Photo screensaver lags when you try to wake the computer

Similar Questions

• Photo Story 3 cannot join the audio of the video program, get the error message, even when you try to select the files audio mp3

  Photo Story 3 impossible to join several video (audio) to program songs that has been created, an error message that it cannot accept the format audio, even when you try to select the files mp3 audio.

  Hi BeverlyHeuer,

  I suggest that you convert the music file to convert it into .wav format and check if you can contact.

  Photo Story 3 for Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/photo-story-FAQ

• Portfolio crashes when you try to build the cover page of an image imported via Lightroom sync project.

  The title says it all.  While you can import images into a new project through Lightroom mobile sync when you try to create a cover image for the project, you can select one of the imported images, but when you try to apply the portfolio crashes.  The only way to go beyond this stage is to import them separately a jpeg.

  Another problem with imported via Lightroom photos mobile sync, it's that the display full screen obtained by double clicking on the image in the project is not centered on being right-justified display.  There seems to be no way to change this behavior.

  How to overcome those problems?

  Just tried again this morning and guess what it worked perfectly.  Only difference I can see is that Lightroom is running and who claims to be always sync when I had the problem and this morning when the problem went away Lightroom was off.  Incidentally, if you want to report bugs that you must go to the portfolio help page and ask a question.

• Firefox 36.0.1 on a Mac running Yosemite 10.10.2 crashes when you try to open the Add-ons Manager

  I am running Firefox 36.0.1 on an iMac with Yosemite 10.10.2. Firefox works fine except that it freezes and I have to force quit the application whenever I try to choose modules in the Tools menu. I've never had this problem before. This problem happened for three consecutive days with my iMac rebooted several times. The same problem occurs when you try to access the modules from the open menu icon. Does anyone have a solution? Thank you!

  If you put this in the url bar: subject: addons
  This also happens? If this isn't the case, add the back icon and remove it to reset.

  • Customize controls, buttons, and Firefox toolbars

  It also happens in Mode safe?

  • The problems of Firefox in Mode safe

• get a message that firefox is outdated, but when you try to update the download is the same version on mac os

  get a message that firefox is outdated, but when you try to update the download is the same version on mac os. The version is 34.0.5. As soon as I run the brwswer, I get the update message.

  Your list of details of the system shows a user agent which has been modified by the Fast Browser Search (FBSMTWB):

  • Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6. en-US; RV:1.9.2.13) Gecko/20101203 Firefox/3.6.13 FBSMTWB

  You can remove possible user.js and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• 42 error code when you try to delete the file

  PDF file which can be opened and read.  However, when you try to delete the file, error file not found 42 made its appearance.  MacBook Pro computer

  Please relaunch the Finder , and then try again. If there is no change, restart the computer.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn

• When you try to open the AOL software, I get the runtime error message

  When you try to open the AOL software, I get an error of execution as follows:

  Program C:\Program Files (x 86) \AOL Office waol.xe 9.7

  When contacting Dell to resolve this problem, told me to contact Microsoft. I have no problem with Internet Explorer. It is only with AOL.

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  I suggest you try to uninstall then reinstall the program and check if this may help.

  Step 1: Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2: install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program

  For more information, see the following link:

  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=54116

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

  Hope the information is useful.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• LDIF syntax error: what is the reason of this failure when you try to import the new user

  What is the reason of this failure when you try to import the new user, followed the book syntax

  C:\Users\Administrator\Documents>ldifde-i f Newusers.ldf
  Connecting to "practice01.testa01.com".
  Registration as current user using SSPI
  Import directory of the file "Newusers.ldf".
  Loading entries.
  There is a syntax error in the input file
  Failure on line 3.  The last token starts with 'C '.
  0 entries modified with success.
  An error has occurred in the program

  Hello

  The question you have posted is related to LDIFDE with Active Directory in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://TechNet.Microsoft.com/en-us/default.aspx