Photosmart HP 6520: Locate a photo scanned on my computer

Similar Questions

• Device that my for hp photosmart printer b110 series will not scan into my computer it comes up with error scan!

  p photosmart HP b110 series printer will not scan anything on my computer.  The message - try the scan of the computer or documentation - memory to come to the top.  I can't find anything useful in the documentation and I can't find a way to scan the computer.  It was perfectly scanning up to about a week ago.

  Hello

  • What were the changes made before the issue started?
  • What version of Windows operating system do you use?

  You can view these methods:

  Method 1:

  I suggest you try to analyze the file from the following location:
  1. navigate to the folder of C:\program HP imaging\bin location
  2 Locate and double click on hpqsciapp.exe to activate the scanning application.

  Method 2:
  If the steps above fail, I suggest to uninstall and reinstall the drivers from the HP site and see if that helps.
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3944627&LC=en&cc=us&DLC=en&lang=en&cc=us

  To download compatible drivers from the printer manufacturer's website, first see which version of Windows you are using, and then search for compatible drivers.
  1. open system information by clicking the Start button, all programs, Accessories, click System Toolsand then clicking on System Information.
  2. click System summaryand check the name of the operating system and the Type of system to see which version of Windows you are running.
  3. go to the printer manufacturer's website and search for a compatible with your version of Windows printer driver.
  4. follow the instructions on the site to download and install the driver.
  Additional information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Note: These links means on Windows 7.

  See also:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-D110-scan-error/TD-p/370037

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/C6380-scan-error-quot-try-scanning-from-computer-refer-to/TD-p/55905

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-C4780-can-t-scan/TD-p/332577

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/C5580-scan-problems-how-do-I-scan/TD-p/90965

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• Photosmart HP 5520. Can not scan to my computer

  Photosmart HP 5520. I can print from my computer very well, but cannot scan from the printer TO my computer. Message is "connection error". This happens sometimes, but usually I can fix in any turn off, unplug and start again. Today, nothing works. This is getting tiresome. Printing works fine.  BTW, I do not control the router & it can just turn on and off. I'm not technologically savvy; I just want the thing to work.

  Hello

  The scan of the computer is disabled by default (I don't know why guys/girls software desinged like that). On my machine, driver for Windows 8 is much better (even same exe file). Turn it on by following the steps below (Please note: for Windows machines)

  Double-click the icon of the printer on the desktop,

  Click on manage the Scan of the computer.

  Click Activate

  You can check the last four too.

  Kind regards.

• How to move photos scanned to my computer folder?

  Acrobat Reader

  See How to move pictures scanned to my computer?

• Photosmart HP 6520: I can't scan plus

  It works fine but now I can not suddenly scanner and the "general failure" message appears.  I go through the computer using the "HP Scan and capture.  I tried to unplug etc, but nothing helps.

  Hi @JJPH,

  Thank you for visiting the Forums from the HP Support! I see that you get an error message 'the General scanner failure' on your HP Photosmart 6520. You have tried a reset and use the application to scan and Capture without success.

  You are able to make a copy? What happens if you make a copy, this same error message pop up?

  Please go ahead and launch HP print and Scan Doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  What is the PSDR?

  I'll watch for your reply.

  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• How can I configure my photosmart hp 6520 series be0830 scan in color

  When I scan with my hp photosmart series 6520 be0830 scan it in black and white. How can I put it to scan color also.

  Thank you

  Hi wallycracker,

  The following steps may resolve this problem.  The setting can be changed by the software.  For more information on this product, you can always visit the following link.  Click here

  1. Open Printer Wizard (the printer on the desktop icon)

  2. under analysis, click on scan a document or photo

  3. when the scan dialog box opens, choose the color from the drop-down list output type (see image below)

  4. change the other settings as you want, and then click scan

  

  I hope this helps!

• Photosmart HP 6520 all-in-one: Photosmart HP 6520 Scan to computer function doesn't work is not after the driver download

  After that our latest operating system updated, our HP Photosmart 6520 had scanning problems.  Usually a reboot or as part of the scan on the HP computer would work.  Today, I downloaded the latest driver in the hope that could solve the problem.  Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility.  The print feature works very well.   This message I see in the HP utility:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.

  What can I do to get my scanner up and running again?  Thank you very much for your help!

  Hi @kjnowicki

  I want to help you with your scanning device.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Photosmart HP 6520: HP 6520 will not scan

  6520 used to work without problem on the old pc w/windows 7. I have a new Toshiba satellite w/AMD 8. Prints fine but will not computer scan. Message on printer said computer unresponsive and check the usb connection. I rebooted driver did not help.

  Hi @johnharry,

  Welcome to the Forums of HP Support! I see that you are not able to use the computer scan with your HP Photosmart on your new computer Windows 8.1. I would like you to do a hard reset on the PS 6520:

  1. disconnect all cables and cards of memory in the printer. Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.

  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup because they can cause the printer to lose over time basic functionality).

  5. connect the power cord to the back of the printer.

  6. the printer should automatically power back upward. If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  Now, continue here: a "connection error" or "No. computer Found" Error message for HP Deskjet Ink Advantage 6520 e-all-in-one and HP Photosmart e-all-in-one 6520, Printer series

  Once on the page, select the Windows 8 article and complete all THE steps listed, make sure that the Scan of the computer is turned on.

  I hope hear from you soon, I would now like the result.

  Thank you

• Photosmart 6520: Set the default scan to PDF format

  Is it possible to set the default Analyzer for PDFs instead of jpg? My old printer allowed me to set via the menu, but I can't find a menu option, no matter where I looked.

  Hello

  You see settings options? The Options allow to choose the picture or Document. Scan of the computer will give you MORE options and you can choose default.

  Kind regards.

• Cannot scan for Mac. Photosmart HP 6520

  The only thing I can't do with this printer is to scan documents on my Mac. USB connection and the wireless system works well. I can scan and send documents by mail to myself. Everything else works fine. Help, please. wfm1936

  Hi there @wfm1936.

  You will need to have the complete driver installed for the printer on your Mac, features in order to scan to your computer.

  Click on this link, download the driver and follow the installation steps until it is complete. You should be able to analyze later.

  Please keep me informed of the result!

  Have a nice day

• How to add location α all photos in an album?

  How can I add a location α pictures in one album?  I can add one at a time, but not all at once.  With 14 000 + photos scanned from slides, it is very difficult to organize these photos.  I can't sort the master file by file name, to find as "slides" are almost impossible.

  It would be useful that I can change the date and the location of all the photos in a single album.

  Thank you!  -Andy

  You must update to El Capitan that it update the photos to be able to do.

  When you select all the photos you want to give a specific location also.  Open the window "information" (command - 'I') and inside of him, you'll see "Add location" and you can enter in where it was taken.

  You can be very specific if you know specific addresses of the place where they are taken.

  R

• Photo scan of computer image file

  HP Photosmart C5280 All in one, when scanning photo in photo computer file all I get is the screen scanning with the little picture in the upper corner.  I am uable to change or expand before or after scanning.  I've recently updated to windows 7 from XP.

  Any help would be appreciated.

  Hi jfk83,

  I see that you have problems of analysis now since the upgrade to Windows 7.

  This document explains how to scan in Windows 7. There are several ways to scan a picture or document, using the software that came with your HP printer or features built into the Windows operating system. This document provides instructions on scanning with option. - How Scan: Windows 7

   

  If you continue to struggle with the scan task that you are trying to perform, please let me know. I'll give you a pleasure the best assistance I can. Thank you.

• Photosmart HP 6520 prints only in black, even if only selected

  When I select 'black fast project only', I get a printing color. I replaced the black cartridge and the test print just fine. So everything I do or try, can't do the printer to print black scale and Yes more, I have this default :-).

  I use OS X 10.9 Mavericks.

  Driver software & installed properly.

  Please advice. I have about 400 slides to print for studies and most of them is color pdf, it's expensive to print in full colour.

  Thank you in advance!

  Li

  Hey Ladyli

  Welcome to the Forums of HP Support! I see you try to print in black and white for your Photosmart HP 6520, but since I use Mavericks even if you have defined, printing prints always in color.

  I would like that you do the following:

  Reset the printing system

  1. click on the Apple icon and then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. Dialog Print & Fax/scan opens.

  3.right - click (or Ctrl + click) in the left panel, and then click Reset printing system...

  4. click OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Now go ahead and add the printer to the back and continue here: OS X Mavericks: set the print options

  You are now able to print without color? I'll watch for your reply.

  Thank you

• HP Photosmart C4780: HP photosmart C4780 will not scan to my computer

  I plugged in just this HP all-in-one to my computer.  It does not analyze to my computer.  It will scan on an SD card without problem.  What can I do to make the scan to my computer?

  Hi @Lisa213,

  Thank you for joining the HP Forums!

  I read your post on how your HP Photosmart c4780 printer will not scan on your computer. I'm happy to help you!

  A few questions for you:

  • How is the printer connected, wireless, Ethernet or USB?

  • What is the operating system you use, Windows or Mac? What version?

  In the meantime, maybe one of these guides will help:

  • Scan from the computer with the (Windows) HP Solution Center.
  • Digitization of Documents and Photos (OS X).

  For future reference, hereis the user guide for the your printer.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope this helps, and hope to hear from you soon!