Two HP Photosmart B110A printers but just a watch onscreen HP Solutions

Similar Questions

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• I just bought and downloaded the two files for 12 items, but it does not appear that I have

  I just bought and downloaded the two files for 12 items, but it does not appear that I have

  Get it fixed... Thank you

  Sent from my iPad

• Photosmart B110a - Wireless Setup Assistant starts whenever it is turned on

  Hi all

  I just spent half a day to set up my new printer wireless HP Photosmart B110a. (CN245B)

  He luckily easy, but ultimately all the software is installed on two computers and printer is wireless connected to the router on my home network. Printing, ePrint, scanning everything works fine.

  With the exception of this problem: I turned off the printer using the power and she handed over after 10 minutes. I've done several times, and when turned on, every time the printer wonder if I want to configure the wireless connection. If I click on Yes, then he begins the wizzard - wireless and the password must be entered again etc. If I click on no, then the printer just starts and runs very well. It seems that he does not lose the connection settings.

  Whenever I turn on the printer with the button, it is from the wireless configuration wizard. Is this a bug?

  How can it be solved?

  Thank you

  Smartyx.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP address of the router to the bridge and the first DNS entry.  Let the second white.

  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart B110a: eprint problems after Windows upgrade 10

  The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

  Any notice received with gratitude.

  Hello @Ticfan,

  Welcome to the HP support forums.

  I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

  The first thing I want to address is the "ePrint + Jetadvantage".

  It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

  The following link will take you to the correct driver.

  You can select 64 or 32 bits depending on your operating system.

  HP ePrint Software

  I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.

• Photosmart B110a yellow ink went Brown (HP364 cartridge)

  On December 24, 2013, I replaced all three colors HP364 ink cartridges in my Photosmart B110a as they were exhausted. (The black cartridge didn't need of replacement). Today (21 January 2014) I noticed that the colors were bad printing; a race of 'print quality' showed that the reason was that the yellow cartridge, while always 75-80% full, was in fact the Golden impression. The withdrawal of the yellow cartridge, I noticed that the stamp was no longer a yellow/orange color, but was in fact a darker tan/brown color. A 364 yellow replacement cartridge and a clean print head have solved the problem, but I would like to know four things:

  1. Is this a common problem? The guy where I bought the replacement cartridge said he had heard of that happens (specifically with yellow HP cartridges and specifically 'Brown printing') front.
  2. Is he likely to damage my printer permanently? Is the oxidation or whatever it is the yellow ink that is likely to cause damage to the print head itself?
  3. If it still happens once can I claim for a warranty replacement cartridge (and if it does not damage the printer at all times can I claim repair/replacement of the printer under warranty although the printer itself, which works perfectly, is no longer under warranty?)
  4. The printer is slightly used. I can avoid this by making a color print (of anything, even a page "print quality") at regular intervals? If so, what type of interval? And if that's the case could it be documented somewhere?

  It is a 'real' HP 364 cartridge (supplied by Argos to the United Kingdom, manufactured in Czech Republic and with a warranty date in 2015), not OEM, not recycled, either said in passing.

  Hello tonyinselby,

  Welcome to the HP Forums!

  I am pleased to learn that you have been able to get the problem solved.

  1. it is very difficult to say whether this is a 'common' problem with the yellow HP364 cartridge. Without the complete troubleshooting with the cartridge, I can't tell what the more precisely caused the problem. Sometimes Yes, like all other products, some have flaws.

  2. no is not likely to cause damage to the print head, you are able to use the yellow replacement cartridge.

  3. According to the guarantee of the cartridge, and the printer warranty. It is possible to have the cartridge, printer or replaced. To do this well you will have to contact HP Support at the time of the question, because I can't guarantee what options are available to you.

  4. with printing in color at certain intervals, this can help with the print quality, as the ink is not just sitting there. Keep in mind also that your printer does its own maintenance as long as it stays on. You can also run a cleaning print head to properly maintain the printer.

  I hope that this answers your questions .

  Thank you.

• Photosmart B110A: Ink cartridges Setup

  Hello world!

  I have reset my Photosmart B110A (by entering the hidden menu) but now when you want to install it and set it up, the process stops because I did not SETUP ink cartridges, but others. How can I fix that?

  Hi @Daniela3,

  I came across this post which, if you want to try it at your own discretion to see if it helps. I'll send you a PM. In the forum next to your handle name, simply click on the envelope to see.

  Thank you!

• Photosmart B110A black does not print

  Hi, I have a photosmart B110A and black stopped printing.  Was working fine before this problem.

  A lot of ink but I have replace the cartridge with a new one and same problem.  A ran all alignment head cleaning tests, etc. Reinstall the cartridge.  Clean the vent on the top of the cartridge.  Powered on.  Still nothing.

  Is there a solution to this problem?

  Hi Ciara

  Thank you very much, this seems to have solved the problem.  Although I have consumed a lot of ink there are now no remains in the cartridges that I will need to replace before I can be 100%

  Thanks again

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• Photosmart B110A: Photosmart B110A - missing HP Support Assistant.msi

  Hello

  I use Windows 10 and I just installed the latest

  version of the software for Photosmart B110A

  from scratch.

  The software always tells me that it is missing

  the file Assistant.msi of taking in charge of HP.

  It says Error 1706, and something about a bad resource.

  I don't know where to find the file or how to

  solve the problem.

  Kind regards
  Martin

  Hi @mploug,

  Welcome to the HP Forums!

  I understand that you are missing the file HP Support Assistant.msi for your HP Photosmart B110A, on the operating system Windows 10. I'm happy to help you!

  Please, try the following steps:

  1. Close the window to locate the file with the message "Error 1706", if you don't have already done.

• How can I disable wireless on Photosmart B110a?

  I had a lot of intermittent problems with the Wi - Fi on my Photosmart B110a, but the USB connection is perfectly OK. I had a few printintouts on my printer from a neiighbour, those unwanted. Please tell us how to completely disable my wireless connection. Thank you, Bill.

  Windows7 64bitAcer ' aspir ' 5732Z

  There is an option to disable the card wireless in the printer.

  * Press the key for the Setup Menu on the front panel of the printer

  * Select the submenu wireless

  * Under this menu is an option to turn on/off wireless.

  I hope this helps.

• HP Photosmart B110a - poor print quality

  Hello

  I have a HP Photosmart B110a CN245B and I use Mac OS X Lion version 10.7.2.

  I bought this HP Photosmart camera in the month of August, I changed the black cartridge once and it worked well. But now, replacing the black cartridge for the second time, I had a few problems. Printing is faded, I can barely read what is written on the page, even if I chose 'Grayscale - black print cartridge only' and 'Best quality'... the print quality is very bad. What can I do?

  Thank you very much!

  I think that the printhead has failed.  It should be under warranty.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• Photosmart B110a does not print another property

  I replaced the cartridges of color with authentic products on my Photosmart B110a.  Until then it worked perfectly.  Now it prints shocking images of color in pastels.  Does not print black which is 3/4 full.  I use a Mac.  I powered by printing, computer, uninstalled and reinstalled and still no luck.

  Test pages print works and the colors appear.  I cleaned the print heads.  I have re-aligned heads too.  Help, please!

  Hi Deelesley, don't know what fixed it but glad to hear it of good feeling back for you.

  FYI, if you have problems again the link below has a lot of support documents & troubleshooting for PS b110a

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&CC=IE&DLC=en&LC=en&product=4022343&tmp_track_link=ot_search

  Ciara

• have photosmart b110a and after the update, it will not print or scan to my office

  have recently bought photosmart b110a and connected wireless for desktop (windows xp) and laptop (windows 7), but after an update is, it prints from the desktop - have deleted the software but left driver installed to try to remedy the situation and made the restoration of the system

  Hi there caleso,

  This is probably a software bug somewhere lets try to download and print and scan running doctor located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening.

  Good luck!

• HP PhotoSmart b110a stops at halfway printing

  When printing from Windows 7 for HP Photosmart b110a cable, the printer starts normally but pauzes at halfway. Nothing happens for minutes, and then he throws the paper and gets a new. Then again, but stops at halfway. Same thing.

  When printing wireless smartphone Android or Ipad I have no problem at all, so the problem is not in the printer I think.
  I already reinstalled complete driver. And the critical update installed on HP site...
  Please help, thx for the Netherlands,
  Steven

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - Photosmart Wireless e-All-in-One Printer B110a - Software & Driver Downloads
  <- set="" to="" your="" vesion="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart Wireless e-All-in-One Printer B110a - Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably still the drivers but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">