Photoshop CC you see is not all my RAM in Performance suggestions Panel

Similar Questions

• iMac you see is not all 16 GB of RAM installed

  I have a 27 "iMac late 2009. I7 2.8 GHz I had little RAM this Christmas to upgrade the stock 4 GB it came with.

  I put sticks of 4-4 Go inside, but he sees only 8 GB of it. I have re-sit and rearranged the papillotes a few times, but he sees more than half of them.

  Here's what the information system on the memory page looks like:

  

  Could there be an EFI update or something escapes me? I enclose my presentation of the equipment, and

  

  You have installed and reinstalled the RAM sticks and end up with the same results each time.

  By the process of elimination, the RAM is faulty, or you bought by mistake 8GB instead of 16. (Or the seller has sent you the wrong amount of RAM, which is a real possibility...) In any case, you would better check your receipts, then (if necessary) call the seller to tell them there is an error. Many suppliers have a no questions asked return policy for a few days or a few weeks after the purchase.

• Windows XP, you see only not all files in Windows 7 shares

  I see an embarrassing problem that occur on two different sets of machines on different networks.  The initial symptom that led me to study was that software synchronization third laptop XP Pro SP3 computer a user has acted improperly, saying that some files in directories on a Windows 7 Ultimate 32 bit computer were gone, but they really were.

  I traced the problem in several directories on the Windows 7 machine display incomplete content seen on the XP machine network.

  For purposes of explanation, //Desktop/Folder is a share on the Windows 7 computer, which has 167 files it contains.  If you open this share on a networked XP Pro computer, it shows only 140 files.

  For example, File1.doc and File2.doc are both in this shared directory on the Windows 7 computer.  However, on the XP machine, File1 does not appear in the directory.

  On the Windows 7 machine, File1.doc and File2.doc are identical regarding permissions and attributes.  The only differences are the size and creation date.  Look at the rest of the 27 "missing" files in this folder, the results are the same - I see no difference.  The files are not password-protected.

  I have reproduced this exact behavior with the same data on different machines with the same operating systems.  All machines are completely up to date with respect to updates.  There is no detected malware on any of them.  They are on the same workgroup.

  This change in behavior has happened apparently quite recently that the user had no problem with the synchronization software for laptop until last week.

  Can anyone suggest what could happen here?

  Thanks for your reply, Jonathan.

  I traced the problem to Avast (any flavor).  It turns out that it's a known problem, but not a single notice of too many people.  It is really so when you try to run the software of synchronization between two networked computers and directories that you synchronize are affected by the bug of Avast as the synchronization software performs a very detailed comparison.

  When I uninstalled Avast on the source (Windows 7) XP machine could see all the files in all the network shares.  When I reinstalled Avast, the problem returns.

  I have a ticket in Avast on this problem.

• ESXi, you see only not all volumns of my raid controller

  I just built a server using a motherboard (MBD-X8DAH +-O) supermicro and supermicro (CSE-825TQ-R700LPB) 2U chassis.

  I installed a 2244100-R adaptec controller...

  http://www.Newegg.com/product/product.aspx?item=N82E16816103098

  And 8 Western digital hds...

  http://www.Newegg.com/product/product.aspx?item=N82E16822136514

  I had some problems with my original 5 10 to raid volume. I wiped the raid, created some little raid volumes 1 and rebooted. Now when I go to create a data store, he sees all the volumes that I created. Yet once I rescan/updated adapters and stuff all this standard, he does not see the volumes that I created. What gives? I have attached a few screenshots.

  I don't know what the controller is capable of. Some controllers have the ability to create small pieces of a picture. These pieces (my term) can be called several things depending on the manufacturer. It could be something like 'virtual drive '. You may need to use an adaptec utility disc to do this. Create the table with all your disks, and then create virtual disks after the fact with the utility. The Adaptec docs are the starting point.

• in Farmville you currently have not all messages in the diet of your game.

  You currently have not all messages in your game stream, the error message that I get to Farmville

  URL of affected sites

  http://

  Hello

  You may need to contact the help of Facebook or Farmville on this error message support. Do you get the same error message in Internet Explorer?

• Satellite L350-262 - you see only not WiFi

  Satellite L350-262, you see only not the wireless networks in any place. Can get access to the Internet via LAN. Has suddenly stopped working. Suggestions gratefully received

  Thank you
  Nick

  Can any of you provide the most relevant information?
  Wireless network card is listed in the Device Manager?
  Wireless network card is installed correctly it?
  Can you turn on/off wireless card using the FN + F8 key combination?

  Have you tried to do something to fix this? If so what exactly?

  Hey guys how to discuss something like this if your description of the problem is one sentence only.

• laptop, you see only not printer network

  I'M HAVING THE SAME PROBLEMS, BUT UNABLE TO SOLVE, I ALSO HAVE A DESKTOP COMPUTER, WITH WINDOWS XP AND A LAPTOP WITH VISTA HOME I HAVE A WIRELESS LINKSYS WRT54G ROUTER, MY ROUTER SETTINGS WERE ACCIDENTALLY DELETED, (MY SON CLICK ON THE RESET BUTTON) AFTER USING LINKSYS, I LOOKED UP MY NETWORK AND RUNNING , THEY HAVE CHANGED MY UNSECURED HOME NETWORK AND CHANGED BY ITS ADDRESS IP BY A NUMBER, I CAN'T GET MY LAPTOP VISTA PRINT, THE PRINTER IS 'OFFLINE' DON'T RECOGNIZE PRINTER WHEN I TRY TO ADD A PRINTER, THIS WHAT OTHER SETTINGS CAN I CHECK, I AM LOST WITH HOW ANOTHER PERSON CHECKED CONFIG PAGE ON EACH COMPUTOR NETWORK PRINTER, IT RECONFIGURED PORT? ANY HELP FOR ME? Thank you

  Thanks for all your help aaron, I think I found the problem, the Working Group was the same (which was a problem earlier, but you had me change this before), was sharing, discovery network was on, file sharing was on, I could not even access my xp computor, it turns out it was a firewall issue When I reset my wireless router (don't forget my son reset by mistake, and this is where the problem started), there were a few changes, I noticed that I had 2 firewall running on my xp, my mcafee and my windows firewall, that was the only difference I could find, so I disabled firewall mcafee on xp as my computer vista laptop (when I had a printer connected to the vista I could see it of computor) XP so I'm thinking he had something to do with scomputor xp settings) and now I can see my xp computor and printer as before, not quite sure what, but changes in firewall seemed to do the trick, I didn't even have to install the printer on the computer vista laptop, just showed it as a printer on xp computor the printer works, thanks again for your help

• I update my 2014 Photoshop Photoshop 2015 CC CC and not all scripts are

  I'm updating Photoshop 2015 CC and not all default scripts are loading missing scripts, I use layers in all my projects and it doesn't download (and more).
  I use the Browse button congratulate to run the script, but it is very uncomfortable to do whenever I need. The funny thing is that load my custom Web scripts.

  
  Someone has an idea how solve it?

  I know it's the new update, but there are a lot of bugs that I read and the bugs I staff meeting.
  I hope that Adobe will soon release an update to the fixed a bug because Photoshop 2014 cc worked for me as if by magic.

  Eli.

  Have you looked under file > export in photoshop cc 2015?

  

• Satellite A100-62 of the bios, you see only not 4GiG ram?

  Hello

  So before I bought and placed 4GiG ram in my satellite I looked on the site of toshiba connected and so on... found my cell phone and I noticed Max ram is 4096 M, great, I thought, off I went and got 4GiG ram and installed 2 giga both to make sure that the ram is not defective "", then when the two sticks has been tested and bios and windows that I have placed both at the same time that windows has "known issue" you see don't not 4GiG ram which is OK by me, I guess, but then I noticed that the bios of the laptop sees 3063 Mb which is * very strang me! *

  When I called toshiba, they said yes, you'll still 4GiG of RAM, but what confused me is if I installed then bios should also show the fact that theres 4gig 4gig?

  can anyone tell me please what continues

  Thank you

  Hello

  already checked the discussions here in the forum? I mean, West search and there are MANY threads on your problem. Please check the forum and you will get your answer.

  Short description of your problem: bios does not display correctly the amount of RAM that is installed on your system, but the RAM is perfectly usable BY THE SYSTEM, but NOT by the operating system.

  Please visit the following link to learn more about the problem of VISTA and XP 4 GIG-> http://www.brianmadden.com/content/article/The-4GB-Windows-Memory-Limit-What-does-it-really-mean-

  See you soon

• Not all usable RAM

  Hey, I just reinstalled Win7 on my computer and for some reason any, it uses not all of my RAM. For example, in system properties it says 2 GB of RAM (1.75 GB usable) ideas?

  p.s. I installed 32 and 64-bit versions, but I know that shouldn't matter with only 2 GB of RAM.

  Your computer is not designed for Windows 7. You can add RAM.
  http://support.Acer.com/acerpanam/desktop/0000/Acer/AspireM3100/AspireM3100sp2.shtml

  Most computers will have an allocation for the reserved equipment. So with 4 GB installed RAM it is common to see only 2.8 to 3.2 GB usable. An allowance to graphics is common.

• You see only not the menu 3d in Photoshop CC

  Hi all

  I just installed the 64-bit version of Photoshop CC on my Dell Inspiron with graphics chip 525 m 1 GB gforce can I Pro 8 64-bit running. The problem is that I do not see the menu 3d. If go to the performance in the preferences tab, I see that photoshop detects my card correctly. What could be the problem? Have they moved the menu somewhere else?

  A clean reinstall fixed the problem for me

• You see do not message notifications iphone6, ios 9.3.1

  Hi, I do not receive text message notifications. I have to keep the text app to see if there are messages of openness. Grand Dérangement. All solutions.

  Thank you.

  I assume that your iMessage works well?

  SMS is usually carrying through and the phone is just a vehicle to make them

  Also, I would check

  Settings - Notifications - Messages - turn it off

  Force restart the phone

  Restart your iPhone, iPad or iPod touch - Apple Support

  Change it back and see if that helps

• New laptop - you see is not the local copy of the library

  I've always had my library (500 GB) on a USB external drive. This has never caused a problem for several years.

  I recently got a new laptop (Lenovo X 250 Windows 7) and I'm working through the implementation. I downloaded the latest version of iTunes... went in the preferences... selected the former library on my external drive folder... nothing. iTunes don't even see.

  After some research on these forums, I followed plan, hold the SHIFT key while opening iTunes to force it to create a new library on the hard disk external. I did it. Then, as indicated, I moved all my media in the newly created iTunes Media folder. Progress! iTunes can now 'see' the library... but all the content is marked with the meaning of the cloud logo I need to download it. So, if I do not have wifi... I can't play any content, even if it is attached everything locally.

  I did a test and click download on a song. The result was iTunes there duplication in my local library by adding a '1' after the title of the song. I checked all the multimedia files are indeed still on the local disk - they are not lost.

  Suggestions on how to get iTunes to consider this as a local library?

  See the following tips for use.

  Make a portable split library

  Fix iTunes for Windows security permissions

  Empty/corrupted library iTunes after upgrade/crash

  If your entire library was starting with the outside so it should be possible to get it working again. If this isn't the case, you can ensure that you build it correctly this time.

  Regarding duplicates see Re: deletion of duplicates in the library. Note that everything in the media folder must be connected to iTunes first for this script to work.

  TT2

• Virtual PC 7, you see only not "Windows XP Home Edition' computer master file

  Hi, VitualPC for Mac Version 7 with Windows XP Home Edition now does not see my main "Windows XP Home Edition' computer file, and when I open the VPC now it asks me if I want 1. Install your own operating system, 2. Installation of Virtual PC for Mac CD, 3. Import from a previous version. Here are a few screenshots. http://home.earthlink.NET/~RV-Jeff/VPC1.jpg.. .it just won't let me not specify the file "Windows XP Home Edition" computer than the file to use/boot from! How can I fix it?

  Jeff

  Is PS why so difficult to find help on Microsofts website? Or FIND the so-called "forums"? I had to get help online chat able to find this page. And this is the strangest looking for 'forums' I've ever seen...

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads  You might have a better chance to find an answer here. I replied because you had no response. I ran Virtual PC and VMware for about 6 months and all sorts of problems installing operating systems. I just wanted to try something new, but he took too much of my time. I went back to the Flash Animation and videos. I hope you find the answer. Good luck to you.

• E3000 you see is not a WD MyBook for Mac 2 TB external hard drive

  Just bought a router from LinkSys e3000 and WD My Book for Mac (+ WD Smartware) in order to save my two MacBook Pro wireless.  The router works FINE for all other wireless and routing functions.

  Bottom line, the LinkSys Router cannot access external drive USB, the same scores if he can 'see' the reader. (By clicking 'claim' does nothing)

  This would have something to do with the functionality of ITS and drivers needed - since I can't add the drivers to the router.

  (1) valid router works by plugging an another WD MyBook essential 1 TB drive (PC version) and the routers sees several partitions.

  (2) worked with support technical LinkSys to check the router works with the journaled Mac partitions and the router worked as expected

  (3) added a FAT on my book Mac volume - still does not work with the router

  (4) plugged my book Mac directly on the MacBook Pro - works fine (actually a backup from two Mac Book Pro both 1 via USB direct connect)

  (5) off VCD - no luck on the router

  Can anyone provide a suggestion before I return this drive to WD?  I'm at my wits end.

  In addition, other that this problem with WD, I can highly recommend the LinkSys e3000.  Seriously HOT router with a huge flow.

  Yes... it's that I'm just understand! : smileymad:

  Please ask PD to put this future firmware support on the list for improvements.  I love the router, but really miss you a market of large target with this omission.

  It is closed for me.   Thank you!

  SDM