Photosmart C8180: Scanner not recognized

Similar Questions

• Why my Photosmart C8180 can not see my Virgin super hub, when he sees all the other distant routers?

  I'm on Mac OS x 10.7.2. I have a blank superhub. My Photosmart C8180 will not detect the hub using the wireless Assistant, but sees other networks in the region. I tried setting that allows a fixed IP address in the range of the router. Still nothing.

  Pilots etc have been updated for Lion ffollowing as instructions on the HP site but still no luck. Can anyone help?

  Diagnostic summary reports: -.

  Radio on: PASS

  The radio work: PASS

  Cable not connected: PASS

  Network name (SSID), found; IN CASE OF FAILURE

  The six remaining diagnostic report does NOT RUN

  Record of the summary reports: -.

  Network name: NOT APPLICABLE

  Hardware address (MAC): {identified but not included here}

  IP address: NOT APPLICABLE

  Configuration source: NOT APPLICABLE

  Communication mode: INFRASTRUCTURE

  Authentication type: NOT APPLICABLE

  Encryption: NOT APPLICABLE

  The blue light above 802.11 g on the right face is on.

  The printer works properly when connected by USB, but not with the radio.

  Kind regards

  Michael

  Security mode is set to [AES] WPA2-PSK and SSID Broadcast is checked.

  ID of 5 GHz Wireless band setting

  I tried to change to auto WPA, but it has no effect. Still does not see my router.

  Printer is set up for sharing in the Mac system preferences

  Just found my own solution.

  Changed Wireless 2.4 GHz band and has appeared.

  Thank you for taking the time to answer anyway. One to save for the future, if someone else reports similar problems with blank superhub.

  Kind regards

  Mike

• HP Photosmart C7280 Scanner not detected since Mac OS installed Sierra

  Hello

  I installed Mac OS sierra

  Since then, my HP Photosmart C7280 scanner is not longer detected:

  • In the system preferences tab scan
  • Image transfer can not find any device

  I reinstalled the device

  Print shops

  Scanner is connected to the router (Hello) by Eternet

  Scanner still works when you use a Windows 10

  MacBook Pro (retina, 13 inches, end 2012)

  macOS Sierra Version 10.12 (French)

  Here is a link to the HP support pages, please read carefully including the FAQ, there is a link to the HP scanning utility.

  Drivers for HP printers and scanners are downloaded on the App Store, have checked whether there are updates for your HP product.

  What OS did you go to?

• HP Photosmart C8180 will not light

  Hello

  I have a HP PhotoSmart C8180.  I recently moved and the printer was working fine until I moved it, but once it was plugged in after the move, the printer lights not at all.  The move was only 1/2 mile so he simply sat nicely on a car for the car seat and has not been disturbed around.  I tried a second original HP power and it made no difference.

  The power light comes on and the system powers the LightScribe disc but nothing else.  Making sure power is disconnected for hours even before plugging it back in does not give any different results.  I tried to press a variety of buttons while it turn to try to force a system reset any without change as well.

  Any suggestions?

  Thank you!

  Keith

  Thank you.  I had no time to answer back previously, but in fact, this has been resolved.  I think that what ended up finding it was the small watch battery figure on the map system inside the printer, leaving all the drains of power that remained in the chips, then put the whole thing back together again.  After turning on it always came not for a few minutes and then roar back to life again.

  Thank you!

  Keith

• Officjet 7610: Scanner not recognized

  I just bought this printer and used the HP software to install on a wireless network. The printer is recognized and installed, but the scan option is not recognized.

  I deleted the drivers printer and reinstalled but no change.

  I applied the suggestions on the forum and still no scanner. Apple and HP printer list shows that noth printing and scanning is supported for the wireless.

  The same thing has happened now with our Officejet 7500 a

  Please can you advise.

  Hi @Norman_S

  Thanks for the reply.

  Yes, it looks like there is a network problem or a problem with the printer.

  When you reset the settings and reconfigured the wireless. That's happened?

  • You are connected the printer wireless?
  • You update the firmware?

  When you bypassed the router using HP direct, what happened?
  If the printer was able to connect wirelessly, there is a problem with the wireless network settings.

  Tips for successful network configurations:

  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • HP recommends a WPA and WPA2 encryption.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable the WPS.
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • What router do you have? Verify that the router has the latest firmware on the manufacturers website.
  • If you have a Mac OS X running 10.8 or earlier, click here to locate and download the update of the firmware.
  • If you have access to a computer running 8.1 Windows or an earlier version, click here to locate and download the update of the firmware.

  Please reply to this message with the results.

• Hp134 cartridge is really compatible with photosmart c3183? Not recognized.

  Hp134 cartridge is really compatible with photosmart c3183?

  https://h30042.www3.HP.com/SureSupply/CountryChangeSubmit.action?nav&nav#3

  Had an error with the new hp134 - copy color and cartridge blink = not recognized, full reset does not help.

  Contacts are clear.

  Black print cartridge is hp132 - seem to be recognized and it was working before the color cartridge error. But no printing is available even in black and no self test printing - when you press "Cancel" + "color copy" just "power we" blinks a few seconds.

  Hello

  134 ink cartridge is not compatible with your printer, HP Suresupply list as compatible either:

  

  The 132 black cartridge must be used with the Tricolor 136 only cartridge.

  You can also use the 131 black with the 135 color ink cartridges capacity.

  Any other combination won't work, as you can find below:

  http://h10060.www1.HP.com/pageyield/en-150/yields/PSAIOC3100_page.html?cCode=emea_middle_east

  Shlomi

• Scanner not recognized by Mac os10.9

  The scanner on my OfficeJet 7500 a is not recognized. I can't scan in the printer, or application preferences. I get the message "cannot open the session. However, I can scan Web page printers using webscan.

  And I can scan to a memory card printer, but the printer control panel does not recognize my computer. It print wireless, and it does not recognize my network to printing purposes.

  Y at - it anyway to get the software I need to get the scanner to run?

  I had this problem sporadically for two years and now the warranty has expired.

  Mac Mini (2012), 4 GB... OS10.9

  Hello

  Please check that the printers supported list and try the following fix:

  http://support.Apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  Kind regards.

• HP Deskjet 1510 all-in-One -: HP Deskjet 1510 all-in-One - scanner not recognized

  Establishing another laptop for my all-in-one HP Deskjet 1501. The printer works well, but I do not see the scanner information pop up. With my other laptop, he did. One reason why the scanner is not recognized? Thank you!

  Hello escada48,

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  However, you can see the printer on the desktop icon you. Click it to open the Printer Wizard , and then click the Scan Picture ready.

• Epson Perfection 1250 scanner not recognized under windows 8

  one moment the Windows 8 is up and runing.
  All except the Scanner Epson Perfection 1250.
  Old it is but where is the driver for windows 8.
  Epson has no support for this driver.

  The scanner is not recognized by window 8.
  Someone can help or do we need to buy a new one.

  Just for info. Scanner works Yes there are free external programs that can run on windows 8, but you have to pay to get rid of the watermark on each scan.

  But why the Microsoft cant recognize?

  I dropped the driver, I use VueScan. It will scan without the need for any driver.

  Work on my Epson 1650 Scanner.

• OfficeJet 7500: HP L7500 Scanner not recognized after last update Win 10

  I have this same problem on all my PC from the most recent Win 10 update 3 March 2016.  All the pc to connect to the printer via a wireless connection with the printer connected to the router using one if the router is NIC ports.  Just to be clear, I just downloaded the latest drivers that you show here for this printer.  If I use the drivers them or earlier, I can't the PARSER must be recognized.  I tried uninstalling and reinstalling the drivers more recent and even tried the original CD (which are Vista drivers).  All to nothing does not.  When I try to scan I get this msg on the screen: "the analysis cannot because another program or computer using the networked HP imaging device.  Try again later. "The error information extened is:"8 (0.18,-2147467259)"[whatever that means]!.

  I also tried physician Scan (latest version).  He concludes by saying: he can not solve the problem.  I did the food printer disonnect, etc. in full agreement with the instructions here.  The PRINTER works fine and it appears in the network installation.  It's the Scanner is not working.  And it worked until the most recent upgrade to win 10.

  I use Kaspersky Antivirus and it is ON and operational during the installation.  What can we do to get the scanner to work? integrated application of win 10 Scan Lele reports that it cannot find the scanner, so it's help.  Until this last Win 10 update, method also used to work.

  Hi @SoCalGuy,

  Glad to hear that you were able to find a way to solve the problem you!

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• Scanner not recognized

  FET scanner my printer Laserjet M1217nfw MFP, connected to an iMac/OS 10.11.3, has always worked well. Now, it is no longer recognized by the computer, even though I downloaded an updated driver.

  Hi @JVCosta,

  Welcome to the Forums of HP Support!

• scanner not recognized on Windows 10

  I just bought a new computer Windows 10 and added my Canon MP216n printing and updated software of the Web site

  Initially, everything worked and now the Canon Toolbox can not find scanner.  My computer windows 8 on the same WiFi considers it, and it works fine.  I don't know why it stopped working.  I removed the printer and reinstalled but the same result.

  Any suggestions?

  Hi ronwebber,

  Please check the model number of the Canon printer you have.

  Model number would be MF216n instead of MP216n imageCLASS?

• 2180 scanner not recognized on my imac 10.6.8

  even though I have the latest version of the HP software for my deskjet F 2180 he fails to see the scanner I'm using mac os 10.6.8

  clues?

  Hello

  As you mentioned that you are trying to open HP Device Manager, you do not use the correct software for 10.6.8 the device HP Manager is a part of the software 10.5...

  Do not forget to remove any software from HP following Uninstall HP under Applications > Hewlett-Packard (ru, uninstall several times if necessary) until the Hewlett-Packard folder no longer exists.

  Then download and install the correct software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-74802-1&cc=us&DLC=en&LC=en&OS=219&product=3177562&sw_lang=

  Finally, run software update so that drivers are perfectly up-to-date.

• Scanner not recognized on HP6500 E709

  Everything works fine on my 6500 - EXCEPT the scanner.  I'm not either of my computers to recognize.  I've uninstalled and reinstalled four times.  I unplugged the power for several minutes four times.  I checked and rechecked all cables.  The printer works fine, but the scanner is no longer usable.  Are there drivers, that I need to download or I need to find a cute way standing on my head? I'd love to be able to use any piece of equipment, instead of just the printer.

  Hi NellyBWill,

  Please try other USB ports, and I understand you to be able to print.

  I did some additional research and found this guide, which can be useful, "computer no. has detected" or a Message appears "connection error" during the scan.

  Hope that solves your problem and please let me know if you have additional problems!

• Photosmart 5515 is not recognized by the solution Center

  I installed an HP Photosmart 5515 printer on my HP computer.  I have a USB connection and am on a home network.  All computers can print correctly.  I can't get the center of HP solutions to recoginize the new printer and can not find the file msi, it needs.  Can you help me?

  Richard Saylor

  Hi charger123,

  The printer uses a newer version of the software, and your solution center of older printers will not see this printer. You should have an icon on your desktop like the one below which is the new center of solution for this version of the software. Let me know if you need assistance?