Mbps.

  Thanks for your suggestions!

• My toshiba satellite won't load my new battery, or former

  ORIGINAL TITLE: battery

  My toshiba satellite won't load my new battery, or the old, the icon shows activity concluded for a few seconds then it stops

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I can not open all of the Windows 8 apps including laptop settings and store:

  All windows applications installed with the OS won't launch

  The activation of the windows.immersivecontrolpanel_cw5n1h2txyewy app! microsoft.windows.immersivecontrolpanel failed with the error: this application has failed to launch because of a problem with its license. Please try again in a moment. See the Microsoft-Windows-TWinUI/operational log for more information.

  I can't start same laptop settings to install a clean operating system.

  Support Microsoft says I need to reinstall windows from scratch?  Great productivity tool.

  Try this

  cmd open open with the ADMINISTRATOR:

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\camera\AppxManifest.xml

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\FileManager\AppxManifest.xml

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\ImmersiveControlPanel\AppxManifest.xml

  Now you can open the change pc settings, now you can refresh your pc, it worked for me

• Windows 8 Apps (Netflix, Hulu, Youtube, TuneIn) will not leak

  Windows 8 Apps (Netflix, Hulu, Youtube, TuneIn) will not leak

  I have advanced and updated the OS on my ASUS G76VW-DS71 to Windows 8. Everything seems to work fine, except for on the thing:

  None of the applications (Hulu Plus, Netflix, Youtube, TuneIn) continuous flow actually do anything. The apps will turn on and I can select a video, but when I press on play streaming won't start (Netflix get stuck on 97%). I can listen to all the services if I use a web browser but not Windows 8 applications. In addition, the Skype app stops immediately when you try to open it.

  Any ideas is what is the cause and how to fix it?

  The Windows Firewall will allow apps to pass through. I also disabled, but it did not help.

  I solved it!

  It was my video card driver. I have an ATI Radeon HD 4870 and I * was * installed Catalyst Legacy 12.6 of driver for Windows 8. Then I ran the Windows Installer of catalyst 8 version and select uninstall to remove all driver AMD components. Rebooted as directed, and installed a Windows driver. This driver allowed video!

  Then I tried to reinstall the version of Windows 8 of the Catalyst driver - and did not yet reading!

  I'm going to do some further study and update this post.

  Update:

  The driver that Windows installs that works is "ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1)", dated 19/06/2012, version 8.97.10.6.

  The driver provided by the supposed Windows 8 Catalyst driver package is "ATI Radeon HD 4800 Series", dated 07/03/2012, version 8.970.100.3000. For control purposes, I installed just the driver, not the software.

  Immediately after installation (no reboot was required) Netflix then gives an error code that there is a problem with the internet connection. Of course, the internet connection is fine.

  When I reboot, Netflix returns to its State at the death-to - 97%.

  Yes, up to what AMD Gets their act together:

  1. Uninstall your video driver using uninstaller AMD.
  2. Let Windows Installer for you.
  3. If you want other AMD software, run the catalyst on Custom Installer and make sure that the AMD display driver is not selected.