Photos will not recognize photos when uploading to a website (Wordpress, FB, etc..)

Similar Questions

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Receiver "warning message" that the photos could not be found and that it will not be included, when sending emails with photos?

  Original title: How can I include pictures when I send an email?

  Sometimes when I receive an email with images embedded in the e-mail message, if I send the email, the text is passed, but where the photos were in the original message, there are empty spaces or perhaps some identification confusion of where a copy of the projected image can be kept (I think - not sure). Sometimes when that happens, I get a message "warning" that the photos could not lies and will not be included.

  

  I tried to paste a copy of the warning above - no luck with that either.

  HELP please.

  Hi Bill,

  1 are you facing the question with any specific email account?

  2. the problem occur only when you transfer emails with photos?

  3. What is your default browser?

  4. you see a red "X" instead of a picture on Web sites also?

  Some of the sent emails will not include images when you transfer them again. You can should forward the e-mail as an attachment or, save the images to your system first and then try to attach the photo and forward the message.

  You can also check with your email provider to see if there is an option for "include images with messages" that must be activated.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• my photoshop cs5 will not recognize my canon eos 70 d raw photos

  my photoshop cs5 will not recognize my canon eos 70 d raw photos

  No..  In view of the considerable volume of posts during the last two weeks, I can see why you referenced the 2 7.

  Randy, the D-70 was released after CS6 is released.  Adobe didn't not reverse retains compatibility with older versions of Photoshop - a way to upgrade.  Unfortunately you must use the link above or upgrade to CS6 DNG Converter.

• My IMac will not recognize my LENOVO Tablet

  My iMac will not recognize my LENOVO Tablet

  "Will not recognize" it what, exactly? What you trying to do? Lenovo say when you contacted and reported the problem?

• Satellite L30 will not recognize battery

  Hi guys

  Having a problem with my battery.

  The battery itself is not so old and works in another machine. My current L30 for some reason any will not recognize the battery. When the captain came out of the computer does not use the battery. It sometimes happens with a bright orange at the front as if his load, but he never goes green.

  Other times where the battery icon is in the lower right corner, it has a cross through the battery icon as if it does not exist.
  All ideas

  Remove the battery and connect your laptop to the power running, start Windows and when the OS is fully charged, put the battery in the place again.

  The battery is correctly recognized?

• I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I use a splitter cable, and have verified meter that it is properly connected.  Also the microphone that I try to use the works when connected to a separate Recorder device, so I know who works very well.

  The audio output on a 2012 port does not support the audio input.  You will need to use the USB ports for audio input.  This will require an appropriate hardware and software.

  Ciao.

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• After reinstallings windows xp on dell XPS 420, he will not recognize modem and modem support moved disk

  I have a Dell XPS 420 I got help from this forum - reloaded Windows XP - reformatted successfully in car and now have Windows XP on the drive.  When I try to connect to the internet and set up this internet connection - will not recognize the modem.  When I put the disc inside modem will automatically the configuration menu of the computer.  I don't know what else to do.  I have AT & T internet service that worked perfectly before the reformat Windows XP works fine.

  Hello

  Refer to this link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/XP-SP3-wont-recognize-internal-software-modem/06471daa-c761-4CE3-a8a6-ee01f5629852

  It will be useful.

• my cd player can read cd/DVDs, but will not recognize a cd for copy/writng? Help

  I have 2 drives, both reading and playing, but both say "insert disc" and will not recognize when I insert discs

  try to copy videos from hard disk and trying to copy music from the hard drive.

  suggestions?

  Thank you

  Grant

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Good luck...

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.

• Can my cd-r/dvd will not recognize a blank cd to burn,.

  My cd-r/dvd player will not recognize a blank cd to burn. It will play DVDs and CDs store bought and even burn but when I try to burn one he repeats to me enter a blank cd. that I am using that is empty, I can burn one on my other computer and the game is on a fine, one I have a problem with a dell inspiron 1500.

  Hello Danielbullock29,

  Thank you for your message.  In some cases, the burners will not burn a specific brand or batch of CD/DVD.  Try a different brand and let us know the result.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My windows will not recognize my CD/DVD drive

  My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.