PIX console timeout
PIX 515E v6.2 (2)
Is anyone know the command to a PIX console session after 15 minutes time?
Copy tftp flash and upgrade to the code 6.3 (1) ;)
New command that has been added in point 6.3. No way to timeout a console session in by 6.3 code (for example 6.2 (2)). 6.3, you would use the command console - http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/c.htm#1103513
Scott
Tags: Cisco Security
Similar Questions
-
I have setup a new vCenter to replace the old (new on MS server 2008, an old man on MS server 2003), but after registering the VM´s, I am not able to connect to them with the console. Error message: unable to connect to the MKS: Timeout during an attempt to read
If I connect directly to the host ESX 4 it works fine.
Is that what someone has any ideas, how to solve this problem? I have already tried:
-Added the new vCenter address and IP to the/etc/hosts
-restart the ESX servers
-Re-installed VMware tools to the new vCenter
None of the above has helped, and I start to desperate... Anyone have an idea?
If you use vcenter to manage your servers from another computer. You should try to disable the windows firewall on the vcenter computer that manages the esx server. He worked for another problem in the past. Windows firewall started blocking applications of mks someday and we don't know why. Allowing exceptions in windows firewall did not work if the firewall has been turned off completely and then it worked.
(Please allow points)
-
VMware view Administrator console... increase timeout
Hi guys
just migrated to view 4.5 and everything was fine...
Is it possible to increase the limit of the Vmware view admin console timeout? I would have the dashboard always on my 2nd screen without going all day logon due to delays...
Thanks
Very well, you can do this by following these steps:
Go to: Display Configuration > global settings > check Activate the automatic updates.
You'll notice that the heading aid next to him said: "the idle session timeouts not happen when automatic updates are enabled, causing the Administrator display to remain active until the browser is closed or an explicit logout is performed."
This will allow you to follow the Administrator display without waiting times. (And you don't forget to lock your workstation when you leave your desk anyway, so you should be fine. )
-
Connectivity random Cisco Pix 501
Hello. I'm having some trouble with my CISCO PIX 501 Setup.
A few months I started having random disconnects on my network (from inside to outside). The machines can ping the DC or the Pix, but impossible to surf the internet. The only way to make them go outside is a reboot of Pix.
My configuration is:
-----------
See the ACE - pix config (config) #.
: Saved
: Written by enable_15 at 09:23:07.033 UTC Tuesday, June 3, 2014
6.3 (3) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry34retyt7RR564 encrypted password
2fvbbfgdI.2KUOU encrypted passwd
hostname as pix
domain as.local
fixup protocol dns-length maximum 512
fixup protocol esp-ike
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list acl_out permit icmp any one
ip access list acl_out permit a whole
access-list acl_out permit tcp any one
Allow Access-list outside_access_in esp a whole
outside_access_in list access permit udp any eq isakmp everything
outside_access_in list of access permit udp any eq 1701 all
outside_access_in list of access permit udp any eq 4500 all
outside_access_in ip access list allow a whole
pager lines 24
Outside 1500 MTU
Within 1500 MTU
outside 10.10.10.2 IP address 255.255.255.0
IP address inside 192.168.100.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
history of PDM activate
ARP timeout 14400
Global 1 10.10.10.8 - 10.10.10.254 (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
access to the interface inside group acl_out
Route outside 0.0.0.0 0.0.0.0 10.10.10.1 0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.10.2 255.255.255.255 inside
http 192.168.10.101 255.255.255.255 inside
http 192.168.100.2 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
ISAKMP nat-traversal 20
Telnet timeout 5
SSH 192.168.10.101 255.255.255.255 inside
SSH timeout 60
Console timeout 0
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
Terminal width 80
Cryptochecksum:7f9bda5e534eaeb1328ab08a3c4d28a
------------Do you have any advice? I don't get what's wrong with my setup.
My DC is 192.168.100.2 and the network mask is 255.255.255.0
The network configuration is configured to set the IP of the gateway to 192.168.100.1 (i.e. the PIX 501).
I have about 50 + peers on the internal network.
Any help is apprecciate.
Hello
You have a license for 50 users +?
After the release of - Show version
RES
Paul
-
How to configure the PPPoE on PIX 501?
Mailto: [email protected] / * /
According to the below URL Cisco TAC:
but I always failed. And my PIX 501 Configuration noted below:
pixfirewall # write terminal
Building configuration...
: Saved
:
6.3 (1) version PIX
interface ethernet0 10baset
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable password xxxx
passwd xxxx
pixfirewall hostname
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
names of
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside pppoe setroute
IP address inside 192.168.1.254 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route inside 10.0.0.0 255.0.0.0 192.168.1.1 1
Route inside 20.0.0.0 255.0.0.0 192.168.1.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
VPDN group pppoex request dialout pppoe
Cisco localname VPDN group pppoex
VPDN group ppp authentication pap pppoex
VPDN username xxxx password *.
Terminal width 80
Cryptochecksum:xxxx
: end
[OK]
See the pixfirewall version #.
Cisco PIX Firewall Version 6.3 (1)
Cisco PIX Device Manager Version 1.1 (2)
Updated Thursday 19 March 03 11:49 by Manu
pixfirewall until 58 mins 6 dry
Material: PIX - 501, 16 MB RAM, 133 MHz Am5x86 CPU
Flash E28F640J3 @ 0 x 3000000, 8 MB
BIOS Flash E28F640J3 @ 0xfffd8000, 128KB
0: ethernet0: the address is 000b.fd58.886b, irq 9
1: ethernet1: the address is 000b.fd58.886c, irq 10
Features licensed:
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Maximum Interfaces: 2
Cut - through Proxy: enabled
Guardians: enabled
URL filtering: enabled
Internal hosts: 50
Throughput: unlimited
you have all the debugging logs?
-
Hello
I got a pix 501 (6.3 - 4) on a local network and try to use Cisco VPN Client (4.0.2-D) on a remote pc.
I can open a vpn session.
I can't ping from the remote pc to the LAN
I can ping from any station on the LAN to the remote pc
After that I did a ping of a station on the LAN to the remote pc, I ping the remote computer to the local network.
I am so newb, trying for 2 days changing ACLs, no way.
I must say that I am in dynamic ip wan on the local network and the remote pc.
Any idea about this problem?
Any help is welcome.
Here is the configuration of my pix:
6.3 (4) version PIX
interface ethernet0 10baset
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password * encrypted
passwd * encrypted
pixfirewall hostname
domain ciscopix.com
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
fixup protocol dns-length maximum 512
fixup protocol ftp 21
correction... /...
fixup protocol tftp 69
names of
name 192.168.42.0 Dmi
inside_access_in ip access list allow a whole
inside_outbound_nat0_acl ip access list allow any 192.168.229.0 255.255.255.0
outside_cryptomap_dyn_20 ip access list Dmi 255.255.255.0 allow 192.168.229.32 255.255.255.224
access-list outside_cryptomap_dyn_20 allow icmp a whole
pager lines 24
opening of session
logging trap information
Outside 1500 MTU
Within 1500 MTU
IP address outside the 209.x.x.x.255.255.224
IP address inside 192.168.42.40 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool dmivpndhcp 192.168.229.1 - 192.168.229.254
location of PDM 192.168.229.1 255.255.255.255 outside
209.165.x.x.x.255.255 PDM location inside
209.x.x.x.255.255.255 PDM location outdoors
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 209.165.200.225 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
Dmi 255.255.255.0 inside http
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
TFTP server inside the 192.168.42.100.
enable floodguard
Permitted connection ipsec sysopt
AUTH-prompt quick pass
AUTH-guest accept good
AUTH-prompt bad rejection
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
Dynamic crypto map dynmap 20 match address outside_cryptomap_dyn_20
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
vpngroup address dmivpndhcp pool dmivpn
vpngroup dns 192.168.42.20 Server dmivpn
vpngroup dmivpn wins server - 192.168.42.20
vpngroup dmivpn by default-field defi.local
vpngroup idle 1800 dmivpn-time
vpngroup password dmivpn *.
Telnet timeout 5
SSH timeout 5
Console timeout 0
VPDN username vpnuser password *.
VPDN allow outside
VPDN allow inside
dhcpd address 192.168.42.41 - 192.168.42.72 inside
dhcpd lease 3600
dhcpd ping_timeout 750
Terminal width 80
Cryptochecksum: *.
Noelle,
Add the command: (in config mode): isakmp nat-traversal
Let me know if it helps.
Jay
-
Road by default from version 6.3 PIX IPsec tunnel
We have a PIX 501 running IOS version 6.3.1.
There are currently 3 tunnels IPsec active as described below.
What we would like is to have all traffic by default (0.0.0.0 0.0.0.0) range out through the tunnel of the middle line so that traffic can be protected by a firewall on the other side of the tunnel. Since ICF is a Sonicwall what would be needed to be changed in the configuration on the PIX to get there?
Thank you
6.3 (1) version PIX
interface ethernet0 10baset
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the 86AZXXmRLxfv/oUQ encrypted password
86AZXXmRLxfv/oUQ encrypted passwd
Site A hostname
domain default.int
clock timezone STD - 7
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
name 75.75.75.2 CovadHub
name 75.48.25.12 Sonicwall
access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.1.0 255.255.255.0
access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.2.0 255.255.255.0
access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.3.0 255.255.255.0
access-list 101 permit icmp any any echo response
access-list 101 permit icmp any any echo
access-list 102 permit ip 10.10.5.0 255.255.255.0 10.10.2.0 255.255.255.0
access-list 103 allow ip 10.10.5.0 255.255.255.0 10.10.1.0 255.255.255.0
access-list 104. allow ip 10.10.5.0 255.255.255.0 10.10.3.0 255.255.255.0
pager lines 24
opening of session
monitor debug logging
logging warnings put in buffered memory
ICMP allow 10.10.5.0 255.255.255.0 inside
Outside 1500 MTU
Within 1500 MTU
external IP 75.25.14.2 255.255.255.0
IP address inside 10.10.5.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 10.10.5.0 255.255.255.0 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
allow icmp a conduit
Route outside 0.0.0.0 0.0.0.0 75.25.14.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
NTP server 132.163.4.102 source outdoors
NTP server 129.7.1.66 source outdoors
Enable http server
http 10.10.1.0 255.255.255.0 inside
http 10.10.5.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-md5-hmac pix11
peer11 card crypto ipsec-isakmp 10
correspondence address 10 card crypto peer11 102
peer11 card crypto 10 peers set 75.95.21.41
peer11 card crypto 10 set transform-set pix11
11 peer11 of ipsec-isakmp crypto map
correspondence address 11 card crypto peer11 103
11 peer11 peer Sonicwall crypto card game
card crypto peer11 11 set transform-set pix11
12 peer11 of ipsec-isakmp crypto map
correspondence address 12 card crypto peer11 104
card crypto peer11 12 set peer 75.62.58.28
card crypto peer11 12 set transform-set pix11
peer11 interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 75.62.58.28 netmask 255.255.255.240
ISAKMP key * address netmask 255.255.255.224 Sonicwall
ISAKMP key * address 75.95.21.41 netmask 255.255.255.252
ISAKMP identity address
ISAKMP keepalive 10
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
part of pre authentication ISAKMP policy 11
encryption of ISAKMP policy 11
ISAKMP policy 11 md5 hash
11 2 ISAKMP policy group
ISAKMP duration strategy of life 11 28800
part of pre authentication ISAKMP policy 12
encryption of ISAKMP policy 12
ISAKMP policy 12 md5 hash
12 2 ISAKMP policy group
ISAKMP duration strategy of life 12 36000
Telnet 10.10.5.0 255.255.255.0 inside
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 60
Console timeout 0
dhcpd address 10.10.5.70 - 10.10.5.101 inside
dhcpd dns 10.10.1.214
dhcpd rental 43200
dhcpd ping_timeout 750
dhcpd field default.int
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:36d2c26afa8
03957d 3659
868d9219f8
2
: end
Hello
You do not configure really any type of default route for the VPN L2L. You match rather traffic with 'everything' destination on configuring VPN L2L. Basically you would like to configure the VPN L2L ACL encryption with the 'whole' destination map
I guess in your case it would be the ACL named "103".
access-list 103 allow ip 10.10.5.0 255.255.255.0 any
IP 10.10.5.0 doesn't allow any access list 103 255.255.255.0 10.10.1.0 255.255.255.0
Naturally, your NAT0 ACL configuration should also reflect this change. I guess the end remote Sonicwall'd private NAT to public Internet access in this case whereas. I guess that in this case, the ACL NAT0 might even be just this one rule ACL
access-list 101 permit ip 10.10.5.0 255.255.255.0 any
BUT what I was asking however for now mainly is the fact it has a priority of '11' in the 'crypto map' which has between 2 other L2L VPN connections.
peer11 card crypto ipsec-isakmp 10
correspondence address 10 card crypto peer11 102
peer11 card crypto 10 peers set 75.95.21.41
peer11 card crypto 10 set transform-set pix11
11 peer11 of ipsec-isakmp crypto map
correspondence address 11 card crypto peer11 103
11 peer11 peer Sonicwall crypto card game
card crypto peer11 11 set transform-set pix11
12 peer11 of ipsec-isakmp crypto map
correspondence address 12 card crypto peer11 104
card crypto peer11 12 set peer 75.62.58.28
card crypto peer11 12 set transform-set pix11
If you have changed the destination address of '103' crypto VPN L2L ACL at "" I guess that would probably cause so that the last connection VPN L2L with "12" priority may stop working since the previous connection already corresponds to 'all' your network 'inside' destination address.
The solution might be to delete the current configuration of the '11' priority and add it with '13' for example, so that the other 2 connections VPN L2L could continue to work and all the rest of the traffic would be passed to the connection VPN L2L with Sonicwall as the remote peer.
No crypto map ipsec-isakmp 11 peer11
no correspondence address 11 card crypto peer11 103
no set of 11 peer11 card crypto don't peer Sonicwall
No peer11 11 set transform-set pix11 crypto card
13 peer11 of ipsec-isakmp crypto map
correspondence address 13 card crypto peer11 103
13 card crypto peer Sonicwall peer11 game
card crypto peer11 13 pix11 transform-set game
I have to say that this is how I expect it should work. I worked with VPN L2L that have been configured in this way but its quite rare.
If you want to try something like that, of course, be ready to return to the old configuration with your admins of the remote peer, if things do not work. I guess more difficult configurations changes must be made on the remote end while your configuration of the ends should be fairly simple.
Hope this helps
-Jouni
-
Unable to connect to PDM on PIX 501
just cannot understand this. I have a PIX 501 I used to connect very well. Now I can't get the PDM to come up inside, outside, nothing. I use the same (old) of JAVA 1.4 version I always used. I can Telnet etc... Very well. The HTTP server is enabled and have granted access from my IP address. Any help would be greatly appreciated. See my config below.
See the pixfirewall # running
: Saved
:
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry2YjIyt7RRXU24 encrypted password
passwd encrypted XXXXXXXX
pixfirewall hostname
domain ciscopix.com
clock timezone IS - 5
clock to summer time EDT recurring
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 X 0
fixup protocol h323 ras X 18 - X 19
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
name admin_subnet X.X.X.X
inside_outbound_nat0_acl X.X.X.X 255.255.255.0 ip access list allow admin_
subnet 255.255.0.0
inside_outbound_nat0_acl X.X.X.X 255.255.255.0 ip access list allow X.X
. X.X 255.255.255.0
outside_cryptomap_20 X.X.X.X 255.255.255.0 ip access list permit admin_subn
and 255.255.0.0
outside_cryptomap_20 X.X.X.X 255.255.255.0 ip access list allow X.X.X
. X 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP outside X.X.X.X 255.255.255.128
inside X.X.X.X 255.255.255.0 IP address
alarm action IP verification of information
alarm action attack IP audit
PDM location admin_subnet 255.255.0.0 outside
location of PDM X.X.X.X 255.255.255.0 inside
PDM location x.x.x.x 255.255.255.255 outside
location of PDM X.X.X.X 255.255.255.0 outside
location of PDM X.X.X.X 255.255.255.255 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 X.X.X.X 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http X.X.X.X 255.255.255.0 inside
http admin_subnet 255.255.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map pfs set 20 group2
card crypto outside_map 20 game peers X.X.X.X
outside_map crypto 20 card value transform-set ESP-AES-256-SHA
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * address X.X.X.X 255.255.255.255 netmask No.-xauth non - co
Nfig-mode
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 aes-256 encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 8 X 00
Telnet X.X.X.X 255.255.255.0 outside
Telnet X.X.X.X 255.255.255.0 inside
Telnet admin_subnet 255.255.0.0 inside
Telnet timeout 30
ssh X.X.X.X 255.255.255.255 outside
X.X.X.X 255.255.255.0 inside SSH
SSH timeout 30
management-access inside
Console timeout 30
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
username password XXXXXX XXXXXXXXXXX encrypted privilege 15
Terminal width 80
Cryptochecksum:
: endHello Mark,
lol Nice to know that everything works fine now
Don't forget to mark it as answered and to classify the useful messages (if you don't know how to evaluate a message just to get to the bottom of each answer and mark 1 being a wrong answer, being a great answer 5 stars)
Kind regards
Julio
PD: Some kudos for you (because of the answer)
-
I need help setting up a Cisco PIX 506th Version 6.3 (5)
I use the PDM to configure the device, because I don't know enough of CLI. I want to just the simplest of configurations.
Here is what is happening, I set up then I hang the Interface 1 to my laptop and use DHCP to get an ip address, but I can't get out to the internet like that. Thanks PDM tools, I can ping outside the IPS very well.
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of DkreNA9TaOYv27T8
c4EBnG8v5uKhu.PA encrypted passwd
hostname EWMS-PIX-630
domain ciscopix.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
object-group service udp test
port-object eq isakmp
inside_access_in ip access list allow a whole
access-list inside_access_in allow a tcp
access-list inside_access_in allow icmp a whole
Allow Access-list inside_access_in esp a whole
inside_access_in tcp allowed access list all eq www everything
inside_outbound_nat0_acl list of permitted access interface ip inside 10.10.10.96 255.255.255.240
inside_outbound_nat0_acl ip access list allow any 10.10.10.192 255.255.255.224
pager lines 24
timestamp of the record
recording of debug trap
host of logging inside the 10.10.10.13
Outside 1500 MTU
Within 1500 MTU
IP outdoor 75.146.94.109 255.255.255.248
IP address inside 10.10.10.250 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 10.10.10.1 255.255.255.255 inside
location of PDM 10.10.10.13 255.255.255.255 inside
location of PDM 10.10.10.253 255.255.255.255 inside
location of PDM 75.146.94.105 255.255.255.255 inside
location of PDM 75.146.94.106 255.255.255.255 inside
location of PDM 10.10.10.96 255.255.255.240 outside
location of PDM 10.10.10.192 255.255.255.224 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 0 0.0.0.0 0.0.0.0 0 0
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 75.146.94.110 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-RADIUS (inside) host 10.10.10.1 server timeout 10
AAA-server local LOCAL Protocol
Enable http server
http 10.10.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
ISAKMP allows outside
ISAKMP peer ip 206.196.18.227 No.-xauth No.-config-mode
ISAKMP nat-traversal 20
ISAKMP policy 20 authentication rsa - sig
encryption of ISAKMP policy 20
ISAKMP policy 20 md5 hash
20 1 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
part of pre authentication ISAKMP policy 40
encryption of ISAKMP policy 40
ISAKMP policy 40 md5 hash
40 2 ISAKMP policy group
ISAKMP duration strategy of life 40 86400
ISAKMP policy 60 authentication rsa - sig
encryption of ISAKMP policy 60
ISAKMP policy 60 md5 hash
60 2 ISAKMP policy group
ISAKMP strategy life 60 86400
Telnet 10.10.10.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 10.10.10.2 - 10.10.10.5 inside
dhcpd dns 68.87.72.130
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd allow inside
btork encrypted Ww3clvi.ynWeGweE privilege 15 password username
vpnclient Server 10.10.10.1
vpnclient-mode client mode
vpnclient GroupA vpngroup password *.
vpnclient username btork password *.
Terminal width 80
Cryptochecksum:5ef06e69c17b6128e1778e988d1b9f5d
: end
[OK]any HEP would be appreciated.
Brian
Brian
NAT is your problem, IE.
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 0 0.0.0.0 0.0.0.0 0 0presumanly first NAT is fot your good VPN that acl looks a little funny, what exactly are you doing with that?
The second NAT is the real problem but for outgoing internet access - the NAT statement, you said not NAT one of your addresses 10.10.10.x which is a problem as 10.x.x.x address is not routable on the Internet.
You must change this setting IE. -
(1) remove the second NAT statement IE. "no nat (inside) 0 0.0.0.0 0.0.0.0.
(2) add a new statement of NAT - ' nat (inside) 1 0.0.0.0 0.0.0.0.
(3) add a corresponding statement global - global (outside) 1 interface.
This will be PAT all your 10.10.10.x to external IP addresses.
Apologies, but these are some CLI commands that I don't use PDM.
Jon
-
PIX 501 with public several IP addresses
Hi all
I have the following configuration:
audience of 6 IP addresses, for example: 123.123.123.1 - 6 255.255.255.248
My provider, I have a Zyxel modem which has the 123.123.123.1 IP address, which is also the default gateway for my PIX.
The PIX is connected to a modem Zyxel.
The external interface of the PIX, 123.123.123.2 and the inside interface 192.168.1.1 255.255.255.0
At my home I have several client computers and network servers 3.
Client computers must be able to connect to the internet.
Server should have the public IP 123.123.123.3 and 192.168.52.3 inside
Server B must have public IP 123.123.123.4 and 192.168.52.4 inside
Server C must have public IP 123.123.123.5 and 192.168.52.5 inside
Server 3 are Web servers and should be accessible from the outside on ports 80 and 443.
My current setup is:
See the pixfirewall (config) # executes
: Saved
:
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password
encrypted passwd
pixfirewall hostname
domain ciscopix.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
object-group service tcp web
port-object eq www
EQ object of the https port
OUTSIDE of the ip access list allow any host 123.123.123.3
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP outdoor 123.123.123.2 255.255.255.248
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.1.0 255.255.255.0 inside
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 192.168.1.0 255.255.255.0 0 0
static (inside, outside) tcp 123.123.123.3 www 192.168.1.3 www netmask 255.255.255.255 0 0
Access-group OUTSIDE in interface outside
Route outside 0.0.0.0 0.0.0.0 123.123.123.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet 192.168.1.0 255.255.255.0 inside
Telnet 192.168.2.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
Terminal width 80
: end
pixfirewall (config) #.This acutally configuration only allows connections from the inside to the outside but not from the outside to connect to the server.
I'm sure miss me something stupid, maybe someone could give me a hint?
Mike
Setup looks quite right, assuming that you only test connectivity to Server A (123.123.123.3) as it is the only one configured.
I suggest that you make 'clear xlate' and 'clear the arp' and test again. I would check to see if your modem has the ARP entry for 123.123.123.3 and it should point to the ethernet0 PIX MAC address.
-
Here is my configuration:
local-pix 501 connected to the DSL line.
506th pix remote control connected to the dsl line
unique IP address routable on each PIX (so using PAT, no NAT).
try to create a site to site vpn. Tried of PDM, CLI via documentation cisco CLI via the book of Richard Deal. I can apparently make the connections, but no traffic flows. I have no idea what I'm doing wrong. Here are the relevant configs:
PIX of premises:
6.3 (3) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password
passwd
hostname encima
domain name gold - eagle.org
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list outside_access_in allow accord 64.144.92.0 255.255.255.128 no matter what newspaper
outside_access_in list of access permitted tcp 64.144.92.0 255.255.255.128 eq pptp pptp log any eq
outside_access_in list access permit icmp any any echo response
access-list outside_access_in allow icmp all once exceed
outside_access_in list access permit icmp any any source-quench
outside_access_in list all permitted access all unreachable icmp
outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114
outside_access_in list of permitted access esp 67.100.95.114 host 66.159.222.109
access-list 90 allow ip 172.17.0.0 255.255.255.0 172.24.1.0 255.255.255.0
pager lines 24
opening of session
registration of information monitor
logging buffered information
ICMP permitted host 67.100.95.114 outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside x.x.x.109 255.255.255.0
IP address inside 172.17.0.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 172.24.1.0 255.255.255.0 outside
location of PDM 172.17.0.0 255.255.255.0 outside
location of PDM 64.144.92.0 255.255.255.128 outside
location of PDM 172.17.0.0 255.255.0.0 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) - 0-90 access list
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 66.159.222.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
Enable http server
x.x.x.x 255.255.255.255 out http
x.x.x.x 255.255.255.128 out http
http 172.17.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set strong esp-3des esp-sha-hmac
toEssex 20 ipsec-isakmp crypto map
correspondence address card crypto 20 90 toEssex
peer set card crypto toEssex 20 67.100.95.114
toEssex 20 set transformation-strong crypto card
toEssex interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 67.100.95.114 netmask 255.255.255.255
part of pre authentication ISAKMP policy 9
ISAKMP policy 9 3des encryption
ISAKMP policy 9 sha hash
9 1 ISAKMP policy group
ISAKMP policy 9 life 86400
Telnet 172.17.0.0 255.255.255.0 inside
Telnet timeout 60
SSH x.x.x.x 255.255.255.128 outside
SSH timeout 60
Console timeout 0
dhcpd address 172.17.0.2 - 172.17.0.32 inside
dhcpd dns x.x.x.100 66.218.44.5
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
username ckaiser password * encrypted privilege 15
Terminal width 80
Cryptochecksum:xxxxxx
: end
PIX remotely:
6.3 (1) version PIX
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password
passwd
EVL-PIX-DSL host name
domain essexcredit.com
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
names of
access-list outside_access_in allow accord any any newspaper
outside_access_in list access permit tcp any any eq pptp newspaper
outside_access_in list access permit icmp any any echo response
access-list outside_access_in allow icmp all once exceed
outside_access_in list access permit icmp any any source-quench
outside_access_in list all permitted access all unreachable icmp
outside_access_in esp x.x.x.114 host 66.159.222.109 host allowed access list
outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114
access-list 80 allow ip 172.24.1.0 255.255.255.0 172.17.0.0 255.255.255.0
pager lines 24
opening of session
timestamp of the record
monitor debug logging
logging buffered information
recording of debug trap
history of logging warnings
logging feature 22
ICMP permitted host x.x.222.109 outdoor
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside x.x.x.114 255.255.255.248
IP address inside 172.24.1.240 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
PDM location x.x.x.x 255.255.255.255 outside
location of PDM 172.24.1.0 255.255.255.0 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) - 0 80 access list
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 67.100.95.113 1
Route outside x.x.x.0 255.255.0.0 66.159.222.109 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
Enable http server
x.x.x.x 255.255.255.255 out http
http 172.24.1.0 255.255.255.0 inside
SNMP-server host within the 172.24.1.11
Server SNMP Emeryville, CA location
Server SNMP contact Charlie Kaiser
snmp4esx SNMP-Server community!
SNMP-Server enable traps
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set strong esp-3des esp-sha-hmac
toEncima 10 ipsec-isakmp crypto map
correspondence address card crypto 10 80 toEncima
peer set card crypto toEncima 10 66.159.222.109
toEncima card 10 game of transformation-strong crypto
toEncima interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 66.159.222.109 netmask 255.255.255.255
part of pre authentication ISAKMP policy 8
ISAKMP strategy 8 3des encryption
ISAKMP strategy 8 sha hash
8 1 ISAKMP policy group
ISAKMP life duration strategy 8 the 86400
Telnet 172.24.1.0 255.255.255.0 inside
Telnet timeout 60
SSH x.x.x.x 255.255.255.255 outside
SSH timeout 60
Console timeout 0
username ckaiser password * encrypted privilege 15
Terminal width 80
Cryptochecksumxxxxxx
: end
When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. Connectivity Internet is fine. I can ping the addresses outside each pix OK.
My debug output for isakmp shows the State of return is IKMP_NO_ERROR and the SAs look OK; everything matches. Several configs / debugs available upon request.
No idea why I can't get from one network to the other?
Thank you!
Charlie Kaiser
"When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. »
It could be as simple as because you try to ping from the PIX (because you can't) and your tunnel could in fact be working properly
Try to ping from a device on 172,17 to one in 172.24.
(Make sure that your access point to the opposing LAN for these host devices are set to be the PIX)
HTH
-
VPN client to PIX - no bytes received on client
I have a PIX with 6.3 (4) and the Client VPN 5.0.06.0110. I can establish a tunnel, but can not pass traffic beyond the PIX to the customer network. I ping the inside of the PIX, I believe that the tunnel is very well, but maybe the ACL is bad? Once the tunnel is established, under details statistics/Tunnel the bytes sent back, but the received bytes remaining to 0.
If someone would like to chime, I'd appreciate it.
pixfirewall # sh conf
: Saved
: Written by enable_15 at 14:45:50.611 UTC Tuesday, December 15, 2009
6.3 (4) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable the encrypted password xxxxx
XXXXX encrypted passwd
pixfirewall hostname
domain xxx.com
fixup protocol dns-maximum length 4096
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 192.168.27.0 255.255.255.0 10.10.10.0 255.255.255.0
access-list 102 permit ip 192.168.27.0 255.255.255.0 10.10.10.0 255.255.255.0
pager lines 24
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside 209.xxx.xxx.248 255.255.255.255
IP address inside 192.168.27.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool ippool 10.10.10.1 - 10.10.10.254
PDM logging 100 information
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 209.xxx.xxx.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-md5-hmac gvnset
Crypto-map dynamic dynmap 10 transform-set gvnset
gvnmap 10 card crypto ipsec-isakmp dynamic dynmap
gvnmap interface card crypto outside
ISAKMP allows outside
ISAKMP key * address xxx.xxx.142.105 netmask 255.255.255.255
ISAKMP identity address
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 9
encryption of ISAKMP policy 9
ISAKMP policy 9 md5 hash
9 2 ISAKMP policy group
ISAKMP policy 9 life 28800
vpngroup address ippool pool gvnclient
vpngroup dns 192.168.27.1 Server gvnclient
vpngroup gvnclient wins server - 192.168.27.1
vpngroup gvnclient by default-domain xxx.com
vpngroup split tunnel 101 gvnclient
vpngroup idle 1800 gvnclient-time
vpngroup password gvnclient *.
Telnet 192.168.27.0 255.255.255.0 inside
Telnet timeout 15
SSH timeout 60
management-access inside
Console timeout 0
Terminal width 80
Cryptochecksum:xxx
pixfirewall #.Servers on the 192.168.27.0 network probably need a route that points the 10.10.10.0/24 network to the PIX. It is possible that your customer VPN traffic if he imagines, but the other end does not know how to get back.
-
PIX of Pix VPN easy - Almost there... Need help :(
I spent countless hours now implementing a VPN Pix Pix. I thought I would post this in the hope that someone could help me.
I can get my Pix 501 to open a tunnel to the 506th Pix. These are both on different ISPS.
I can ping from the Pix to the Pix 501 console 506e inside the IP Interface.
I can ping from the console of the 506th Pix to the Pix 501 inside the IP Interface.
I cannot ping hosts either pix beyond the inside interface.
With the active 7 recording console, I have the following error when ping to the host 172.16.54.5 from the console on the Pix 501.
305005: any group not found for icmp src, dst outside translation: 100.1.1.10 inside: 172.16.54.5 (type 8, code 0)
For reasons of confidentiality, I changed the IP addresses and passwords.
PIX506e outside (isps1): 200.1.1.10
Isps1 Gateway: 200.1.1.1PIX501 outdoors (PSI): 100.1.1.10
ISP2 Gateway: 100.1.1.1Here is my configuration:
506th PIX (server)
----------------------------------------------
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password * encrypted
passwd * encrypted
hostname VPNServer
mydomain.com domain name
clock timezone CST - 6
clock to summer time recurring CDT
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit icmp any one
IP 172.16.54.0 allow Access - list SHEEP 255.255.255.0 192.168.6.0 255.255.255.0
access-list ip 192.168.6.0 SHEEP allow 255.255.255.0 172.16.54.0 255.255.255.0
access-list 110 permit ip 172.16.54.0 255.255.255.0 192.168.6.0 255.255.255.0
access-list 110 permit ip 192.168.6.0 255.255.255.0 172.16.2.0 255.255.255.0
access-list 110 permit ip 100.1.1.10 host 172.16.2.0 255.255.255.0
pager lines 24
opening of session
Outside 1500 MTU
Within 1500 MTU
IP outdoor 200.1.1.10 255.255.255.128
IP address inside 172.16.54.5 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool vpnpool 172.16.54.201 - 172.16.54.210
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group 110 in the interface inside
Route outside 0.0.0.0 0.0.0.0 200.1.1.1 1
Route inside 172.16.2.0 255.255.255.0 172.16.54.254 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 10 transform-set RIGHT
map mymap 10-isakmp ipsec crypto dynamic dynmap
client authentication card crypto LOCAL mymap
mymap outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address vpnpool pool mygroup
vpngroup mygroup 172.16.2.1 dns server
vpngroup mygroup by default-domain mydomain.com
vpngroup idle time 1800 mygroup
mygroup vpngroup password *.
vpngroup idle-idle time 1800
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
management-access inside
Console timeout 0
VPDN username myuser password *.
VPDN allow outside
password username myuser * encrypted privilege 2
Terminal width 80
----------------------------------------------PIX 501 (Client)
----------------------------------------------
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password * encrypted
passwd * encrypted
vpnclient hostname
mydomain.com domain name
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 17
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 100 permit icmp any one
pager lines 24
opening of session
monitor debug logging
Outside 1500 MTU
Within 1500 MTU
external IP 100.1.1.10 255.255.255.0
IP address inside 192.168.6.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group 100 in external interface
Route outside 0.0.0.0 0.0.0.0 100.1.1.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet 192.168.6.0 255.255.255.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 30
management-access inside
Console timeout 0
dhcpd address 192.168.6.20 - 192.168.6.200 inside
dhcpd dns 172.16.2.1 172.16.2.2
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd allow inside
vpnclient Server 200.1.1.10
vpnclient mode network-extension-mode
vpnclient mygroup vpngroup password *.
vpnclient username myuser password *.
vpnclient enable
Terminal width 80
----------------------------------------------assuming that you want to send traffic between the subnet 172.16.54.0/24 and 192.168.6.0/24 in the tunnel.
1 ip local pool vpnpool 172.16.54.201 - 172.16.54.210< please="" use="" ip="" in="" a="" different="" subnet.="" current="" ip="" is="" in="" the="" same="" subnet="" as="" inside="">
' 2. you have not 'need' ip 192.168.6.0 allow access-list SHEEP 255.255.255.0 172.16.54.0 255.255.255.0.
3. do not 501 directly ping, ping from a host behind 501 in subnet 192.168.6.0/24
-
As a transparent (bypass) PIX firewall?
I'm doing a school project that involves the use of a firewall PIX between the ISP and the edge of the network router. The goal is to make the network as secure as possible using only the PIX. Ideally, I'd like that it if an attacker could not even see the PIX was there. It made me think if the PIX can act as a transparent firewall, otherwise said, not having all the IPS assigned to the interfaces nor do no routing, simply inspect/forward traffic between inside/outside interface. Otherwise, I'll have to create a small 30 between the ISP and the PIX from the outside, and the border router and the route PIX inside and between them.
If I do the latter, can you give me advice on how to secure more PIX? Here is my config:
interface ethernet0 10full
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the password encrypted x
passwd encrypted x
pixfirewall hostname
domain pix.local
fixup protocol dns-length maximum 512
No fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 100 permit icmp any any echo response
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP 10.0.0.1 address outside 255.255.255.252
IP address inside 10.0.0.5 255.255.255.252
IP verify reverse path to the outside interface
IP verify reverse path inside interface
IP audit name AttackPolicy attack action alarm down reset
IP audit name InfoPolicy info action alarm down reset
verification of IP outside the InfoPolicy interface
interface IP outside the AttackPolicy check
verification of IP within the InfoPolicy interface
verification of IP within the AttackPolicy interface
disable signing verification IP 2000
disable signing verification IP 2004
don't allow no history of pdm
ARP timeout 14400
NAT (inside) 0 0.0.0.0 0.0.0.0 0 0
Access-group 100 in external interface
Route outside 0.0.0.0 0.0.0.0 10.0.0.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 5
Terminal width 80
Any help is appreciated! Thank you!
Chris
The PIX can now act as a layer 2 firewall, this feature will be in the next major version of the code should be out later this year. For now you will need a small subnet between the ISP and the PIX.
If you do not want to see the PIX then the first thing is to make sure it does not meet the pings. Use the "icmp" command (http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1026574) for. Make sure you allow ICMP unreachable to the outside interface well and Path MTU Discovery can work properly (http://www.cisco.com/warp/public/105/38.shtml#pmtud_fail).
Other than that, it seems very good, pretty standard.
-
PIX 501 restore default settings
I have a Pix with CLI version 6.1 501. I tried the factory default configuration command and it absolutely does not work, it's not even an option when I use the?. Any suggestions, or other ways to restore the factory settings?
Thank you
Joel
Here is an example of the config to reset facrory.
(1.) to connect to the console, the blue cable, 9600/N/1
Activate 2.)
conf t 3)
4.) drag and Drop the config below:
Automatic stop of interface ethernet0
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
pixfirewall hostname
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
pager lines 24
Outside 1500 MTU
Within 1500 MTU
intf2 MTU 1500
No external ip address
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.1.2 - 192.168.1.254 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
sincerely
Patrick
Maybe you are looking for
-
Cannot access the new passpord to the new hotmail account
Hello I have created a new address hotmail and password account - then managed to send emails, disconnected. However, when I went back in this new account (or tried to) it wouldn't accept my new password! I tried several variations but still no luck.
-
on a PDF print mode I can't choose a size won't let me print entire page. the same thing on my cad drawing software
-
I uninstalled the AMD Catalyst Control Center on a 500-027c HP and lost all USB drivers. Given that only the entries USB I can't enter the computer to a previous state. My restore disk is on a flash drive isn't an option, the USB are not active. T
-
I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you
-
CAN GET 'PRINT PREVIEW' BUT THE DOCUMENT WILL NOT PRINT
Unable to print!