piano

Similar Questions

• Terminate subscription magic piano

  I want to cancel subscription magic piano app, how do I do it?

  Click here and follow the instructions.

  (144895)

• I don't hear Roland 501 Piano during playback when recorded in Logic Pro.

  When I record my 501 Piano from Roland in Logic Pro, I do not have the piano through my speakers to read.

  Create an external midi track

  in the way - (port) Inspector to ensure that Roland is selected and all midi channel.

  When you reproduce the track it is routed to the 501.

  If you don't hear it - make sure that Roland is configured to accept midi in reading

• What is the best piano keyboard to use with a macbook air?

  Hi all:

  I would like to know what piano keyboards do you recommend to use with Garageband AND recording via my Macbook Air. I would have preferred a keyboard with many features - modulation of pitch, a good Bank of sounds, at least 6 titles, etc. I know I should have a MIDI output to work. I think maybe a CASIO, YAMAHA or maybe a BERRINGER. Can help you guys?

  Thanks a bunch!

  Rachael

  I have no preference, but try to get a compatible keyboard class requires no drivers to install, or there's plenty wrong with each update of the system on your Mac.

• Piano MIDI pedals on logic pro problems

  the pedals of my piano yamaha arius, the right and the middle ones, produce a sound when connected to logic pro X. I can't pass that off, and it drives me crazy because I can not play with pedals, which sounds terrible depends on music. The right pedal produce a E and the middle one a d. and it its really strong. I need a way to configure them to work as they are supposed to! Thank you

  Post edited by: totentanzfool

  This looks like to me MIDI controller messages being modified in MIDI Note messages. (These message numbers of control pedal, 64-127 and 66-127, correspond to these notes, and the value down to a pedal is 127, which, for a note, would be the largest value for sound intensity). Unfortunately, this can have several causes. A simple thing to try is:

  

  But don't think it will work in your case, as I suspect that the messages are sent by your Yamaha like this, so you will have to consult its manual and maybe its forums to find out what parameters to change. I guess that the Yamaha has a direct USB connection and not a separate MIDI interface?

  In any case, to check that the messages are sent by your Yamaha, download this free app:
  https://www.Snoize.com/MIDIMonitor/

  Here is an example when I type my pedal support:

  

• How to connect a piano keyboard to my mac

  How can I connect piano keyboard to my mac

  That's the big question, how is this possible?  theres NO plug or Midi not entered, my keyboard does not have USB, there must be a way!

• No question of window Input (SIW): with the 8th note selected in SIW, clicking on a note of piano in SIW keyboard, gives a black note.  It has been this way forever?

  I'm learning step entry with step entry window.  Any rate value I put the in the SIW (from note everything in the 64th), the first note is a black note.  By clicking on a different rhythm, immediately after that the black mark appears (in the partition editor, as well as the piano roll) does not change it.

  Is it a known and longstanding problem that seems like it will be ever fixed?  Put more generally, is worth the entry window not shit not learning because of ignored bugs?

  I should have mentioned that I use Logic Pro X v 10.2.3

• How can I stop the Piano subscription renewal

  How can I stop automatic renewal on Piano subscription (automatic renewal)?

  Hello

  Help here > view, change or cancel your subscription - Apple Support

• How to remove a Drum Machine Designer path of piano roll?

  Hello everyone, new user to Logic Pro X here!

  If I right click to 'Clear cell' of Drum Machine Designer to remove all the unused cells of Ibiza pre-set for cleaning.  Who successfully cleared DMD unused cells, but names of drum of the cleared cells remain in the Piano roll and I can't understand how to remove the piano roll.  How?

  Thanks in advance!

  The drum Machine Designer (DMD) is a "surprisingly", super easy to use with a nice user interface. HOWEVER, once you dig a little (or ask questions on this subject), it is revealed to be a really complicated beast. Any operation beyond the essential need to know what really is the designer of drum Machine. BTW, I cover all these details in my graphically improved manual "Logic Pro X - how it works'.»»

  Regarding your question:

  • DMD cells refer to a specific location on the Ultrabeat Plugin (which is loaded on a channel strip separated with DMD and functions as its sound source). In the lower right corner of each cell is a label of a specific key, which is his assignment to the Ultrabeat slot.
  • When you click a cell or play which is not specific, it triggers the sample in the slot of this Ultibeat,
  • When you disable a slot, you disable the assignment to this location, you are NOT clear the sample loaded on the Ultrabeat slot!
  • However, when you load a new sample on the cell in the window of DMD, you will overwrite the sample of the corresponding slot in Ultrabeat.
  • The names of drum displayed in the Piano Roll Editor come directly from the Ultrabeat instrument and not the window DMD. This is the reason why you still see the sample name (drum), even if you have disabled the corresponding cell in the DMD.
  • The only way to get rid of the name, is to rename it to Ultrabeat, for example a hyphen. The assignment of key label ("C1 01:...") "), however, is always displayed. I'm guessing that is cooked in the logic.

  Here is the screenshot that shows the relationship between the names of drum in the Piano Roll and the Ultrabeat Plugin

  

  BTW, in order to obtain the Ultrabeat plug-in, you must open the console, click on the small triangle of the DMD channel strip (which is actually a channel strip to the). The channel strip that opens next to him is the Instrument Channel Strip that has the Plugin loaded Ultrabeat.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• upright piano frame in Logic Pro

  Hi guys;

  I see a lot of grand pianos, but I'm looking for a more intimate atmosphere piano not unlike a piano of apartment.

  Any thoughts?

  Drew

  If you download any additional content

  
  

  Logic Pro X > download additional content

  You can find other acoustic pianos in your library under

  
  

  Heritage > logic > acoustic Pianos.

  If you want more sounds that you may need to do some research online and buy them.

• Piano roll Editor: is it possible to eliminate the spaces between the many notes at once?

  Using the step input method, I entered a number of 1/2 notes in the piano roll Editor.

  

  Then I selected all my notes and decided to shorten all 1/4 notes after realizing that the pace was too slow.

  

  The problem is that I now have many empty spaces between the notes of 1/4:

  Is it possible to eliminate all the spaces between the notes at once with all selected notes notes?

  Or I have to manually move each 1/4 at the end of the previous note footnote 1/4.

  I think there must be a quicker way to do this.

  Select all under the Edition of the piano roll Editor menu or command button has

  Then enter the end of a single note and all selected notes will also expand.

• cannot be quantified in 10.2.2 piano roll

  Hello do not know what is happening, I need a validation test, I can't quantify midi in the piano roll.  screenshot below that I click on the next button Q 1/16 Note slide but the notes do not change.  also does not work if I select Quantize notes in the menu functions.  How can I do this?

  

  It doesn't work if I change it in the region Inspector...

  

  Select the notes you want first quantize

• Listen to the MIDI notes in logic on an external digital piano

  Greetings!

  I own a Yamaha N1 Avantgrand, (which is a digital piano fantasy).

  I use it as a master keyboard and want to lunch records, I have create reading with his sound coming from speakers of this digital piano piano generator.

  My configuration is:

  Yamaha N1: MIDI In and Midi out cable is connected to the

  M-AUDIO UNO MIDI interface connected via USB to

  MBP in Logic Pro X.

  In this configuration, if I create a 'Software Instrument' track in logic, I am able to record MIDI data (support notes, etc.), but it will not play on the speakers of N1. It plays sounds in the computer if I attribute a virtual instrument to the track.

  So I tried to use the option 'External Midi' by creating a new track as an alternative, by selecting the MIDI UNO interface as output but had unsuccessfully to get speakers Yamaha N1 of MIDI events reading. In fact, when I press on play in this context, I am disturb whistles / tones from the computer speakers.

  The folks at Yamaha support say "all you need to do is tell followed South of exit to the UNO interface and the N1 should read exactly as it was recorded".

  Any suggestions on how to achieve this?

  I apologize if this seems a fundamental question to ask!

  Thanks in advance for any help!

  You must use an external midi track not a software instrument track. Once created together the midi port to the inspect to the OR.

  Now reading will come out of the logic of the NC and trigger it.

• How can I change the length of note by default when you use the keyboard as input in piano roll?

  Note the length of the input to the midi keyboard

  Use the keyboard to input stage (Menu bar > window > entry step keyboard) choose the length of the notes you wish to enter the Piano Roll in conjunction with your Midi keyboard...

  

  Turn on the input Midi in the Piano Roll, if you do not have...

  

  Now you play notes on your midi keyboard notes will be length whatever you selected in the step of keyboard input interface...

  Note: If you do not find the keyboard under the window input stage... All the features of Logic work... so make sure you that you have enabled ALL the advanced tools in logic preferences and available for you.

• Selection of a MIDI-controlled effect opens "Classic Electric Piano"

  When I add a software Instrument track and select a MIDI-controlled effect on the menu drop-down:

  What I get is a "classic Electric Piano: parameter

  

  Any suggestions what might be the problem?

  A MIDI effect is not an instrument.  I have to be applied after the instrument.

• Automation of data not in Piano roll - Please Help

  I was wondering if someone could kindly help please

  I use an external controller on a keyboard to change things like cut wide in the ES2 when you use a synth.

  After the change in writing Automation data appears in the area of popular songs, but I can't understand how to do so that he can show below the events of midi notes in the piano roll editor and allow me to also change it. I can always change the same midi control function (like cutting) and he appears in the form of empty data not what I recorded and any change overrides greater automation in terms of titles.

  Is there a way to show the recorded data automation in the piano roll allowing me also change please?

  Thanks for any help

  Use the region based instead of track based automation...

  Click on the image if you don't see it animated...