HP Photosmart C309a - but wireless network can not connect

Similar Questions

• I can't connect my user name and password are correct, but I can not connect. I have reset my password, but still I can not connect.

  I can't connect my user name and password are correct, but I can not connect. I have reset my password, but still I can not connect.

  You would do this please: 3-bar menu > Options > privacy > history > and make sure that you put to remember history (and certainly not to remember the story never )

• Photosmart C309a: Want to be able to scan w / Photosmart C309a on wireless network

  I want to add the solution Center HP to be able to scan documents to my wireless laptop.  I've loaded and installed the last HP software for the printer HP Photosmart C309a on my new computer laptop of Toshiba.  I was able to print from Word and Adobe Reader, etc., wireless, but I can't access the printer through the HP Solution Center to scan documents. I am told that installation of the device is not complete.  Then...

  ... When I try via "add a device Photosmart...". "the software detects the printer, but every time I try using (connected with cable) ethernet or wireless, after the network diagnostics, it will fail.  I did at least a dozen times.

  Another laptop with the same software is close is connected via the wireless and works perfectly.  I'm working on that won't work.

  I would try to uninstall, reboot, then reinstall the printer software.  There should be an uninstall icon in the folder/printer HP in the group '' programs. ''

  If you have other software installed HP printer that you don't use I would uninstall that as well.

• Specific wireless network does not connect in Windows 7, but does in Windows 10?

  I have a Toshiba Satellite L750D laptop, it is about 3 years old now.

  I use Windows 7 for a while. Everything works fine to connect wireless at home and more than other wireless networks, but the hours was spent without success to get it to connect to the wireless work (Ministry of education, that's why this included fiddling around with the proxy settings and user authentication options). I got it to connect properly this wireless in the past, but to another school.

  I had given up on actually being able to use internet in my class to improve the education of students.

  I upgraded my computer to Windows 10, then suddenly, following the same steps that we had tried before, my laptop had no connection to detnsw disorders. Hooray, 21st century learning!

  Unfortunately, some of the hardware in my computer graphics or something couldn't handle Windows 10 (or I couldn't manage Windows 10 and what he did to my outdated laptop), so I had to use the restore function, which came back my computer to Windows 7 without having to format my computer and re - install Windows 7 from an external source.

  Now she continues to refuse to connect, even advise that to contact the network administrator.

  It's driving me crazy. What is different between the 2 operating systems that allows to connect without fuss one way and deny the other way?

  I have triple checked everything I could think of that could prevent the connection, including the drivers and my antivirus, nothing helps.

  Is this just a case of Resistentialism that cause me to seriously consider spending the money that I have not currently on a new laptop just so I can show the occasional Youtube educational video?

  Has anyone else had a similar problem, or is it just me?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  The problem may occur if the network drivers are not correctly updated or you need to change the network settings.

  Method 1: Please follow the steps described in the article Microsoft help to the given address:

  Using the troubleshooter from network in Windows 7

  How can I troubleshoot network card?

  Method 2:

  I suggest that you change options for both the systems on the network in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

  -Enable network discovery

  -Turn on the file and printer sharing

  -Turn on sharing so anyone with network access can read and write files in public folders

  -Turn off password protected sharing

  Now, try to map the drive, follow these steps:

  1. click on Start, click on computer and click map network drive in the options under the address bar.

  2. in the drive box, click the drive letter to use.

  3. in the folder box, type \\server\share, where you can type the IP address of the drive to be mapped. For example, if the IP address is 192.168.6.xxx, you type \\192.168.6.xxx.

  4. click on Finish.

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Wireless network does not connect

  "At the time to choose a wireless network to connect to, the computer keeps turning of ' acquire a network address" to "not connected".  Can I have a virus?  The key of wireless network has been re-verified.  The wireless card find several near by network and seems to work very well.  I did not change any system and this just started happening.

  If you get an error message, please report completely, without paraphrasing.

  I know you said you checked your wireless network key, but please try the following (assuming you use Windows to configure your wireless network card):

  1. Open network connections (start > run > ncpa.cpl > OK)
  2. Right-click on the icon for your wireless adapter and select Properties
  3. Click on the tab 'wireless networks '.
  4. In the list of "Preferred networks", select your network and click 'delete '.  Unless you regularly visit other wireless networks or have a specific reason to keep the configuration of a particular wireless connection, I suggest that you remove all entries in the list or favorite networks.
  5. OK your way out.
  6. Go to "View available wireless networks" and connect to your network.

  If this does not help, I suggest to delete again your network wireless in the list of preferred networks (see above), but now utility access to your router configuration using a computer connected to the router by Ethernet and temporarily disable all wireless security features.  As a general rule, only wireless security should be the wireless encryption, but if you have configured additional barriers, such as MAC filters or time restrictions, turn them off as well.

  Can connect you to your router without active wireless encryption?  If so, re - activate the encryption on the router using the Ethernet-connected computer, making sure that you know which has been entered into the router for the encryption key (utility router configuration most show the key to encryption "in the clear" so that you can read).  Then try to connect wirelessly.  When you access the key this time, it should work.

• Users on the network can not connect to my computer

  Since the upgrade to ElCapitan on my computer, my children are unable to connect to my computer from their. They can see it, but when it is clicked on the "Could not connect" message appears.

  I should have written that I can connect to their computer.

• Does not Muse and BC set? I have reset my Adobe ID password, but still I can not connect to BC.

  I can't find a solution to my problem. When I was to connect to BC, I got a message the same every time. I finished my temporary site on Muse and publised in British Colombia. I wan't to publish on the Web site online, but I can't do anything because I can't connect to the home page of BC. I have reset my Adobe ID password, but it still does not work. I'm waiting for solution almost 1 week and ask each one, but I don't have any resolve. Help, please.

  There was an error processing your last request.

  Please go back , and then try again.

  
  

  Hello

  in case you still experience the problem, please check your Inbox, I sent you some instruction.

• I have Sony tablet and also have a Sony laptop. My laptop connect well but my tablet can not connect?

  Let me know how can I connect my tablet to my router, I have already download the latest version of android, but still problems with my Tablet wi - fi

  Hello BrendaLiza,

  Welcome to the community of Sony.

  Try using the procedure described at the following link:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/35139/c/65%2C66/kW/35139

  If the problem persists, contact your Sony phone team.

  http://tablet.sel.Sony.com/1/1/SGPT111USS/ContactSupport

• Windows 7 64 bit laptop on wireless network can not find .inf wired for Canon Pixma iP4000 printer driver for windows 7 32 bit PC

  First of all, I read the thread on the laptop win 7 and win XP PC with attached IP4000.  I have just isn't helping me with that.  I am computer literate network, but I have to be dumbing down, so be specific in a response, you can give it.  Please, do not assume I know something just because it can be public knowledge.  Thank you for understanding my situation!

  New Win 7 64 bit laptop connected wireless to a network home through a Netgear WNDR3700 router.  Wired to the router, it is a PC with a USB attached printer Canon IP4000.  This printer has worked without problem with this PC for years.  Add the laptop.  Try to access the printer on the network (it is set to be shared on the PC) translates into an inability to find the driver for the printer.  On the Canon download site, I downloaded and installed on both machines the driver add-on 'aomwin110ea23us.exe '.  This does nothing to solve the problem.  Then, follow the suggestions in the thread referenced above, I downloaded installed 7 - zip and unzipped the file add-on from Canon.  Guess what? -There is no, zero, nada, stupid ".inf" file in there!  I understand that I need share on the PC to both x 32 and x 64, but without a valid .inf file to point to, I'm sunk.  And the same is true when you try to add the printer to the laptop - not to point to .inf file.  Is the only thing that I have not tried to install the printer directly to the laptop via the USB port, and it's because this is not a configuration that is usable for me.  The printer must be attached to the PC.  Is there anyone out there who can help me solve this dilemma?  Please do not give me an answer telling me to download the driver - usually you tell me precisely what driver and then guide me through the process.  Rest assured that I appreciate sincerely any help you can give me.  Thanks in advance!

  Most likely the name of the driver you are using on XP to share the printer a is not not the name of the 64-bit driver.  The pilots names must match in order to add the printer as a connection to the 64-bit computer using the normal RPC protocol.  You can configure the printer on 64-bit Windows 7 as a local printer that will basically copy the data from the printer to the format to share on the XP machine using SMB protocols.

  This is a Ko for incompatible drivers when connecting XP to NT4.  Replace your server / client configuration, but it's the same process.  Make sure that you are connected to the internet and select the Canon 64 bit driver available on Windows Update (use the Windows Update button in add printer) http://support.microsoft.com/kb/282842

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Wireless printer can not connect

  I just purchased a WRT160n V.3 and the new firmware I have a printer wireless Lexmark x 6570 for a reason any router will not let me connect to the printer called Lexmark and they said security was put on high heat, but I have a WRT54GS with the same security as the WRT160n setting and it connects no problem I use WPA2 Personal rep Lexmark said that my router wouldn't let not the printer create a Mac address in any case around that. Thank you also I get answer weak signal when I put channel 11 that it slows down my computer, I have 3 laptops when its on Channel 9 it seems ok where do I put the Mhz FRO 20 mhz only on auto to get the benefits of speed N or if that is not advisable. Either way, I have a computer laptop N a G and an adapter for N on the last. What is G/B hardware only.

  Problem solved had to delete the old router TCP/IP address and generate one for the new WRT160n. thanks for the help

• Users on the network can not connect

  I have a problem with the network connection, and would be grateful if someone could tell what to check next.

  Try to connect from an iMac under Snow Leopard, just sign in dialog box stirs whenever I try to open a session.

  The customer log shows the following after each attempt

  SecurityAgent [548] display of the Login window

  kernel WARNING: space low (5 < % free) on the audit system of audit log files

  SecurityAgent [548] failed to obtain registration of the user to 'test' for Directory Services

  SecurityAgent [548] user info context values defined for test

  Unknown user (test) SecurityAgent [548] login attempt success for the audit

  kernel WARNING: space low (5 < % free) on the audit system of audit log files

  On the server (running the Server 3.2.2 and Mavericks) he has no message in the newspaper during the connection attempt.

  DNS seems to work without problems. On the control server of the

  Home 192.168.3.100

  Returns the correct host name and

  host [hostname]

  Returns the same ip address.

  Using nslookup to the iMac gives the same results

  The iMac seems to be properly related to the server. Connection options indicates the correct server with a green lamp beside her name and the list of user login has one entry of 'other '.

  The network is wired.

  Verify that the user 'test' exists and that it is the correct type 'network' on the server. Verify that the customer is using the server for authentication. Your the client disk is full, or almost, remedy before proceeding. OS X, like any unix, really don't like do not have the space available on the file system, and this may be the cause of the problem.

  C.

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• DLink Wireless Router is not connected - indicates "unidentified network".

  original title: DLink Wireless Router is not connect when tried for the second time for the initial Setup on Windows Vista Home Basic SP-3

  DLink wireless router is not connect to my laptop. I don't use wireless sound, but the connection to laptop via cable ethernet for the initial Setup, the first time it connected and I did not any changes, because I couldn't time to set this up, so, I turned off on that day and triend to finish installing the next day to my surprise I see this router is identified as 'Unrecognized network' and when I used the CD that came with the router and he says no router not connected. I did something wrong here or its how Windows Vista Home Basic Edition will identify, can you please help me solve this problem.

  Hello

  Perform the steps from the link below and see if it helps.

  Windows wireless and wired network connection problems 

  Hope this information helps.