Photosmart 8050 with no disk installation for Windows 7. Driver update fails! Help!

Similar Questions

• How can I get an installer for Windows Vista drive?

  Need windows on a drive!

  I have an acer aspire 5315 with OEM windows vista Basic. I want to perform a new installation of this version of windows on my laptop that there have been some problems (multiple annoying windows error codes) and want to start over. I have not provided with an installation for windows cd when I bought this laptop a few years again. I have a license for this laptop windows key but not drive! I am able to get one sent me free I paid initially for windows?  Thanks, Mike

  Hello

  Contact Acer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or ACER Alt + F10 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• Samsung laptop (series 7 times) has improved to a 1 TB of HDD to a SATA Samsung 256 GB SSD. Even with the disk msft key, windows is now "infringement"? Help!

  I upgraded my Samsung series 7 times from the original 1 TB of HDD to a SATA Samsung 256 GB SSD.  I bought this computer refurbished shop ebay with lots of positive comments.  I reinstalled windows 7 Ultimate edition (same computer version came with) and a utility to find the disk key and the installation seem to work very well.  A few weeks later, I started getting messages that my copy of windows is fake - not true.

  Is it a simple case of Microsoft without realizing there are HARD drive, I installed was installed on the same computer or is there something more sinister is happening with the seller or the original owner of the laptop?
  It seemed there was a solution to the problem of one or two members of the forum but the link to download the fix does not work, and I'm not sure it will work for my computer/drive specific anyway.  I have to be very careful with this computer that I use for my small business and I can't afford to speculate and the shot of the thing to the top.  Any advice for a not-very-tech-savvy user would be greatly appreciated!
  Thank you
  -Anthony.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Security for Windows XP KB2779030 update failed.

  I am running XP Professional on my laptop. I get the security update for Windows XP KB2779030 failed.

  Someone at - it solutions?

  Thks, Len

  Hello

  Thanks for posting the request in the Microsoft community!
  We'll get you help with the steps of troubleshooting of this will hep you by installing KB2779030 on the computer.

  Before continuing with the steps, provide us information.

  1. you receive an error message on the computer?
  2. what anti-virus software is installed on the computer?
  3. don't you make changes on the computer before the show?

  To fix the problem try the following steps:

  Method 1:
  Run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Perform a clean boot and check if the third-party software are causing the issue of updating. How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 3:
  Try manually installing updates from the link:
  Update security for Windows XP (KB2779030)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35863

  Please respond with the information. I'd be happy to help you further.

• How to make a basic disk Installation for Windows Vista Home Edition

  I am the 3rd owner of a Dell Latitude D410. I tried to update Windows and I get the error message (80073712). I have searched for and realize that I have to reinstall Windows because of corrupted files. The second owner has never had the installation disc and the original owner could not be found. How to make a record?  Thank you for your help.

  Hello

  you do not have to reinstall vista; you need to do a repair of your error code installation

  read this; There are 3 ways to solve this error code a repiar install being the last

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".

  http://support.Microsoft.com/kb/957310

  and if necessary here is how to do a repair installation upgrade

  You may have to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  and in regards to a relocation complete your operating system if you go to this path:

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  http://support.Dell.com/

  and if you find that you have a recovery partition following the Dell information on the link below to reinstall:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

  Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

  Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  OPTION has:

  • 1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

    2. click on security updates aren't installed properly

    3. on the resulting page, click CONTINUE

    4. Select an appropriate country and language, and then click CONTINUE

    5. click on the option support by PHONE or email.

    OPTION B:

    Start an email from Windows Update support incident request for free

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

• I have a black screen with cursor before logon for Windows 7, 32-bit. Help, please.

  Tried to start in safe mode & start the laptop very well, but once I went back to the startup by default, face the same problem again.

  Hello

  Take a look at this thread and follow the same steps listed in the breast.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-boots-to-black-screen-with-cursor-before/531df029-0dac-4392-9efe-1d35714cf136

  In particular, the bit on a SFC/scannow. Sometimes when you unplug a PC like that, you can damage some essential Windows files. A SFC scan should be able to fix it.

  This link contains a lot of other really good as well troubleshooting procedures.

  I hope this helps.

• How can I re - install Windows 7 on my computer if I ever had the installation for Windows 7 disk? (ENGLISH-SPANISH)

  How can I re - install Windows 7 on my computer if I ever had the installation for Windows 7 disk?
  I have a laptop with Windows 7 installed on it, Original but I do not have the installation for Windows 7 disc, since I bought the computer I had never the disk. How can I re - install Windows 7 without having to purchase another license?
  How I can restore Windows 7 en mi computadora TR nunca he tenido el disco instalacion of Windows 7?

  I have a computer laptop ASUS not con Windows 7 original wont, pero no tengo el disco instalacion of Windows 7, from which the Adquira no he tenido el disco. How I can restore Windows 7 sin tener comprar otra license?

  Your computer may have a recovery partition which is accessible when you first start the computer (usually by typing the key F9 several times will begin the recovery process).

  This will reinstall Windows back to the point when you received everything first, therfore backup important data files (Documents, photos, music, etc.) on external before starting. Be prepaired to reinstall all the software can also be purchased and installed (rounding up of multimedia installation and product key codes).

  For more information contact the ASUS Technical Support: http://www.contacthelp.com/directory/Shopping/Computer+Hardware/Asus?ListingID=342

  J W Stuart: http://www.pagestart.com

• install a video Magnifier mousecam. The installation disk is for windows XP. My PC runs windows 7 and not recognize installation

  I am trying to install a mousecam video Magnifier. The installation disk is for windows XP. My PC runs on windows 7 and will not recognize the .we installation. How can I get windows 7 to recognize the disc

  You can not force the incompatible software to install or work, to visit that manufacturers of equipment/program support site and checks if there is a version compatible win7

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• I will back up everything that I want to keep and do a custom (clean) installation for windows 7 Edition home premium.

  Amount of external hard disk space is required for installation files?   I have a 10 gig and a ceiling of 5 gig on my wireless devices, or am I better off buying the staples or office depot installation disc?

  Hello

  "do a custom (clean) installation for windows 7 home premium.

  You say you want to install Windows 7, NOT Vista.

  It is a better idea if you buy you the Windows 7 DVD and then install it from the media.

  You then save model the work of making a Bootable DVD from the download and you also then have a reliable way to reinstall Windows 7 and repair work on this, if you have the need to.

  Before purchasing Windows 7, make sure that your hardware and software will work properly with him.

  Take some time and these checks:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  FixIt, reboot, try again not useful

  How can I get the security properly installed?  or what happens if I don't?

  Original title: 0x8007F0F04

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/958051