Photosmart b309a eprint

Similar Questions

• Photosmart 7525 eprint do not print

  I put eprint in place and when I send something it will not only print the computer says there is a problem and it is supposed to be an error on the printer control panel.  BUT there is no error message.  I have updated firmware update.

  Hi Azegger1,

  Welcome to the HP Support forums.  I understand that you can not send print jobs to your printer Photosmart 7525 ePrint e-mail address.

  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

  You also mentioned that the printer is not printing. To better help you with this, would provide you some additional information:

  (1) is the printer connected directly to a wall outlet?

  (2) you are able to make a copy of the front of the printer?

  (3) what operating system are you using on your computer?

  (4) you are able to print from your computer?

  (5) did you install the full features of the printer software on your computer or you are using the base driver provided with the operating system?

  (6) do you receive error messages when you try to print? If so, are they displayed on the front panel of the printer or on the computer?

  Thank you.

• the hp photosmart 7760 eprint is compatible

  the hp photosmart 7760 eprint is compatible.

  If this is the only compatible printer to HP Photosmart 7760 usb, then no., not eprint. ePrint needs web service, if you need a network connected printer and is supported by the web service.

• Photosmart B110a: eprint problems after Windows upgrade 10

  The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

  Any notice received with gratitude.

  Hello @Ticfan,

  Welcome to the HP support forums.

  I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

  The first thing I want to address is the "ePrint + Jetadvantage".

  It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

  The following link will take you to the correct driver.

  You can select 64 or 32 bits depending on your operating system.

  HP ePrint Software

  I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.

• 5524 photoSmart HP ePrint & misfortunes AirPrint

  Hello

  I recently bought a PhotoSmart 5524 printer to go with a new iPad AirPrint will however not see the printer and HP ePrint will only print the pictures otherwise I get the "Oops, something went wrong, please try again" error message.

  HP printer control panel does not see the printer.

  If I have an e-mail the documents to the printer, everything works fine I just can't print directly to it.

  The printer is connected to a router D-Link DSL-3780 with IGMP active.

  I restarted the router, a printer and the iPad many times without success and that the printer works the latest firmware

  Please help because it makes me crazy.

  Thank you.

  Thank you.

  The only reference I can find for this router will show TalkTalk, so I guess it's done specially for them.  Anyuway, according to the forum of TalkTalk, there's an updated firmware available for your fix.  Usually, when firmware updates are "pushed" to the routers, all you need to do is power of the router and turn it back on so he can install it.  There may also be a way to have control of router for updates.  I don't know how it works in your case, so I would contact them for assistance.

  Here is a link to the thread of TalkTalk: http://community.talktalk.co.uk/t5/Unlimited-Broadband/DSL-3780-and-AirPrint-HP-Deskjet-3050A-Wireless-Printer/m-p/947696

• Photosmart 2575: eprint causes transport jam

  My Photosmart 2575 printer can print the self-test and Windows, but most of the time when I use eprint to android, either phone or tablet, it loads the document and then reports the transport jam. It almost seems like eprint sends a command to the printer is not exoecting. How can I fix?

  Hello

  The HP Photosmart 2570 series is not supported by the HP ePrint software, so you may experience problems.

  You can find the following table with web solutions offered for any model of HP printer, HP ePrint is not supported for your printer:

  http://support.HP.com/RS-en/document/c03722645

  I suggest trying the HP Print Service Plugin that seems to support your printer and check differences using this solution:

  http://support.HP.com/RS-en/document/c04024231

  Kind regards

  Shlomi

• Photosmart 7520: ePrint email address

  I recently bought a Photosmart 7520 refrubished. He already had an email ePrint address in Setup. This is different from the email ePrint I had the installer with my Photosmart 7520 precedent and is still shown in my account when I connect to the ePrint account. How can I change the ePrint on the instrument address to match what I have on my account? Thank you

  Hi Toledo_RD,

  There is no way to match the old printer e-mail ID in your account with a different printer.

  All you can do is:

  1. add email ID in your account or

  2. to register the printer and save it again to get a cool email ID and the assertion according to which email ID on your account.

  I recommend the 2nd way. Because this will give you a fresh email ID and your email ID that is not exposed to someone else.

  Kind regards

  Oliver

• Connexiona Photosmart 5515 ePrint or connected HP fails

  Printer is connected via WiFi to the same network as I type this message.

  Printer received a static IP (192.168.3.235) which I am able to ping successfully of all computers on the network:

  dcanady-x-3: ~ darren$ ping 192.168.3.235
  PING 192.168.3.235 (192.168.3.235): 56 data bytes
  64 bytes from 192.168.3.235: icmp_seq = 0 ttl = 255 time = 1,840 ms
  64 bytes from 192.168.3.235: icmp_seq = 1 ttl = 255 time = 7,015 ms
  64 bytes from 192.168.3.235: icmp_seq = 2 ttl = 255 time = 2,697 ms
  64 bytes from 192.168.3.235: icmp_seq = 3 ttl = 255 time = 2,704 ms
  ^ C
  -192.168.3.235 - ping statistics
  4 packets transmitted, 4 packets received, 0.0% packet loss
  round-trip min/avg/max/stddev = 1.840/3.564/7.015/2.023 ms
  dcanady-x-3: ~ darren$

  This printer comes with the ePrint on that button. By clicking on ePrint and say yes to the activation of the web services and allowing automatic updates, the printer has finally returns the error message that it is impossible to connect to the server.

  Since both a wired and Wireless Windows 7 laptop, which has the complete package installed. can ping, print and scan to/from the printer as well as implement the embedded browser interface and has the installed support framework, try to install the update of the firmware of the printer also fails with the message, this update does not supports all HP device drivers found on this device. You don't need this software. Then it closes.

  Try a solution I read in a previous post that plans to use another DNS server, (the solution recommended to enter the servers DNS from Google, 8.8.8.8 and 8.8.8.4), also fails to try to add data. Try to manually enter the DNS server returns the invalid entry error, if these number unique IPs are preceded by two zeros, or not.

  So, my question ultimately, because the machine is unable to connect to the server, I can never get to the point where I can find the claim code to set up the printer in HP connected, because pressing the button ePrint never gets past the phase of implementation, I can't see any other menu items to the breast or underneath.

  The same machine that I cannot set up the printer, web services has successfully created an OfficeJet 4630 located on another floor in the House.

  Your help to deal with the firmware update, change DNS address and with success to connect to the server to enable connected HP/ePrint will be greatly appreciated.

  Hi @dec33162,

  Welcome to the Forums of HP's Support.  I see that you are unable to install web services on your printer Photosmart 5515.

  When you try to set the DNS servers to Google Public DNS servers, so you set a static IP address first?    If this isn't the case, please set an IP address manually before the configuration of DNS servers manually.

  If you had created an IP address manually and are unable to set manual DNS servers, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

• Unable to get started on my new printer HP Photosmart 6525 ePrint

  I have a MAC 10.7 and just bought a printer HP Photosmart 6525. I try to activate the ePrint but can't find where I sign up and enter the code from my printer to start?

  I get an error message that says submit Ajax failed: 403 Forbidden error

  I understand that you found ajax send error on your computer. I would like to try restarting your computer and return to eprintcenter and try again. After restarting your computer and if its still working if possible I would try using a different browser.

  Let me know if it helps.

• HP Photosmart 6525: eprint center

  I tried several times to log in my Center ePrinter, but he recalled that my login ID is an incorrect email address.  Then when I try to register a new name to logon user with this email address, it was reported as error that this username already exists.

  I don't know that this email address log you name is correct, because I've used it several times before and it's one I had.

  Please advise urgently how to fix it.

  Hey @norseman1,

  Welcome to the Forum from HP Support.

  I understand that you are unable to connect to the HP ePrint Center.  I want to help you with this.

  I don't see this particular error with password resets from time to time.  I have a workaround that can clear up this place for you:

  • Click here.  This will bring you to <www.snapfish.com >.  As the Snapfish site is linked directly with ePrint Center and HP connected, you can try to reset your password as follows - click the connection icon and then "forgot your password":

  

  • Enter the e-mail address that you use to connect to the ePrint Center and click on submit.
  • You should receive a message of automatic reset of password by email - the reset as expected before and then try to use this new password to Snapfish to connect downtown ePrint.
  • If this does not solve your problem of access ePrint Center, please call our Cloud Services to 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.  If my suggestion worked in your favor, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• Photosmart 5524 eprint from an iPad - how to manage the print size &amp; culture

  Hi, very new to this malarkey eprint, you set printer in place and it is printing fine, but how the final print size is not managed and harvest? I lost a lot of paper and ink trying lots of different things... There must be an easier way?

  I have some photos of squares I tried printing... The printer fills them on page a4 but chops the sides off... I recreated the image with white extra borders and it is now very small printing! Arrrrrrrgh!

  Any help would be appreciated!

  Hi there, you are using the print application mobile ePrint or solution AirPrint to print from the iPad? If you want to have the ability to customize print settings I advise to use the print application mobile ePrint. Here is the link to the app in iTunes https://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8

  Once installed on your device you just open the application, select the photo to print and press the settings icon in the top right which will allow that you select paper sizer and orientation, among other things.

  Best.

• Photosmart 6510: Eprint address. How to recover first/old address

  Some time ago I had to errect a new address hpeprint because my jamed address original.

  I want to come back and to use for my first and address much more convinient.

  Is this possible?

  Kind regards

  Bent E

  Hello @Elkjaer ,

  Welcome to the forums of HP.

  I understand that you want to know if you can recover an old address ePrint.

  I'm sorry, but it is not possible to recover an old address ePrint.

• HP Photosmart 5520: EPrint and uable to connect to the aol mail server

  I have an Android device and that you have downloaded HP eprint. It works fine for printing photos and other documents, but I can't connect to AOL mail.

  I read the other posts and tried to change the hostname to "[email protected]", I am using IMAP port 993 and participate in my e-mail address and password that I know are correct. I checked the SSL box to use.

  The only entry that I wasn't sure of is the 'Description' field, because there is no indication on what to put here. Is how important it that are trying to connect unless something is entered here? I just typed "AOL."

  Please help as this is driving me crazy and spent a few hours looking at this.

  Thank you

  Hi Nickb2202,

  That's what you said "Hostname - [email protected] (used)" take the sign @ out and have her take a. Instead, then volia will fix your problem.

  Yours faithfully,

  Ryan

• Photosmart 6520 - ePrint-pilot

  I installed the HP ePrint driver on my laptop (W7 Home Premium 64 - bit), that made me a printer named "HP ePrint. Use the printer on the network works fine.

  It's just that I can't change a great many properties of the printer using this driver. If I try, I just get the choice: [1] #copies to print, [2] 1 or 2 pages per sheet, [3] print grayscale (or not) and [4] printing single or double sided. That's all.

  This is how it is supposed to be (with ePrint)? Is there maybe something that will give me control paper-size, use of colours etc etc? All the things I can control when using the printer via a USB connection.

  Willem Vermeer.

  Hello

• Photosmart 5510 eprint, put in place the problem

  I can't set up eprint by using the front panel on my new wireless printer - it successfully connected to my home wireless network and I am devices able to print from our cell phones and mobile - but when I try to set up eprint by using the front panel menu, it displays an error message - server - unable to connect connection error try again or enter proxy address

  I don't know what my address proxy or where I should look for it - can help you please?

  I am connected to the internet by using Virgin Media broadband via a belkin G wireless router

  Thank you

  Problem 2

  I found the solution to set up my service eprint with his new email address for the printer - however sent 2 emails to print from my Windows Live Mail email account nothing happens: I can not connect via the new e-mail address registered with the printer - even though I have answers to my box saying that the print job has been received and ready for printing

  I can always send and print documents via the print command wireless - then why not via email?

  Can anyone help please?

  Thank you

  Thank you - you're a star - maybe it works - so simple - HP must include in their set up info / troubleshooting?