Place you RAID0 RAID1 by adding a drive

Similar Questions

• Mounting NFS in a VM vs adding a drive in a NFS data store

  Let's say I have an NFS server to provide storage to a VMware Server

  farm.

  And I just need to put a file on the NFS to a VM server available.

  How can I better performnace.. ?

  (1) Just directly editing this file NFS in the Virtual Machine (using the NFS OS client)

  or

  (2) adding a drive in the Virtual Machine (using a NFS store - mapped on this dossier in the NFS server)

  M.A.

  If you want to use the functionality of VMware snapshot, certainly NFS datastore is your best bet but I think that performance wise, by storing files directly by the NFS client without needing more TCP or i/o load for the virtual disk can give you better performance.

  Management & recovery wise, live sharing the NFS server can make your life very easy for other machines can read or access the files inside without problem but don't forget, sometimes it also can give you headache. While for vmdk, you need tool to access the files inside.

  Just my 2 cents

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• PE T610 - Perc 6i - strange state after adding additional drives

  Hello

  We have a PE T610 with a PERC 6i controller.

  X SATA 1: 2 250 GB virtual disk in a RAID-1

  X SATA 2: 3 500 GB of disk virtual in a RAID-5

  We have added 3 additional 2 TB drives to the server.  A drive has been designated as a Global Hot Spare.  Two other readers have been added to the Bay RAID-5.

  I predicted, using 500 GB each among the readers added two for Virtual Disk 2.  Then, I had planned to use the other 1.5 to among the readers as Virtual Disk 3 in a RAID-1 array.  I did it with other servers in PE in the past.

  But after that the 500 GB is used from each of the discs, I can't used the remaining unused space.  It shows the 'available RAID disk space' as 0.00 GB.

  Why the remaining space on these disks is not available for me to use?

  Thanks for any help on this.

  Bryan Hunt

  «I've waited with 500 GB each among the readers added two for Virtual Disk 2.»  Then, I had planned to use the other 1.5 to among the readers as Virtual Disk 3 in a RAID-1 array.  I did it with other servers in PE in the past. »

  This was allowed on a VERY small number of controllers found in Dell servers.  Anyway, you can do that on 6 PERC.  You can replace your existing 3 drives with 2 TB drives, then create a second table (6 to) on the disks (all disks in a disk group must have the amount of space available and impossible to replace the drives with the greatest and to increase the existing RAID array size).

• You can use an external hard drive with the Mac Mini?

  I've seen videos that say that we cannot increase the ram on a min of Mac, but I'm curious if this works like an ordinary computer, if we can attach an external hard drive to store some of the memory to free up space. Sorry if this is something stupid just need to know what I can do with it.

  You can use an external hard drive to boot and run with any Mac. Its not going to improve or replace your ram. If you use a mechanical hard drive in any Mac then help and boot from an external drive, especially if it's a SSD will be significantly faster.

• Error 0x800704b3 when you try to map a network drive

  Hello

  I have the following error message when you try to map a network drive in my home network:
  "\\iomegahmd cannot be reached" and the error code is 0x800704b3.

  I already looked in the services, and my strong assumption is that the problem is that 'TCP/IP NetBIOS Assistance' service is not statrted and it is disabled. When I try to start it, there is an error message:
  "The system could not find the specified path".

  I also checked the dependency of the 'TCP/IP NetBIOS Assistance' service components:
  Auxiliary function for Winsock driver
  NetBT
  TCP/IP protocol driver
  NetIO-legacy-TDI Support driver
  in the Device Manager is running, but they are all running. Startup is set to 'system '.

  Under the properties of version 4 of TCP/IP Internet of the wireless device, under Advanced-> WINS I ve put enable NetBIOS over TCP/IP, but it helps t is not either.

  What else could try, so that I can map network drives?

  I should also mention, that the problem persists for a few weeks. Before, it was working properly. In addition, on other computers on my network I don't have access to the same network drive problem.

  Thanks in advance,
  Tithe

  > I should also mention that the problem persists for a few weeks. Before, it was working properly.

  It of difficult to say what's wrong in your case. My first idea is: put installation beginning point of time before this error appeared.

  I recommend also to disable all security software and check if you experience the same problem.
  If you still experience the problem, then follow the link to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• HP ENVY Phoenix 810-330qe CTO: adding hard drive for hp envy phoenix 810-330qe

  I bought a 3.5-inch drive, but it seems not to fit.  Can you please tell me what I neet to buy for the size and all the other elements that are required to install a second drive? The SSD that comes with the machine is 2.5 inches, is in a rack and has a cable that plugs into the motherboard.

  Thanks for the help!

  Here is the Manual:

  Manual

  See page 12. You lift the grid car listed on page 13 in the lower right and install a 3.5 inch drive in it. Run the power and SATA data to it and you should have a second hard drive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Error: "Hardware accelerator is disabled or not supported by your video make sure card driver you that you have the latest video card driver installed and the accelerator is running.

  Original title: Solitaire stop working right after the update to download

  This slowed the game.  I checked the video card is correct, and hardware accelerator says it's working properly.  This started after I downloaded two optional updates, one of them KB968930.  I uninstalled both of them and tried to restore the system with no result. the rest of the message is "Hardware accelerator is disabled rooms or not supported by your video make sure card driver that you install the latest video card driver and the accelerator is turned on."  I checked these things.

  Thanks for the help.  I had fixed to date through the tool and the info of the performance.  Find where it says new hardware installed, click on repair, I did and it worked.  I don't know what caused the problem, but my game index had fallen to 1 and came back up to 3.3.  Thanks for the help. P. W. O'Malley

• error ikernelexe when you try to install the multimedia driver

  When you try to install the multimedia driver, I get the following message: "error installing ikernelexe. Using Windows XP. Please notify.
  Thank you

  Hi MarkPfeffer,
   
  This problem may occur if one or more of the following files are missing from the Windows\System32 folder:
  • Stdole32.tlb
  • Stdole2.tlb
  • Stdole.tlb

  Follow the steps listed in the article given to solve this problem:

  Error in Ikernel.exe when you install programs using InstallShield

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• adding hard drive to HP ENVY 700-215xt

  I need to add a secondary hard drive to my 700 215xt.  I see a lot of power connectors, but no cable available data.  Do I have to buy this cable in my car?  Where can I connect it to the motherboard.  I see a couple of possible connectors, a green and a pinkish port.  It's free to connect to any device such as a hard drive or optical drive?

  Hello..

  Here's the sepecifications of your system

  http://support.HP.com/us-en/document/c04094823

  and according to this. You need... and HARD drive

  Hard disk = 1 TB, 7200 RPM, SATA 6 G, 2 TB, 7200 RPM, SATA 6 G or 3 TB, 7200 RPM, SATA 6 G

  Disk cache = mSATA SSD Cache 16 GB

  If you have more then 1 sata connctor with your motherboard, then you can connect... Make sure that you would be close to six sata connctors he...

  I hope that helps!

• "You must format the disk in drive J: before you can use it"

  Says error message "You must format the disk in drive J: before that you can use" I have a removable USB storage drive that I always connected to my computer whenever I have download movies save disk space on my computer.  Now, he wants me to format this disk storage.  Also, where he used to qualify this drive as "Removable disk", it is not labeled as Local J: drive. I don't want to format this drive because it erases all my files and folders on removable USB storage drive.  Please help me.

  I had the same problem.
  And I have a solution for you... The problem is that when you plug in your HD first, Windows 7 install your hard drive and associate it with only this USB port (whether the USB port "4") If you want to use (HD) again, you need to plug it into the same USB port (USB port '4'), where it was first installed. It's stupid! But that's how it worked with my HD.

  Try all USB ports you have on your PC.

  Good luck.

  Hope this has been helpful. : D

  PS: the same problem is with all the damage that connect you to your pc.

• error code 0 X 80070052 when you transfer the pictures from flash drive

  How can you fix error code 0 X 80070052 when you transfer pictures to a flash drive?

  Hi WilliamThomas376,
   
  Here's a similar post on this issue to which I replied. Check if the given solution helping you to solve this problem.
  error code 0 x 80070052

• you want to replace my hard drive?

  Seagate ST1000LM014 1 TB laptop computer Solid State Hybrid Drive MODEL IS COMPATIBLE WITH the DELL INSPIRON 15R 5521 OR NOT?

  Hi, Mr. Kumar,

  Yes, this drive should work. Keep in mind, it's a hybrid drive, NOT an SSD. If that's what you're looking for, the Seagate drive should be good.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Acrobat Pro XI and that you do not have a pdf driver

  Hello - I have Acrobat Pro XI and that you do not have a pdf driver

  FWIW - you have posted on the forum of "Adobe Reader".

  This means that you are using Adobe Reader (free to download, free to install, free to use the app).

  If this is the case, then no, there no virtual printer Adobe PDF with Adobe Reader.

  If it is used Acrobat (the I have to pay to play app) then try a "repair".

  If it's a need to troubleshoot PDFMaker visit:

  The problems of Acrobat PDFMaker. Office | Windows

  Thus, for Acrobat visit the user forums at:
  https://forums.Adobe.com/community/Acrobat

  Be well