Photosmart c7280. wireless network.
Photosmart C7280 has been active in a wireless network. then the injury signal. Diallo said that radio is on. Radio has failed the test of work. Is there a way to reset the radio. or to solve this problem, if the radio is shot? If connect us printer directly into the router instead of the rest of the network wireless access to the printer in this way?
Thank you.
Connect the printer with Ethernet is a great alternative and any computer can print, no matter how they are connected to your home network.
If you want to try to reset your printer to retrieve the wireless radio: turn the printer off, hold it # and 6 keys while and shortly after having again.
Tags: HP Printers
Similar Questions
-
Plug a Photosmart C4795 wireless network
When I try to connect my printer via wireless network, she prays for SSID and WEP key. I use a Verizon Wireless UM175 USB modem. I can't find the info SSID and WEP. I installed this on a laptop HP with Windows Vista. Can you help me please?
PrintDoc wrote:
Hmm, nobody can really help you with this exactly, but we can help you help you
Your SSID is the name of your broadcast wireless network (when you look at a list of wireless signals on your computer and say 'it's me' - that's all).
Your WEP (or WPA better alternative) is the password used by your wireless system. You will need to know what type (WEP or WPA) and the actual password. Did you write somewhere? A good tip is to write both on paper and note your router to strip.
If you're still stuck, you can download this tool and it will help you get the info you need, however, is a little "cranky".
Message edited by PrintDoc on 07/10/2009 07:18 -
How to add the printer in Photosmart 7525 wireless network to my laptop?
I have already added my new printer Photosmart 7525 to my home network. It is installed via USB with the complete HP 7525 software (downloaded from HP) on my HP desktop computer that is running Windows 7 Home Premium 64 bit and I shared the printer on the desktop. I want to access the printer even my laptop which is connected to my network via a router wireless (N). The laptop is running Windows 7 Home premium 32 bit. On the laptop under Windows, when I click to "add a network printer", it "sees" the printer 7525 shared desktop, and she also 'sees' 2 iterations of the 7525 which are connected to the network (I used the control panel of the printer to add the 7525 to wireless connection before never hang on the printer to any PC). Under Windows, when I click on 'Add' my printer to the laptop, it pops up a window asking me to choose my printer model in the list of printers HP listed in the menu drop-down (it is looking to add the printer driver, I think). My Photosmart 7525 is not in the list. Photosmart 7500 series of printers is not also listed - even when I refresh the list of printers Windows drop-down list by using the Windows Update option. So, what should I do - download and install the Photosmart full 7525 software and then add the 7525?
Hi cwr64,
It is easier, more likely to work, to install the software of feature complete on each computer you want to use this printer. I think you can use the printer with the USB cable connected to a printer and the Wi - Fi connection for other systems on your network home.
The exception: CE devices don't use FFS - instead, you can use the mobile application for printing.
Examples:
How to print with an iPad, iPhone or iPod touch
Click on the star of congratulations !
It's a nice way of saying 'Thank you' for help.
Although I strive to reflect best practices of HP, I do not work for HP.
Reference:
E-all-in-one printer drivers HP Photosmart 7525
Click on the star of congratulations !
It's a nice way of saying 'Thank you' for help.
Although I strive to reflect best practices of HP, I do not work for HP.
-
HP photosmart c7280 wireless printer has been working and connected to the router. Stop printing. The test report under collar "Radio on", according to Radio wireless working' fail. Is - fixable? The printer is only used wireless and not as part of a networked system.
I thank very you much for your help and confirmation. I certainly could have been more specific about the problem and what I did. It was my first time, and you were very understanding.
Thank you once again
Sandy
-
Photosmart C7280 stopped wireless
My Photosmart C7280 has recently stopped working wireless. I have run the tool diagnoses the printer and was able to print when connected by USB, but whenever I try to print wireless, nothing is going on - I have tried two tools (HP Solution Center AND HP Network Diagnostic Tools) say that it is not connected.
When I 'ping' (I know that the IP address) of the screen "cmd" on Windows it is said that he can find it. When I look at my manager wireless BT Hub screen we can see it, but every time I try to print it expires always say that it is impossible to find the printer or it is not connected.
When I run the HP Network printer setup report, he said that everything is fine, then why can't find it-someone ' a please help! I spent most of the holiday, try to address this issue!
I have a Sony Windows XP (SP3) laptop, my wife has a Dell laptop with the same configuration, and none of them are wireless printing. My thoughts are that maybe the wireless card is spent in the printer? Does / can happen, and what is the answer?
Thank you.
Andy
Print a network Test Wireless at the front of the printer. It will be automatic card test wireless in the printer.
Then, we will set an IP address of the printer:
-Print a the front of the printer Network Setup Page. Note the IP address of the printer.
-Enter the IP address in a browser to reveal the internal settings of the printer.
-Choose the network tab, then wireless along the left side, then on the IPv4 tab.
-On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
-Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
-Let the gateway and DNS white. Click on ' applyNow, stop the router and printer, start the router, wait, and then start printing.
After that, you will need to remove the printer in Control Panel > printers and redo "add a printer" using the new IP address.
-
Photosmart C7280 all-in-One Wireless does not
My wireless printing worked great with my Photosmart C7280 at least a year or more and now recently the wireless side no longer works. My Apple (iPad and Macbook) devices has ceased to recognize my printer. Even when I tried to add via IP address, it should not.
My printer works fine when hard cable through my PC and Macbook via USB.
I tried to reset the settings of my network to restore default network printer and adding in my SSID and password. It shows that it is connected. But when I run a Test Page wireless network of in the settings of the printer, it shows everything going on and the signal strength is excellent. However, the final diagnosis in the summary says 'No' to "other networks detected matching your network name (SSID)" so I wonder if my printer actually properly connect my network? Since I have other wireless devices connected to the same SSID.
I turned other devices and the printer off, and then to restart. I turned and turn on the radio wireless settings of the printer.
Another thing I want to mention is that before I deleted the printers in my Apple devices, they still show my Photosmart 7200 series, but said they were inactive.
Also when I was able to enter my Verizon FIOS Broadband Router management software via my browser, it showed all my wireless devices, but it also showed my Photosmart as being inactive wireless, where other devices that were on at the time were connected.
I wonder if it may have been a recent update from Apple that may have caused this problem? However the Verizon Fios also showed the printer as being inactive, so I think not?
I have worked on this issue for the days and spent a ton of time so far, any suggestions to solve this problem would be greatly appreciated.
I'm about to intermediate level to understand the technical aspects. So please clarify responses to resolution steps very simply in your response.
Honestly, the routers ISP-issued are very problematic. Restart the Westell pulling on her momentarily just power cable before attempting to connect the printer.
-
C7280 all in the a photosmart printer wireless problem
Photosmart c7280 All in One
Windows 7 64 b
Unable to connect to the modem
no change
This photosmart c7280 all-in-one is no spring chicken, and there were no problems so far. It is connected to 2 laptops via a Qwest wireless modem. After that be able to connect to the printer for a week or two the ability to access the printer has disappeared... printer shows offline. To resolve this problem, I had to redo the SSID and WEP information and it would be upward. Today when this 'fix' again once he could not find the modem even if I am connected to my office at the top of the page and online. I had unplugged the modem and brought up in power go online without a problem, I so I stop the 7280 and restarted, is returned to Setup Wizard wireless, put in the news and hit OK... it has started the search for the modem then hooked! Unable to do anything, power button did not work, had to pull the plug to get it to turn off. Back on and everything but the wireless worked, did this x 4 with the same result. Is there a separate card to control the wireless function? It is replaceable and it sounds like the likely cause of the problem?
Thank you, Bob
Looks like the wireless card has failed. Print a network Test Wireless in the network menu on the front of the printer.
If she does not, reset the printer by turning it off, keeping the # 6 keys while a few seconds after turning it on.
If the radio is toast, it can be practically replaced.
-
HP Photosmart C4780 connects not (wireless) on Mac or wireless network
Sorry for the long post, but please someone help me!
I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:
"Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »
I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.
Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.
Network Test report:
"Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »
How to change the network name of the printer to match?
Summary of diagnosis:
Wireless on: PASS
Wireless work: PASS
Find the network name (SSID): FAILURE
Security: PASS
The printer settings compatible with the wireless router settings: does not work
No filtering: does not work
Related: Does not work
Signal strength: does not work
Other networks detected matching your network name (SSID): does not work
Detected wireless networks: 1
Downlink Count: 0
Channel: Does not work
Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?
Summary of configuration:
Communication mode: Infrastructure
Authentication type: open
Encryption: no
______________________________________________________________
Network Setup page:
General information:
Network status: offline
Type of connection: no
URL to Web server integrated: http://0.0.0.0
Firmware Version/Hostname/serial number were all given
Admin password: not set
802.11 wireless
Hardware address (MAC): data
Status: disconnected
Port 9100
Status: enabled
mDNS
Status: enabled
Service name: Photosmart C4700 Series [6 last digits of my MAC address]
SLP
Status: enabled
Microsoft Web Services
WS discovery
Status: enabled
WS Print
Status: enabled
PC connected (s)
Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)
Number of 802.11 networks discovered: 1
(my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))
Help!
Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967
-
Photosmart HP 7520: All wireless network devices will lose connectivity after printing
Dear all, I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer. * Summary Wireless network unusable after sending one print to HP printer No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24) * Details Turn HP printer on. ( wireless direct is off - never turned on ) HP printer connects to working wireless network. Other devices ( phone/computers ) already connected and working. From any device, send a document to the printer. Printer prints document successfully. Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ). * Reproducibility Always * Work around Disconnect all devices from the network. Power off printer. Reboot Internet router. * Attempted solutions Removed wireless configuration. Factory reset. Added wireless configuration back. Powered on and off printer. * Printing tested with Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2 * Not tested Ethernet cable directly connected to router. * Internet Router Netgear CG 3700
Number of brand and model of the router?
These settings are to set up your printer wireless (or wired):
- Stay connected to your router
- Trouble printer status 'offline '.
- Wake mode 'sleep'
- All wireless devices stay better connected
While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP. After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.
- Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here. Video here explains the problem and how to solve the problem. <-->--> So watch this!
- Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
- If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
- Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).
Additional measures to take if you continue to have the problem (if they are posted)...
-
my wireless radio does not work on my hp photosmart c7280
My newtowrk is running. I recently had to erase hard drive and reload. My wireless hp photosmart C7280 all-in-one does not work.
My operating system is Windows Vista Home Premium 64-bit. HP Pavilion Desktop c6700y.
The radio is really dead?
Reset the printer. Turn off the power, then hold # and 6 keys while and a few seconds after turning it on.
-
HP photosmart 5520: how to change wireless network
We change the network wireless to a new device
How can I change the HP Photosmart 5520 for the new wireless device?
How to configure laptop computers to print to the printer on the new wireless network?
annax wrote:
I looked through the user's guides, but could not find how to change printer to join another network wireless
Can you please provide the steps
I downloaded the manual and found your informtion on page 32 user's guide.
It's your support on the edit page and the connection of your printer.
-
Photosmart C4599 connects to the wireless network
System details: Windows 7 64 bit, HP Photosmart C4599 Limited Edition. Wireless network (Netgear router) with visible SSID and MAC filter.
As the title suggests: my wireless printer is not connecting to my wireless network more. The reason that it is 'more' is because he used to work. But my wireless router has started to lose the internet connection - and I read somewhere that it might work to change the broadcast channel of the router (instead of channel 11 to 13). And it helped.
But since then, the printer was not able to connect. I tried it back - and interruption of the internet connection but the printer worked (a little).I tell myself that I have to reset the wireless printers Setup, I don't know how to do.
Ok. I think that the issue would be with the channel. It might be too high a frequency for the printer to communicate properly. You can have a heavy traffic on any channel, it depends on what is around you. I recommend trying channel 1 or 6. You should be able to download a parser for your smart phone wifi see what are the channels have less useage.
-
Photosmart C4380 - not found wireless network
My photosmart C4383 than worked fine with wifi since 2007, but yesterday he lost his IP address.
I ran hp-setup, with connected USB and the network connection has been restored, but he disappeared after
the first attempt to print. After that, each running hp - Setup fails with the message
'No wireless networks found', although my wifi, provided by a Netgear router, works very well, as I have
4 devices connected, and they immediately find the wifi on reboot.
I don't see any explanation, except that the problem is with the photosmart himself.
Am I wrong?
Hey @pfrenkiel ,
Thanks for joining us on the HP Forums today, hope you enjoy your time with us!
I understand that you encounter connectivity problems on your Photosmart C4383. You are able to make it all work, but you are not able to get on the wireless network more.
With the printer being as old as it is, it could very well lose functionality in its internal modem. It is not a replaceable part unfortunately. This is probably what happened because you are not able to see more networks of the printer.
You can either continue to use the printer via the USB port or upgrade to a new printer.
I wish I could help you on the Forums, but I simply can't. Best of luck and hope this isn't too much inconvenience.
-
HP Photosmart 7520 unable to find the wireless network
Printer: HP Photosmart 7520 e - ALL - IN - ONE SERIES
Router: NETGEAR router WNDR4000
Hi all
After receiving our new HP all in one printer, we have found our network wireless networks list wireless during the printer set up. We are able to receive the networks of our neighbors, but not our network.
We tried:
- Using the WPS function on the router and the printer
- Establishment of an open on our router wireless network
- Connect to our wireless router using the setting on our laptop when the option during the installation of a PC.
Any help on this subjest would be appreciated.
Best regards, Nick van der Lee
Hello
I found the problem that was the printer not to see the SSID of the router.
The wireless channel was on channel 12 for the frequency of 2.4 GHz. While I was looking around I found this Support Page for Nintedo. Point 6 is a mention about these channels with respect to the same problems I was experiencing with the printer.
By changing our channel to channel number 3 number, we could see the wireless network.
It's a bit weird because I thought that the printer has a full specification b/g/n but apparently not?
In any case thank you for your support.
-
HP PhotoSmart restricted 6525 in the wireless network connection
Hello
I need to connect my HP PhotoSmart 6525 to a wireless network in my college dorm room. IT supports the University has published the requirements for the connection to the restricted network and attention that many printers cannot. I looked on the HP website to see if my printer supports the protocols required, but information HP provides on the website is not detailed enough to tell. I hope that someone on the forum can help me.
Here are the requirements of universities to connect to the restricted network:
----------------------------
A device with a Wi - Fi adapter capable of 802.11 g, 802. 11A or 802.11n
Note: 802. 11 b-only devices are not supported
To enable DHCP (Dynamic Host Configuration Protocol) to obtain IP configuration information
- Operating system and drivers that support:
- authentication of 802. 1 x (also commonly referred to as WPA-Enterprise or WPA2-Enterprise)
- WPA2-AES (preferred) or WPA-TKIP
- EAP-PEAPv0 (external auth) / MSCHAPv2 (internal auth) or EAP-TTLS (external auth) / MSCHAPv2 (inner auth)
All connections to the campus network, no matter what either wired or wireless, must also bear the following (which are installed and enabled by default on modern operating systems):
- IPv4 (Internet Protocol version 4)
- TCP (Transmission Control Protocol)
- UDP (User Datagram Protocol)
- ICMP (Internet Control Message Protocol)
----------------------------
Does anyone know if the HP PhotoSmart 6525 meets these requirements? For example, he says "PEAPv0(outer auth)/EAP-MSCHAPv2 (internal auth)" or "EAP-TTLS(outer auth)/MSCHAPv2(inner auth)?
Thanks in advance,
Paul2
"I could check on the web site of www.wi-fi.org HP Photosmart 6520 series is approved for"WPA-Personal"and"WPA2-Personal"and _not_ certified for" ' WPA-Enterprise and WPA2-Enterprise. The Enterprise versions require the device to authenticate with a username and password, while the personal versions are not. I also talked to the school, IT supports and independently, they have said that the problem with the help of authentication printers more is that you can not provide a user name and password. Given that I could check with two sources independently, according to me, the definitive answer is that I can't use the printer with wireless network from business school.
Maybe you are looking for
-
UPDATE FAILED TO 6.4.0
Dear Sirs... I have a READY NAS 102 and im trying to update to 6.2.5 6.4.0 When the system crashes and completely restart it says the same thing: upgrade to 6.4.0 Could you help me on this? Thank you
-
Ive tried all the different ways to raise with him, and it is always the same... this card reader perfectly worked fine last night. I don't know what I can do, get very frustrated.
-
I have a problem with my RE4000W. I have it configured with a static IP address.It s available through this IP address and can ping websites via diagnostic tests. But no device attached if WiFi has an Internet connection.I have can´t out. But I can r
-
I NEED TO BECOME AN ADMINISTRATOR ON MY COMPUTER. MY HUSBAND IS THE SOLE DIRECTOR. AND IT ME AS A STANDARD USER AND PUT SAFETY ON ME. I CAN'T DO ANYTHING IN THE COMPUTER WITHOUT PASSWORD WHICH IT WONT GIVE.IS THERE A WAY TO SUBSTITUTE ME FOR HIM AND
-
Windows Movie Maker version 6.0.6002.18005
I use Vista Home Premium and I would like to know how to go about uninstalling this program. Can you please help.Thank youDavid