PIX and RIP:

Similar Questions

• Windows Media Player has stopped playing and ripping of CD

  My Windows Media Player 11 has stopped playing and ripping of CD. I insert the CD, you are prompted to rip, but sometimes even before the CD auto-éjecte without playing or tear. XP OPERATING SYSTEM. Do you want?

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  It is possible that your optical drive needs some maintenance or replacement.

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• PIX and ASA static, dynamic and RA VPN does not

  Hello

  I am facing a very interesting problem between a PIX 515 and an ASA 5510.

  The PIX is in HQ and has several dynamic VPN connections (around 130) and IPsec vpn remote works very well. I had to add a PIX to ASA L2L VPN static and it does not work as it is supposed to be. The ASA 5510, at the remote end, connects and rest for a small period of time, however, all other VPN connections stop working.

  The most interesting thing is that ASA is associated with the dynamic map and not the static map that I created (check by sh crypto ipsec his counterpart x.x.x.x). However, if I make any changes in the ACL 'ACL-Remote' it affects the tunnel between the PIX and ASA.

  Someone saw something like that?

  Here is more detailed information:

  HQ - IOS 8.0 (3) - PIX 515

  ASA 5510 - IOS 7.2 (3) - remote provider

  Several Huawei and Cisco routers dynamically connected via ADSL

  Several users remote access IPsec

  A VPN site-to site static between PIX and ASA - does not.

  Here is the config on the PIX:

  Crypto ipsec transform-set ESP-3DES-ESP-SHA-HMAC-IPSec esp-3des esp-sha-hmac

  Dyn - VPN game 100 Dynamics-card crypto transform-set ESP-3DES-ESP-SHA-HMAC-IPSec

  Crypto dynamic-map Dyn - VPN 100 the value reverse-road

  VPN - card 30 crypto card matches the ACL address / remote

  card crypto VPN-card 30 peers set 20 x. XX. XX. XX

  card crypto VPN-card 30 the transform-set ESP-3DES-ESP-SHA-HMAC-IPSec value

  VPN crypto card - 100 - isakmp dynamic Dyn - VPN ipsec

  interface card crypto VPN-card outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  access list ACL-remote ext ip 10.0.0.0 allow 255.255.255.0 192.168.1.0 255.255.255.0

  Thank you.

  Marcelo Pinheiro

  The problem is that the ASA has a crypto acl defined between host and network, while the remote end has to the network.

  Make sure that the acl is reversed.

• PIX and NAT - T

  Hi all

  I have a small question. I have a couple of users who use routers to connect by VPN to our pix that authenticates by a RAY for L2TP connections. I enabled the NAT - T on our PIX and they may not always connect. Is there anything I might have missed. I checked most of the posts in this forum do not see anything else, I should have activated.

  Can anyone help?

  Thanks in advance.

  Michael

  A tunnel of Lan-to-Lan of a router in a PIX does not NAT - T, unless there is NAT devices between two end points. If this is the case, you must ensure that both the software both from the end of rehbeh points devices support this capability. An example of a router to tunnel PIX IPSec configuration is available at http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094498.shtml

  Another example that deals with the same configuration with NAT is available at

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080094a87.shtml

• VPN between a PIX and a VPN 3000

  I'm trying to set up a VPN between PIX and a VPN 3000. All configurations are complete, but the tunnel has not been established. On the PIX, to 'see the crypto engine' and ' show isakmp his ' orders, I do not see the tunnel. Of "show ipsec his ' command, I can see the mistakes"#send"continues to increase when I try to connect to the remote network. Here is the copy - paste command:

  Tag crypto map: myvpnmap, local addr. 10.70.24.2

  local ident (addr, mask, prot, port): (10.70.24.128/255.255.255.128/0/0)

  Remote ident (addr, mask, prot, port): (10.96.0.0/255.224.0.0/0/0)

  current_peer: 10.70.16.5:0

  LICENCE, flags is {origin_is_acl},

  #pkts program: encrypt 0, #pkts: 0, #pkts 0 digest

  #pkts decaps: 0, #pkts decrypt: 0, #pkts check 0

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 0, #pkts compr. has failed: 0, #pkts decompress failed:

  #send 12, #recv errors 0

  local crypto endpt. : 10.70.24.2, remote Start crypto. : 10.70.16.5

  Path mtu 1500, fresh ipsec generals 0, media, mtu 1500

  current outbound SPI: 0

  SAS of the esp on arrival:

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:

  outgoing ah sas:

  outgoing CFP sas:

  Obviously, the PIX identifies protected traffic but failed to establish the tunnel. I was wondering what could be the reason for these kind of mistakes? That means them growing '#send errors?

  Thank you very much!

  Sending error mean simply the PIX is grateful to encrypt this traffic, but there is no built tunnel and so it must drop the package.

  you will need to look at why the tunnel is not under construction however, "sending error" are just a byproduct of some other configuration issue. On the PIX, it looks like you would have something like:

  Crypto ip 10.70.24.128 access list allow 255.255.255.128 10.96.0.0 255.224.0.0

  On the 3000 under the L2L section and the Local and remote network, you need the exact opposite of the latter, then it would be:

  / Local network mask = 10.96.0.0/0.31.255.255

  / Remote network mask = 10.70.24.128/0.0.0.127

  If you have something else the tunnel will fail to come. Otherwise, we see that the Cryptography debugs the PIX and the trunk of the 3000 when the tunnel is built.

• Installation of site to site VPN IPSec using PIX and ASA

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  I am a site configuration to site IPSec VPN using a PIX515E to site A and ASA5520 to Site B.

  I have attached the lab diagram. Consider PIX and ASA are in default configuration, which means that nothing is configured on both devices.

  According to the scheme

  ASA5520

  External interface is the level of security 11.11.10.1/248 0

  The inside interface is 172.16.9.2/24 security level 100

  Default route is 0.0.0.0 0.0.0.0 11.11.10.2 1

  PIX515E

  External interface is the level of security 123.123.10.2/248 0

  The inside interface is 172.16.10.1/24 security level 100

  Default route is 0.0.0.0 0.0.0.0 123.123.10.1 1

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Could someone tell me how to set up this configuration? I tried but didn't workout. Here is the IKE protocol I have used.

  IKE information:

  IKE Encrytion OF

  MD5 authentication method

  Diffie Helman Group 2

  Failure to life

  IPSEC information:

  IPsec encryption OF

  MD5 authentication method

  Failure to life

  Please enter the following command

  on asa

  Sysopt connection permit VPN

  on pix not sure of the syntax, I think it is

  Permitted connection ipsec sysopt

  What we are trying to do here is basically allowing vpn opening ports

  Alternatively you can open udp 500 and esp (or port ip 50) out to in on the two firewalls

• PIX and non - IP traffic

  I need to install a PIX 501 in a network. The internal interface is connected to my local network and that the external interface is connected to e0 interface of the router.

  The LAN have LLC,(2) and IP traffic. Is possible to LLC,(2) traffic through the firewall without tunnel? Can I connected another interface on the router in the local network only to traffic ll2?

  Thank you

  The PIX only manages the IP traffic, so unless tyou can encapsulate your traffic IP LLC, the PIX won't touch it. I guess you can bypass the PIX and connect a LLC,(2) interface that is only on the router in your home network, depends on how secure you want to be. Make sure that you do not configure an IP address on the router interface, otherwise you will run the risk of someone circumvent security of PIX.

• PIX and SSH - access to PIX via SSH

  Need help with PIX and SSH

  Objective: Connect to PIX via SSH from the 10.1.1.50 IP address behind inside the interface on the PIX using local aaa on PIX.

  Current settings:

  hostname pix1

  example.com domain name

  CA generates the key rsa 1024

  example username password abc123 privileges 15

  include authentication AAA ssh inside 10.1.1.50 255.255.255.255 local

  SSH 10.1.1.50 255.255.255.255 inside

  Thanks for any help!

  Try this:

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

• Site to Site VPN between PIX and Linksys RV042

  I am trying to create a tunnel between a 506th PIX and a Linksys RV042 vpn .  I configured the Phase 1 and Phase 2 as well as the transformation defined and interested traffic and connected to the external interface, but it will not create the tunnel.  Configurations are as follows:

  506th PIX running IOS 6.3

  part of pre authentication ISAKMP policy 40
  ISAKMP policy 40 cryptographic 3des
  ISAKMP policy 40 sha hash
  40 2 ISAKMP policy group
  ISAKMP duration strategy of life 40 86400
  ISAKMP key * address 96.10.xxx.xxx netmask 255.255.255.255
  access-list 101 permit ip 192.168.21.0 255.255.255.0 192.168.1.0 255.255.255.0crypto map Columbia_to_Office 10 ipsec-isakmp
  crypto Columbia_to_Office 10 card matches the address 101
  card crypto Columbia_to_Office 10 set peer 96.10.xxx.xxx
  10 Columbia_to_Office transform-set ESP-3DES-SHA crypto card game
  Columbia_to_Office interface card crypto outside

  Linksys RV042

  Configuration of local groups
  IP only
       IP address: 96.10.xxx.xxx
  Type of local Security group: subnet
  IP address: 192.168.1.0
  Subnet mask: 255.255.255.0

  Configuration of the remote control groups
  IP only
  IP address: 66.192.xxx.xxx
  Security remote control unit Type: subnet
  IP address: 192.168.21.0
  Subnet mask: 255.255.255.0

  IPSec configuration
  Input mode: IKE with preshared key
  Group Diffie-Hellman phase 1: group2
  Phase 1 encryption: 3DES
  Authentication of the phase 1: SHA1
  Life of ITS phase 1: 86400
     
  Phase2 encryption: 3DES
  Phase2 authentication: SHA1
  Phase2 life expectancy: 3600 seconds
  Pre-shared key *.

  I'm a novice on the VPN. Thanks in advance for your expertise.

  Yes, version PIX 6.3 does not support HS running nat or sh run crypto.

  Please please post the complete config if you don't mind.

  Please also try to send traffic between subnets 2 and get the output of:

  See the isa scream his

  See the ipsec scream his

• Version 7.0 of the PIX and ASA 5500

  Hi all

  Is ASA 5500 series identical a PIX 515 or 525 or 535 with version 7.0... I still see some areas where it confused between version 7.0 of the PIX and ASA 5500 series... If not, what are the benefits of ASA 5500 on the PIX 7.0?

  ASA is not the same as PIX, ASA is different hardware architecture. Although both can run the same code. One of the benefits of the SAA is that you can have an IPS module in it to make the prevention of intrusions.

  Search for comprarison on CCO.

• VPN and RIP

  What is the advantage of a vpn to the same location and rip runing? It is even recommended?

  Hi Manny,

  RIP and VPN are not collateral at all.

  1. RIP will serve to make connectivity with the remote site, share the routing so that the remote site can come and browse your shared network etc.
  2. VPN technology will not work unless you have a connectivity with the remote site, it is not used to make connectivity, that is to say if you want to build the VPN tunnel between two sites so these sites should be able to talk them through static or dynamic routing.
  3. Now, the VPN is used to encrypt the traffic on internet, so say for example if you have two sites with full connectivity and you want to send a few doc on remote site, without VPN, he will go plain text across the internet or ISP routers and anyone on the way, say, for example, a hacker can read what you send , but if you use VPN all of this information will be encrypted and no one can tell what's in the package, even if they hack.

  So to sum it all, static RIP, EIGRP, BGP routes are used for connectivity and VPN wrinkles on the already existing connectivity to connect remote sites in a secure way.

  Parminder Sian

• Router vpn site to site PIX and vpn client

  I have two on one interface on the pix vpn connections that terminate VPN. client vpn and VPN site-to-site have passed phase one and two and decrypt and encrypt the packets. However as in another post I can not ping through the l2l vpn. I checked this isn't a nat problem a nd two NAT 0 on the pix and the NAT on the router access lists work correctly.

  ISAKMP crypto RTR #show its
  IPv4 Crypto ISAKMP Security Association
  status of DST CBC State conn-id slot
  66.x.x.x 89.x.x.x QM_IDLE 2001 0 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  local ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)
  current_peer 66.x.x.x port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 23583, #pkts encrypt: 23583 #pkts digest: 23583
  #pkts decaps: 18236, #pkts decrypt: 18236, #pkts check: 18236
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  #send 40, #recv errors 0

  local crypto endpt. : 89.x.x.x, remote Start crypto. : 66.x.x.x
  Path mtu 1380, ip mtu 1380, ip mtu BID Dialer0
  current outbound SPI: 0xC4BAC5E (206285918)

  SAS of the esp on arrival:
  SPI: 0xD7848FB (225986811)
  transform: aes - esp esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 3, flow_id: Motorola SEC 1.0:3, card crypto: PIX_MAP
  calendar of his: service life remaining (k/s) key: (4573083/78319)
  Size IV: 16 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0xC4BAC5E (206285918)
  transform: aes - esp esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 4, flow_id: Motorola SEC 1.0:4, card crypto: PIX_MAP
  calendar of his: service life remaining (k/s) key: (4572001/78319)
  Size IV: 16 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:

  Expand the IP NAT access list
  10 deny ip 192.168.2.0 0.0.0.255 192.168.10.0 0.0.0.255 (21396 matches)
  20 permit ip 192.168.2.0 0.0.0.255 everything (362 matches)
  Expand the IP VPN_ACCESS access list
  10 permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255 (39724 matches)

  I looked on the internet and that it points to a routing error when packets are being encrypted and decrypted, but you can't do a ping on the binding. However when I test the connection I did not enter any of the static routes that networks are connected directly on each side of the pix and the router. any help would be a preciated as I think there's maybe something is blocking the ping to reach the internal network at the end of pix with a configured access list.

  is ping failure of the only thing between the site to site VPN? and assuming that all other traffic works fine since it decrypts and encrypts the packets.

  If it's just ping, then activate pls what follows on the PIX:

  If it is version 6.3 and below: fixup protocol icmp

  If it is version 7.0 and higher: select "inspect icmp" under your political map of the world.

  Config complete hand and on the other could help determine if it's a configuration problem or another problem.

• break the link between the pix and sound

  Ugh I still don't know how to break the link between the pix and the sound in the timeline then of

  the sound and image are together. I know it of easy but have not yet found the way.

  Thank you everyone.

  Right-click on the clip and click 'Remove link' If you just want do temporarily, ALT click on the clip.

• FF 27 - my fonts are pixely and I can't understand why.

  Hello friends,

  About 4 weeks ago, fonts on all the pages I visit using Firefox became pixely (some letters appear in bold, the lines seem to be low resolution, etc.). I tried the following steps to fix without success:

  -Update of FF 27
  -Reset by default
  -Turn off hardware acceleration

  Here is a link to a comparison of the FF27 vs Chrome vs IE screenshot: http://i.imgur.com/f8EBC6p.png

  The only thing I can think of that may be the culprit, it is at the same time, I got a new monitor that requires a display installed on my laptop driver.

  What other troubleshooting measures can I take to help address the display of police while I use my beloved Firefox?

  Any help is appreciated.

  Thank you.

  Try to play with this:
  =

  layers.acceleration.disabled: True
  

  And make sure that firefox has the updated driver, you can check in "subject: support.

  and try turning off hardware acceleration: try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.