Similar Questions

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

  At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

  > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
  > the motherboard is the culprit

  Therefore, the diagnostic test is necessary.
  A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

  I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

• Device Intel WLan 6230 USB not recognized in Satellite L655 running Win8

  I installed the Intel Centrino card 6230 WLAN for laptop Toshiba Satellite L655 of my wife (introduced to my HP laptop, but due to their allow list, it does not start... but it's another story).

  Wifi works a treat, and I'm pulling in a little more speed of 100 mb/s (http://www.speedtest.net/result/2328501761.png) to connect to my router dual band 5 GHz.

  I understand this card features also the Bluetooth capabilities and I think that is where my problem comes from.

  I get a warning balloon will appear in the system tray saying "Device not recognized USB" (http://imageshack.us/f/208/intel62301.jpg/).

  I followed various supposed fixes, including the removal of the drivers, as you can see from the photo I've already done. As I'm under Windows 8 Pro 64 bit as soon as I restart the WLAN driver is automatically re-established.

  I tried to install the drivers several times, but I always get the error message as below: -.

  http://ImageShack.us/f/41/intel62302.jpg/
  http://ImageShack.us/f/822/intel62303.jpg/

  I'm looking for one of the 2 solutions.

  1. get the device working properly - Bluetooth & Wifi - there Toshiba never do drivers for the 6230?
  2 disable the ToolTip of the USB, I can do this as a stop, but as soon as I reboot it is back bothers me!

  Any help is appreciated with gratitude.

  Hello

  I m bit confused.
  Your problem is the message: saying 'USB device not recognized '.
  Right?

  Why do you as his associates to the new wireless network card?
  I checked the screenshot you posted above and card WLan (Intel Centrino Advanced N 6230) appears in Device Manager then its recognized by Win 8, thus

  On BT taken in charge by the Intel card.
  I found this software Intel® PROSet/Wireless Bluetooth for Windows 7
  TM http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21713&Keyword=Bluet & lang = fra
  Normally it should work with Win 8 too.
  Maybe what you are looking for.

• USB device not recognized when connecting to printer

  Hello Microsoft,

  Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

  Hello Dhruv,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the complete model of your printer RICOH SP 100 number?

  Thank you for details on the issue.

  This problem may occur because of settings and corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Please also run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Controllers USB reinstall and check the issue. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  (b) in Device Manager, expand 'USB Bus controllers'.

  c. right-click any device under "Controllers of Bus USB" and click Uninstall.

  d. repeat the same steps for other devices.

  e. Once completed, restart the computer.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Email address is not recognized.

  Original title: * e-mail address is removed from the privacy *.

  I used this email address for years now I no longer use Outlook. I use FB, Google +, no matter what, all of a sudden this e-mail address is no longer recognized. I can't go back to more than 100 emails I need to do & it's the address linked to my FB. Help. Where can I retrieve it?

  Wonderful. I'm not computer enough to know where a response will appear if I take a select one. If I choose Windows it will appear in my homepage?  I opened Internet explorer, hope I get an answer here.  It is updated to Windows 7 Pro.

  Hi Sasha,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it seems that you have problems with an email that is not recognized.

  However, we need more information on this topic to help you best.

  Please help me to answer these questions.

  1. what email provider do you use?

  2. that you get an error?

  3. If so, what is the error exact\complete?

  Provide us the details so that we can provide a better solution.

• exit paths are not recognized as the old AE file

  Hello

  I'm on EI CC2015 (13.6). Now, I wonder to change an old AE in AE 11 file.

  It is part of a production pipeline where we have more than 100 comps to specific paths.

  The problem is that the output path is not recognized. After he set the path of the correct output manually, I note a difference in scoring.

  Is it possible to correct the output paths automatically? Because it would take a lot of time to do it manually.

  

  Thank you!

  Floris

  OK, I fixed it creating this script. If someone always faces the same problem:

  {

  Change rendering Locations.jsx

  //

  This script asks the user a new output folder to use for pending items in the render queue.

  function ChangeRenderLocations()

  {

  scriptName var = "correct the output path";

  var URL is Folder.selectDialog ("select a rendered output file...");.

  app.beginUndoGroup (scriptName);

  Treat all make them elements of the queue whose state is set to Queued.

  for (i = 1; i<= app.project.renderqueue.numitems;="" ++i)="">

  var curItem = app.project.renderQueue.item (i);

  If (curItem.status == RQItemStatus.QUEUED) {}

  Change all the output modules for the current rendering queue item.

  for (j = 1; j<= curitem.numoutputmodules;="" ++j)="">

  var curOM = curItem.outputModule (j);

  var oldLocation = curOM.file;

  var path = oldLocation.toString ();

  var fileName = oldLocation.name.toString ();

  var pathEnd = path.length - fileName.length-2;

  var URL = path.substr(0,pathEnd);

  curOM.file = new File (Newlocation'the);

  }

  }

  app.endUndoGroup ();

  }

  }

  ChangeRenderLocations();

  }

• ORA-01821: date format not recognized

  Hi all
  
  Can you help me debug this error please. It drives me crazy :(
  
  
  update inventory set decomission_date = August 19, 11 ' where ID = 100;
  *
  ERROR on line 1:
  ORA-01821: date format not recognized
  ORA-06512: at "SC. AUDIT_PKG", line 29
  ORA-06512: at "SC. AUD_INVENTORY", line 39
  ORA-04088: error during execution of trigger 'SC. AUD_INVENTORY'
  
  
  ORA-06512: at "SC. AUDIT_PKG", line 29 is:
  

          insert into audit_tbl values
          ( sysdate, nvl( v( 'app_user' ), user ), upper(l_tname), upper(l_cname),
            to_char( l_old, 'dd-mon-yyyy hh24:mi:ss' ),
            to_char( l_new, 'dd-mon-yyyy hh23:mi:ss' ), l_id );

  SQL> desc audit_tbl
   Name                                      Null?    Type
   ----------------------------------------- -------- ---------------
  
   TIMESTAMP                                          DATE
   WHO                                                VARCHAR2(30)
   TNAME                                              VARCHAR2(30)
   CNAME                                              VARCHAR2(30)
   OLD                                                VARCHAR2(2000)
   NEW                                                VARCHAR2(2000)
   ID                                                 NUMBER

  ORA-06512: at "SC. AUD_MDC_INVENTORY", line 39 is:
  

   audit_pkg.check_val( 'INVENTORY', 'DECOMISSION_DATE', :new.DECOMISSION_DATE, :old.DECOMISSION_DATE, :old.id );

  What are the causes the incorrect date format pleaseeeeeeeeee...
  
  
  Thank you very much.

  TO_CHAR (l_new, 'hh23:mi:ss of mon-dd-yyyy'), l_id);

  Looks like a simple typo - code a CM23 instead of HH24!

• iTunes not recognizing iphone

  Hey guys, last updated itunes is not recognizing my iphone.

  Uninstalled and reinstalled iTunes several times, everything is up to date. I also tried the thing of driver device manager update, but the apple usb driver is not present even after I have reinstall and uninstall iTunes, all solutions? p.s Also running windows 10.

  Hello, you should see this article, it will help you If iTunes does not your iPad, iPhone or iPod - Apple Support

• My IPhone 6 is not recognized by my IMac

  My IPhone 6 is not recognized by my IMac

  What operating system do you use? If you mean that it is not recognized by iTunes and you use 10.7 as your profile is displayed, you will need to upgrade your operating system to get the latest version of iTunes.

• Logitech C310 Webcam not recognized

  I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

  Anyone else have a similar problem with a Logitech webcam that faces a problem?

  Contact Logitech technical support. The camera may be incompatible.

• Updated itunes 12.5.1 and iPhone not recognized now

  I upgraded to itunes 12.5.1 and now my itunes does not recognize my iphone when it's connected.  I have a new laptop with Windows 10.  Can anyone help please?  I want to save my phone before I upgarde to the new iphone 10.0 software.  Thank you!

  Hey cbaron12,

  Thank you for being a part of the communities of Apple Support.

  I understand that your iPhone is not recognized in iTunes on your Windows PC.  It of a good idea to always backup your iPhone, so in order to get this problem solved, please follow the steps in the link below.

  If iTunes does not recognize your iPhone, iPad, or iPod

  See you soon.

• iPhone, iPad Air 2 not recognized by iTunes

  Very frustrated right now. Given that Apple's Support is not in contact with return despite requests, the story will go here. I have Windows 10, iPhone 6 + and iPad Air 2. Last weekend I was invited to and did pass to iTunes 12.5.1.21. Plugged my iPhone 6 +. Not recognized by iTunes; 'sync' gray. Tried the same thing with my iPad 2 Air. Same result. I get no error message.  Here are my troubleshooting - what I'm missing, Apple?

  1. Lightning card Checked, works fine with other devices.
  2. Rebooted PC.
  3. Rebooted IPhone.
  4. Restarted iPad Air 2.
  5. I've tried different start up sequences (start iTunes connect manually; first)
  6. Went to 'Upgrade device via Device Manager' - these devices are working properly.
  7. Updated my iPhone and iPad 2 air for iOS 10 successfully.
  8. Apple email support; 48 hours later they gave me another email address for contact.
  9. Chose the Contact Apple Support via phone option - screen "we will call you - your phone will ring at any time.  Still waiting for the phone to ring.
  10. From Discussions on Apple's site with troubleshooting tips, have tried all suggestions with no luck - If iTunes does not recognize your iPhone, iPad or iPod - Apple Support.
  11. I even opened and closed the blinds completely throughout my house to see if that would help.  Go figure.
  12. The last resort on them, says "Contact Apple support" - see #9 above.  Twice.

  Apple-Support - What should I do at this point?  I'm all ears, and Android is looking better and better during my next upgrade.

  Happy to report that I finally found a position that has fixed this. Someone has to give Community contributor turingtest2 a price, they had an incredible post in communities that have corrected my problem.  See below for the excellent suggestions.

  iOS device do not show in iTunes for Windows

  iOS device do not show in iTunes for Windows

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2