Photosmart C7280 Scan to PDF

Similar Questions

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• Photosmart C7180 scan to PDF

  Recently I formatted my hard drive and reinstalled everything. I am running Windows XP Pro with SP3 and I downloaded the latest software for my all-in-one Photosmart C7180. I used to be able to scan a document to PDF using Adobe Standard 7, but I can turn it on is no longer. I uninstalled Adobe Standard 7 and installed Adobe Reader XI. Is it possible to scan a document to PDF using the Photosmart software Adobe Reader XI? I have not installed the OCR software, because I really feel that the OCR software is unreliable. I don't need to edit pdf documents or create them. I just want to be able to analyse any document as a pdf and then send the PDF as an attachment. When I open the HP Solution Center and choose to analyze a document, scan-to-pdf is not an option. I know there are a lot of free pdf programs scan, but before we go in this direction, I wanted to see if it is possible to use what I have already installed. Thank you.

  Hello

  The HP software uses the OCR engine to scan in PDF format, if you choose not to install the OCR the PDF option won't be available.

  Run the installation of HP once more and select this option to add additional software.

  Install the OCR application and restart your PC.

  Now you should see the PDF (or PDF that does not actually use the component OCR but simply scan in PDF or searchable PDF as option available) while clicking on scan a Document from the HP Solution Center.

  Adobe Reader is a PDF reader and not a PDF editor like Adobe standard or Pro who provide capability of scanning their duties change.

  Shlomi

• Photosmart 5520: Scan to PDF file names

  Hello

  When I scan for PC:

  JPG--> I get file names Scan50001, -0002, -0003

  PDF--> I get file names Aug_ssn_GPunto_lug20140001, -0002, -0003

  The Red prefix is the name of the first scan to PDF, I did, which is repeated at any time.

  Is there a way to change this?

  Thx a lot

  Hello

  You can change, but it will keep up to your change as a prefix or you will have to appoint one by one afterwards. To change the prefix, please try your computer

  • Click the icon on the desktop printer,
  • Click on scan a Document or Photo.
  • Click on advanced (near bottom right).
  • Click the Destination tab,
  • Change file name,
  • Click Ok

  (The same for each type).

  Kind regards.

• HP C7280 Scan to PDF on Mac

  IHAVE used the C7280 with a PC and have now evolved into a Mac. I have installed the HP Photosmart from the 9.1 version software but I can't figure how to make a pdf.

  Help!

  Thanks - that's solvew it!

• Photosmart 5510 Scan to PDF

  I just bought a photosmart 5510 and installed on a Mac OS 10.7

  It is to replace an old but reliable scanner HP scanjet 2400 which I was using connected to a windows machine. on the scanjet I could scan multiple pages to a PDF, but I don't know how to do this on the 5510.

  Thanks in advance

  Ok

  Run the installation again,

  Be sure to select check the option software recommended during installation.

  (In the 3rd or 4th form).

  You will find the Hewlett-Packard with the HP Scan3 folder inside it.

• While a single 3110 - scan to PDF

  I installed the All in One 3110 drivers and software in the new computer with Windows 7 automatically. But when I want to scan a document, it does not show the type of pdf file.

  How can I include scan pdf file as in the old computer, type 3110 HP used to give this choice?

  Hello fsung99

  Is your printer Photosmart 3110 scanning to PDF option is included with the full feature software that the Photosmart 3110 does not for Windows 7. You can get a free scan to PDF software using your search engine favorite.

  When scanning using Windows Image Acquisition (WIA), you have the following options:

  The following scanning options and file types are available when you are scanning with WIA drivers.

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• Photosmart C7280 AIO: Installation of an earlier version of the AIO software to solve the problems of scanning?

  I had nothing but troubles attempt at analysis of the Solution Center with my Windows 7 upgraded to professional to Home Premium.  I've seen a lot of posts on sysems that will print but not scan.  None of the solutions proposed on these threads has worked for me. I ran print and Scan of the doctor.  I've uninstalled and reinstalled the latest version (PS_AIO_02_Net_Full_Win_WW_130_140).  I run L4 uninstall and reinstalled the latest version.  I scanned my computer against viruses and malware.  I ran "SCF/scannow".  I have run memory scans.  I did "unplug everything" and reset.  I ran the product as an administrator.  I tried to run several compatibility modes.  This past for more than a week, and I was not inactive.  You name it I did it.  I don't want to turn on my computer to its configuration 2 years up to what I've exhausted all other possibilities.

  Now for the real question (for those who have had this or similar questions)... Has anyone everything uninstalled and tried to install an older version (which can be improved later)?  My old version on my OLD XP laptop works fine.  I still have the older 100_228_PS_AIO_02_Full_Net_enu_NB verson of the installer.  If it will install (and work) on the WIN7PRO, I'd be happy.  Darn, I just try that anyway, but I would feel more comfortable if I knew that someone had tried (win or lose).

  All suggestions are solicited.

  I have no recourse to the use of the old S/w.  I kept search some old discussions in this forum and finally a couple linked together which resulted in success (after several attempts at all the great suggestions that I had read in the forum).  BUT. one stands out because it spoke of my exact problem. Scanning from HP with my Photosmart C7280 solutions Center after the upgrade to Windows 7 Edition Home Premium to Windows 7 Professional.  The solution has been presented in a thread of 2009:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/after-Windows-7-upgrade-printer-is-installed-but-nothing/m-p/174825#M8248

  I landed on this all to coincidentally linking 2010 regarding a similar issue but diferent (similar = upgrade, different = print):

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/networked-C6280-and-Windows-7-64-bit/TD-p/217282

  I am so happy that the old wires still exist in this forum.  The solutions are not always the most obvious, especially for those of us who have been around computers for almost 40 years and have some predisposed notions.

  Thank you to everyone.  Now to save this thing before something else goes south.

• Photosmart C7280 previous image scan will not delete

  I scanned (PDFs in mail) the other day.  When I try a new scan (also pdf to mail), the old image of documents now include in scanning new documents.  I tried to turn off and restart, using vs feeder, nothing seems to disengage the already scanned images.  All updates are underway.  Suggestions?

  Thank you!

  Hey bgroovn,

  How the C7280 is connected to the PC?

  You mention that you restarted the printer, but you've restarted the PC (and restarted the router of network if Ethernet or wireless)?

  Have you run printing HP and doctor Scan?  It is an automated troubleshooting tool that fixes a lot of scanning and printing related issues.

• Photosmart C7280 will not scan

  I am running Windows 7, I just replaced a photosmart c6180 with a Photosmart C7280.  The C7280 will not scan.

  When I use the Solution center, the analysis shows a black with no document screen as someone forgot to turn on the light.

  I tried printing and scanning utility, he said I was missing a update on the Solutions Center.  I loaded it and I still have

  have the same problem.  The printing and scanning utility now works without error throughout.  Until I loaded the C7280

  software I removed all software C6180.  I did some research and found that I should use a scrubber to get rid of all the

  the previous software.   I found a list of what it takes in hp support forum 1380995 and followed to the letter.

  I still have the problem. I'm on a 32-bit computer.

  Thanks for any help.

  I guess that's it.  I want to thank you for all your help in this matter and stick with me.

  Thanks again.

• How to scan to PDF? I have the HP Photosmart c4680 printer and m7-1015dx Pavilion computer.

  How to scan in pdf format. I have printer hp photosmart C4680 & pc hp Pavilion m7-1015dx Entertainment, using the Windows 7 operating system.

  The computer only allows me to scan all the documents in for example jpeg photo format. My old computer has a program called HP solution center this permit scan me to PDF.  The new configuration of hp can only scan to the size of the photo. How can I fix it, so can scan documents to pdf format?

  Hi, you probably need "Full Feature software and Derivers" at the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=au&dlc=en&sw_lang=&product=3739150#N193 if still does not work. Please try to download and install for free a product called PDF24. You can open this program and import from a scanner, you can also use this program to edit the scanned or as pdf documents. Here is the link to download: http://en.pdf24.org/pdf-editor.jsp best regards.

• Restoration of shortcut "scan to pdf" HP Photosmart

  On my HP Photosmart I deleted by mistake, the "scan to pdf" as a shortcut to scan. How can I get to get to the software appears on mmy Office for reason, that for some reason, and where I have deleted the shortcut option.

  Start all programs of Hewlett-Packard [your printer model] Scan to PDF.  Send right click shortcut on the desktop

• How to scan color PDF with Photosmart 6520

  How to scan color PDF with the Photosmart 6520? They only appear on my Mac in black and white and I don't see any option to specify the color on the device.

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• Windows 8 drivers/software for the Photosmart C7280 printer/Scanner

  Hello

  I have a HP Photosmart C7280 printer/scanner. I have recently installed Windows 8 Preview Release and discovered that the software I have installed Windows 7 doesn't seem to work as well. On the Setup, the only butotn displayed is "Exit" - that's why I can not install the software and drivers.

  Are there solutions available for Windows 8 again (even if its only beta software - I'm happy to give it a go)?

  Thank you

  Jamie

  Hi Travis_C,

  Thank you very much for the reply.

  What happens to me with respect to scan using Windows' built in the analysis Assistant which is OK but that only gives me the option to save as a bitmap, .jpeg, .gif, .png or .tiff.

  Software of HP that I used in Windows 7 accepted save me the scanning to PDF which is what I want in this case. Is it possible to get this software to run in Windows 8? In addition, will you be brining a version of Windows 8 of this software?

  Thank you

  Jamie