Photosmart HP 5510 - Vista

Similar Questions

• Photosmart HP 5510 invites to indicate the user name and password

  Hi people,

  I put a static IP address for the Photosmart HP 5510. When I navigate to , I get a pop-up dialog box requesting a user name and password.
  
  Does anyone know how to reset it on the Photosmart HP 5510?

  Thank you very much

  concerning

  Hey Joe,

  Try the following steps below.

  1. press the button on the control panel wireless

  2. tap on settings

  3. scroll down to the network by default, then press Ok

  You should be able to access the security settings in the built-in Web server now. Let me know what you find?

• photosmart HP 5510 vote B11a: noise and Auful printing problem

  Hello world

  I'm new here.

  I have a problem with my photosmart HP 5510 printer, when I try to print it makes a terrible noise and it does not print.

  I try update firmware, reset the printer, change the cartridge, remove all the piece of paper, but nothing.

  Could you help me please?

  Thank you

  Alessandro

  Hi @alessandro96

  I'd love to help you with the sound that you hear from the printer. I understand that you have already begun to solve the problem, but the noise remains. Please post back with the answers to the following questions;

  1. Is the printer on a flat surface?
  2. How long has noisy for the printer?
  3. Didn't help then the noise started? (ie. the paper, printer error message jam was fallen/hit, surge)
  4. There are flashing lights, or the error messages on the printer?
  5. When was the last time that the cartridges have been changed?
  6. If you are a Virgin copy, when you hear the noise?
  7. If you open the printer do you see broken parts?
  8. When opening upward where the cartridges go, they move freely?
  9. The cartridges are installed correctly? (ie. the cartridges are level and does not appear).
  10. Perform a hard reset. With the power on remove power cord from the back of the device, then from the wall outlet. Press and hold the power button for 30 seconds (drains the excess power of the printer). Plug the power supply into the wall outlet, then the printer.
  11. You still get the noise after that?

  I look forward to hear from you.

• 0x6100000bhaving a problem with my photosmart hp 5510 printer... Help

  problem with my photosmart hp 5510 0x6100000b please help the ink tray won't

  Hi, I know that this post has been done for a long time, but I just wanted to check if it is resolved? Do you have a warranty replacement printer?

  Thank you

  Ciara

• How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  The Tablet uses Android 3.2 and I downloaded HP ePrint home & Biz. Also had a pincode and used it.

  The Tablet still shows "printer not found." I have to do something on the printer?

  The printer is connected to a wireless router?  What router?  You've restarted the router?

  You have enabled Web Services from the front of the printer?

• Upgrading to windows 7 - does not recognize my printer Photosmart HP 5510

  my upgrade to windows 7, microsoft does not recognize my printer Photosmart HP 5510? I've tried everything

  Try to download the latest drivers from the HP website:

  http://www.support.HP.com/us-en/product/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905/drivers

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Need to download a driver for Photosmart HP 5510 printer.

  I BOUGHTAN PHOTOSMART HP 5510 PRINTER BUT NOT THE INSTALLATION OF A CD BECAUSE MY NETBOOK HAS NO OPTICAL DRIVE. WHAT I NEED IS A GOOD LINK TO DOWNLOAD THE DRIVER, PLEASE HELP. I HAVE TRIED SEVERAL SITES WITHOUT SUCCESS.

  Hello

  Start here http://www8.hp.com/us/en/support-drivers.html

  Don

• Wireless connection for Photosmart HP 5510

  I can not connect my Photosmart HP 5510 to the wireless network. It detects the wireless network, trying to connect, and then gives that the MAC address filtering message can be activated on your wireless router that can prevent your HP printer to connect. I don't know what to do, please help

  Hello

  Clarify your router brand and model can help provide you more specific advice.

  You can contact your router service provider and check the following settings:

  1. If Mac filtering is enabled in the configuration of the wireless router, make sure to add the printer Mac address as the authorized device.
     You can find the Mac address by printing a Network Setup Page.
     (Menu wireless > wireless settings > print Network Configuration Page [Ok])
  2. If your router's wireless security defined as Wep.
     Check it defined as Auto / Open authentication and authentication unrequited which is not supported by the latest HP printers.

  Kind regards

  Shlomi

• Photosmart HP 5510 B111a-printing of Ipads, host names and more!

  Hello

  I have 5 of these photosmart printers installation in various places around our school to allow printing of the iPad 2 that have been deployed to classrooms.

  The problem is it seems to be a way to identify the different printers on the network when printing of you ipads. When I click on print and then select a printer list shows "PHOTOSMART HP 5510 B111a [C95...

  The [C95 corresponds to the first three digits of the host name of the printer, the problem is that three out of five printers have the same first three digits and are all the same displayed as the example above and therefore gives no idea of what printer you select until you print.] Which is not very practical in a school of our size!

  I connected to the HP configuration page using the IP address and changed the host name, but it changed only on windows-based hardware.

  So my question is: is it possible to change the name of the printer to allow me to determine what printer I print from an iPad? If this isn't the case, any other solution would be great.

  Hello

  You can change the identification of the unit of the printer, following embedded Web server:

  1. Access SAP from your browser by using the IP address of the printer.
  2. Enter the network tab.
  3. Enter the network.
  4. Enter Hello.
  5. Change the Name of Service Hello , as required, the updated name will appear on any Apple device.
  6. Click apply to save the changes.

  Kind regards

  Shlomi

• Photosmart HP 5510 series: printer for wireless connection software installation CD

  Hi all

  I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/identify?q=HP+Photosmart+5510+series&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select your printer and win 10 OS before you download and install the FULL features software.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Photosmart HP 5510 - will not print using black ink

  I have problems with my HP Photosmart 5510 all-in-One printer, because it will not print in black. All cartridges are brand new and are genuine HP cartridges. I've never used anything other than HP cartridges, and I believe that I have would be considered a very light printer user.

  I use a HP Pavilion Desktop PC (Vista Home Premium) connected to the printer via a USB cable.

  I have to 'reset' the printer (power cable removed for 20 seconds), I cleaned the print heads and tried to re-alignment of the printer.

  I ran HP print and Scan diagnostics and do the message "Everything out OK with your product." I then print a test page which "fails", that there is no black ink in use. The diagnosis confirms that the ink levels are all OK and that my printer uses HP authentic and than Normal inks or better quality is selected.

  The printer is a little over a year old and as mentioned has had very light use.

  There is no error - every reason to believe that everything is OK.

  I wish I had a solution to this problem.

  As by chance my previous printer a HP Photosmart 3210 all-in-One failed in a similar way, although in this case, the black was fine, it was impossible to print colors correctly. Once the printer was just out of warranty.

  Curiously enough and fortunately like few others on the forum a few days after the installation of the new cartridge, it seems to work perfectly fine again.  any ideas as to why this happens?

• HP Photosmart 3310 under VISTA

  I recently move to a VISTA based PC. After installing the printer driver (VISTA version) on the site of it worked fine.

  However after restarting the PC the printer will more be found via SOLUTION CENTER. The printer is removed from the selection of the printer as well.

  This here a patch out to solve this problem?

  Thank you.

  Printer HP Photosmart C7280 all-in-onenot the HP Photosmart 3310 AiO Unit aims URL above.

• Pilot photosmart HP 5510

  Hi guys, really need your help. Ive have lost my cd for my HP photosmart 5510 series. Ive been on the HP website and tried to download for windows 8 32-bit, but when it downloads n I click it, it says: "this computer can't run this application. Ive got a netbook Acer Aspire to v5.
  PLEASEEE Help
  I appreciate that very much.

  Is that what you downloaded the driver package? http://ftp.HP.com/pub/softlib/software12/COL39102/MP-108875-3/PS5510_1315.exe

• Photosmart HP 5510: printer not connected to the network, although it

  Hi people,

  I am at my wits end with this and you are my only hope (what Star Wars quote).

  I have a HP Photosmart 5510, I've had around 2011.  I've always used it in the company of my iMac (OS X now on El Capitan). Over the last year or two, there was the strange number to which case when I open the HP utility on my iMac it says it is not able to connect to the printer and I should check that it is switched on (this is before you ask). This question seemed to resolve itself after a short while and there was no problem.

  However, I came to analyze some elements of the other day, and this same old issue again raised his head. I put my paper on the scanner and press the option scan only for the printer to tell me that there is no connected computer. Weird, I thought I had printed only some points the day before. I went to my iMac and open the HP utility to see my former favorite message that the printer was not plugged in blah blah.

  I went on HP website to see if there were new pilots required, which it was not (the last was for OSX Yosemitie!).

  I decided to try and start fees and remove the printer and re - add new. I deleted the printer, downloaded the latest HP deriver (just in case) and that's where everything went wrong.

  Software downloads, all right, it starts going through the installation process, end, then he gets to the selection of the device, issue. It evokes three devices that are my one and only printer (Strange I thought). Two with the "connection type" listed as Hello and the other with the connection type is listed as IP. I tried selecting each of these only for each of them to come back with the following error message:

  "YEAR error occurred while the communications device." Please make sure that the device is ready and try again." Well, if they hear by loan, circuit implementation, its connected to my network then YES ITS BLOODY LOAN! So I get no more on the process by the printer and HP Utility installation is nothing else than a large black plastic paper weight. I tried to reconnect my printer to my network wifi several times and everything is fine, its connected and there is no problems according to the page of "wireless network test results" print.

  What the hell is happening? Any ideas? Please save me before I throw this thing by the highest window that I can find.

  I'm not a computer expert and I'm certainly not a network specialist. All the advice is appreciated greatly and fortunately.

  Hey @Mvdarbs,

  Welcome to the Forum from HP Support. We're here for another help to get the most out of our products.

  Thank you for your message. I see that you experience the Mac-to-printer communication problems when you use the HP Photosmart e-All-in-one 5510 printer. All this happens despite your apparent WiFi connection. While it is no doubt frustrating to live when all you want to do is print, there are solutions that you can try and I hope that they will restore the regular feature.

  I recommend you try the following steps:

  (1) we will start over with the installation of your network printer. From the control panel press the wireless icon, and then select "Restore network Defaults."

  2) façade, run the "Wireless Setup Assistant." Reconnect to your home network and then make a note of the IP address.

  3) visit the printer embedded web server (EWS): this is done by entering the IP address of the printer in the address bar of the web browser and navigating to this address. If you have a security alert (as this page is not encrypted), click on to "Go forward anyway." If the page loads correctly, we can be certain that the network connection is real. While you're there, make a note of any error messages or status alerts (if you see it, it's all good) and don't forget to advise me on what you see.

  4) remove the printer from your Mac. If you are not sure how, refer to the

  guide for advice.

  one) (optional)-set a static IP address for your printer. Refer to this thread of @PrintDoc here: http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/changing-IP-address-for-wireless-printer/td-p/445087 for instructions on how to do it.

  5) reinstall your printer: click here and install the driver that you are prompted.

  Please let me know the result of your troubleshooting by responding to this post. Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  See you soon,.