photohshop don t print,

Similar Questions

• Windows 8 don't print a report with Quicken 2006. The message is "the PDF driver is not found.

  Just bought a new computer laptop operating system windows 8.  Taken some getting used to but it is to be expected.

  I ran Quicken 2006 since 2006 on \vista without problem.

  Windows 8 don't print a report.

  The message is "the PDF driver is not found.

  Any ideas?

  Thank you

  Rick

  Original title: program programs Application Applications compatibility

  Rick

  It seems that there is no driver installed pdf for quicken.  Your best bet is to contect for the pilot to win 8.

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• Can I have 'Don't print' layer option?

  I have a lot of animals which is not intended for printing as text to generate the table of contents only not to print. What I do now, it's put on a layer "not for printing" and hide the prior agreement of primer. It would be nice if I can just mark this layer with the option 'don't print' and I can't remember hidding before printing.

  Right-click on the layer in the layers panel, choose "Layer Options" and uncheck the box 'print '.

• I have Mozilla Ffox on a Dell Vostro Desktop computer, connected to a HP-Officejet 6500. The printer prints internal drive, but don't print Web sites. The printer ejects only a single sheet of blank paper.

  The version of Firefox 4.0.1 and Windows 7 operating system are
  correctly identified below.
  Still, my printer prints not websites, including Yahoo mail. The printer seems to respond to Web sites, but only ejects a single sheet of blank paper when printing is initialized.

  Just to be sure, everything is covered:

  1. Reset you all the preferences of print.printer , as indicated in brackets in step 2, who were in "BOLD", not only print.print_printer preference?
  2. You you exit Firefox (Firefox button > exit OR file > exit, if you use the Menu bar), and then wait a few seconds and restart Firefox before testing the change according to step 4?
  3. I have a HP 6200 series. Don't forget, if yours is a multifunction printer that you have NOT enabled the fax (i.e., "HP Officejet 6200 series" NOT 'HP Officejet 6200 series fax') in the name field of the printer on the screenshot (CTRL + P).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• LaserJet 500 m551 no project don't print option on Mac OS x 10.7

  We use a range of HP LaserJet 500 m551 color printers in my office and it takes too long for the photos to print. When you print a picture of a Mac OS 10.7 (jpg) images, there is no option to print a "draft" or the low resolution copy. The only option is a 1200 dpi or 3600 which takes several minutes. I have looked in the setting of printer options and don't find paper quality, management of the colors that are not useful for this purpose.

  We have the prints in color printing on plain 8.5 "x 11" page, so choose a grey scale or black & white version is not only useful. We need to print these quickly so that our staff can consult the arranged on tables for selection purposes.

  All of the Apple software is up to date, and the HP printer driver is up to date also. Most of the photo files are large - 2 MB or more - allowing for high quality printing on a press when selected for our magazine advertising.

  When I print the same photo from a PC, I have a version of the project option and begin printing immediately.

  By HP support by phone, I was told that it is a limitation of the application or the program and not the printer. That makes sense (iPhoto on the Mac vs. Windows Live Photo on the PC), however, our previous HP LaserJet printer offers a print project option in iPhoto that suggests a limitation of the driver for me.

  We will replace the printer by another speeding up the Mac printing unless this can be resolved. Help is appreciated and/or a printer recommended for the Mac.

  Thank you

  Mary

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps.

• LaserJet 1022 don't print Windows Explorer 9

  LaserJet 1022

  Windows 7

  When I have updated to Internet Explorer 8 to 9, I can't print with my Laserjet 1022. This printer works with all my other programs.

  I get the following error message: an error has occurred in the script on this page.

  Line: 2126

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  It looks like IE9 dislikes the print driver for your printer. The fix for this would be to uninstall IE9, or use a different browser like Chrome or Firefox (both linked below). A solution would be to use a different print driver for the printer. These instructions are below. I don't know which driver will work as a good replacement then you may need to try a few. Hope that helps.

  Chrome:
  http://goo.GL/MAqrN

  Firefox:
  http://goo.GL/7ICv2

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9 select a Laserjet driver form the list. You may need to try several to find a working one.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

• 309g are all cartridges to be installed when the don't print as black?

  I have a 309g printer - and my partner took all cartridges leaving the printer useless. I bought and put in a black cartridge HP 564XL black. The screen says 'Ink cartridge problem' the following carts seem to be missing or damaged.

  Are all THE 5 cartridges required to install for the printer to function? Only one - the cartridge black-being installed for the printer to function does Seems to me, it should work. Thank you

  Yes, you must have all of the cartridges installed - and it is actually not good at all to leave the printhead without cartridges installed. When you install all the cartridges, you may need to perform a cleaning to get the print head working properly. Don't let your partner do this again!

  If you want to print using black only, should be a setting in your printer driver to "print in black ink only.

• DeskJet D2660 - errors Windows 8.1 - don't Print - out

  Hello!

  I have a HP Deskjet D2660. I have a Dell

  Inspiron 15R 5521

  . I have Windows 64-bit of 8.1.

  When I try to print a document, or PDF printer will sometimes just leave the document in the queue and change the "status of mutiple symbols such as *! ^ #% ~ ~ * & instead of saying "printing error, deletion, etc...". Sometimes the HP Solution Center will send a pop up and tell me that the printer cannot print. Sometimes, I get an error of communication. But no matter, I am unable to print whole pages. When the printer decides it wants to print it will show 1/4 of the document and stop with a pop-up that says "unable to print document" Center of HP solutions also appears and says the same thing.

  I tried the "guided" solutions I stopped and restarted the "print spooler" from Device Manager. I have uninstalled and reinstalled my software to print several times as deleted and reinstalled all the drivers of hp associated with this printer model. I ran the HP program doctor. I used the "HP Updater" that tells me that there is no update and I'm updating. All this without result. I need a solution that works and I need it as soon as possible. I'm at the point where I'm ready to take this printer and run it with my truck because being able to print is a very important aspect of my office at home I prepare tax returns and must be able to print. I don't want to change the printer because the printer has always been reliable and does exactly what I need to do it, PRINTING of DOCUMENTS and. PDF files. But now it won't.

  Please help me to get this resolved as soon as possible! I appreciate all the suggestions that I have not tried!

  Knaus Tax Prep

  To solve the problem I bought a used HP F4180 and it works fine with my system. I guess the d2660 is just old. Thanks anyway!

• hp6700 premium - it is connected to the wi - fi connection - but don't print - what could be wrong

  I try to print but well connected get error message - mentions checking IP address but don't know how?

  Hello

  You are able to print?

• LaserJet P2035 don't print PC programs

  I have already used aa laserjet 1022 but improved to laserjet P2035. I downloaded the drivers 2035 etc from the CD. The printer does not have any internal progrm on my PC print. It allows to print 3 sheets of diagnostics, so I guess that the driver has been installed correctly. I turned on the PC on and off like a yo yo, but nothing of what I have done will encourage the printer to print any of my installed programs - HELP!

  Martin Katz

  You set the default printer? Have you tried running this?
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• HP Deskjet 845c stopped printing in the middle of a job and don't print any more

  My deskjet 845c was printing fine and then suddenly stopped printing in the middle of a page. The power light is on and steady, and the orange light blinks.  I can't print at all at the moment.

  I followed the troubleshooting listed using the HP diagnostic Print and have removed and cleaned the ink cartridges, but the orange light still flashes.

  Any help you could offer would be greatly appreciated.

  Thank you.

  It seems that one of your cartridges has failed.  I don't remember if the printer Deskjet 845c is printed in reserve with a deleted cartrdige mode.  If you then remove the cartrdige color and try to print a test page.  If this works the cartrdige of color was at fault.  Otherwise then reinsert the cartrdige color and remove the black cartrdige and print a test page.  It worked?  If so, the black cartrdige is at fault.

  If the printer will not print with a cartrdige deleted then I would replace the black cartridge with a replacement fee.  My experience suggests that the black cartrdige is usually the culprit...

• don't print from firefox, file is automatically removed from the queue

  I try to print from the web browser firefox or a pdf document and files will not be not print and are removed from the queue after about 30 seconds. I tried the browser google chrome and they print well from there. This problem just started today.

  Make sure that you do not print in a file selected and the correct printer is selected. You can see these settings in the "native print dialog" window when you do {Ctrl + P}.

• Don't print any black ink - HP OfficeJet 4620 - FIXED!

  When I replaced the black cartridge with a black XL version, it would not print.  I went on this forum and saw that some had problems and were unable to solve.

  I ran printing HP and doctor Scan and after cleaning the heads, EUREKA!  It works now!

  Good luck!

  UPDATE: actually, it didn't work.  Some impressions later the printer started doing the same thing - fading out for nothing.  I ran the doctor print again and it didn't work.  Resumes the cartridge and replace it with another 564 HP cartridge and IT is WORKING now!

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.