Play a movie on my DVD player?

Similar Questions

• Conversion of project movie maker Windows DVD player

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  ========================================
  Yes... and since you post in the XP forum... you
  must run XP with Movie Maker 2.1?

  OK, you need to save your project in .avi or .wmv
  film format. Then you need DVD Aurhoring software for
  create a video DVD. The software free DVD Flick can do...
  (How to record in .wmv or .avi... pasted below)

  DVD Flick
  http://sourceforge.NET/projects/dvdflick/

  (the file you need to download and install is:)
  "dvdflick_setup_1.3.0.7.exe")

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Here are some basic instructions:

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.
   
  Finally... Here's how to Save Movie Maker:

  To save in a .wmv movie file...
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a .avi movie file...
  (and other options)
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot display dvd slideshow created in movie maker on dvd player

  Problem with Windows Live Movie Maker

  Why can't I see a video slide show created in Windows Live Movie Maker on my TV via the dvd player when it works perfectly fine on my computer?  Dvd player says there no audio or video data on the disc DVD-R with the other player saying he is a damaged drive.

  Thanks for the info...

  No guarantee... but I suggest you use the
  suite of freeware to burn your DVD... you can have one
  best result.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest)

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Get a fixed image and audio while playing a movie in Windows Media Player, also get the message: "network is too busy to read the file to its original quality.

  Original title: Windows Media Player

  When I go to play a movie using windows MediaPlayer all I get is an imagwe again with audio and this message 'network is too busy to read the file to its original quality. Also, all my other media playing programs read the video but are rather "lag". I think the problem is that I already used a program to download torrents called 'BitTorent' and maybe this has used up all my bandwidth or processing speed? Not really sure but would really like it if I could still use WMP and I'm looking for resolution to my problem?

  Thank you

  Hi Jeremy,.

  It seems that you have problems with playback of video files in Windows Media Player.

  1. what operating system do you use?
  2. this happens with all the videos?

  If you use Windows 7, here are a few troubleshooting steps that you can try.

  Method 1: Try to run the troubleshooting Windows Media Player settings Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: If the problem persists, try to disable and enable Media Player and check.

  Step 1: turn off Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.
   
  Step 2: Enable the Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 3: Try to re register the wmp.dll file and check if it helps.

  a. log on as an administrator.
  b. click Start, type cmd in the text box Search , right-click on cmd.exe, click run as administratorand then click continue.
  c. at the command prompt, type regsvr32 wmp.dll, and then click OK.

  I hope this helps!

• will be ntsc dvd play on pavilion g6 1325 dvd player in windows media player

  United States will import ntsc play DVDs on a DVD pavilion g6 1325?

  Hello

  Yes BUT the formats (PAL, NTSC...) is not our main problem, the problem is the areas of DVDs (or regions). Almost all DVD players on computers will allow 5 changes of area , it crashes with the fifth. My suggetsion, player to buy a DVD for $70 and it will play everything, any area/region locked. More information:

  http://en.Wikipedia.org/wiki/DVD_region_code

  http://DVD-player-software-review.TopTenReviews.com/what-is-DVD-region-lock.html

  Kind regards.

• Mac Book stop with the movie in the dvd player, and now it opens in the reset password screen?

  I'm running OS X El Capitan 10.11.5 and my daughter and her friends used to watch a movie last night and stop it before releasing the film. My Mac Book Pro is the start of the password reset screen/mode? It gives me only 3 options, none of which is true. (1) I forgot my password. (2) my password does not work when you connect 3) my keyboard does not work when you type my password to connect? When I opened the Apple on lft albums he gives me a boot disc, restart and turn off? I tried all the options and it restarts just on the same page? Someone at - it advice? Thanks in advance!

  The appearance of the password reset screen indicates FileVault2 is enabled on your MBP. Fix?

  If so, that'll probably get you out this Pickle: https://derflounder.wordpress.com/2015/01/17/yosemites-filevault-2-pre-boot-reco very-options /

• Satellite Pro A300D - cannot play movies on a Toshiba DVD player

  Hi guys,.

  When I play movies in Toshiba DVD player I get the following error message: "unable to output the video to an external device. Please check the external output setting after the end of the application. TEMPRO, I installed and tried to install all updates - some of them were for different hardware so wouldn't install.

  I get a similar problem in Windows Media Player "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card. VLC player works fine. The drive otherwise normally functioning.

  It's the same problem, as described in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=201029&tstart=0, but all the answers are a similar problem with HD DVD on a different model (P200).

  Anyone know how I can fix this problem? I'm not sure I can be bothered to go back and reinstall Vista etc...

  Thank you
  Alex

  Hey Buddy,

  According to the Toshiba DVD Player error message: are you trying to watch DVDs on an external monitor or TV?
  In your case, I will try to reinstall the DVD playback software. This means delete the current version and then restart your computer. Then download and install the latest software from Toshiba DVD player.

  But to be honest: it's that everything works with VLC media player as it s very big and small media player that can play all audio and video files. Isn t it? ;)

• When I put a movie on a cd it will not play on my dvd player

  When I did a movie using windows movie maker, when it comes to play on my dvd player it will not work?

  Since you have posted in a forum XP... I assume you are using XP?

  You create to play in a free-standing DVD player...
  a video DVD instead of a CD. (, You'll need a DVD burner,
  a DVD creation software and DVDs)

  If your Movie Maker project is saved in the. Film WMV format...
  Maybe one of the following freeware programs will help you
  create a video DVD.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  AVStoDVD
  http://www.videohelp.com/tools/AVSTODVD
  (the download is: "AVStoDVD_242_Install.exe")
  (Download from (direct link) is the fastest).

• Movie Maker. Why it wont play on DVD player?

  I just did a picture / audio in Movie Maker. I want to play on a normal DVD player. How can I do this? I tried to burn to the CD - R and DVD-R. Both will only play on computer.

  Using Win XP?

  The only version of Win XP Movie Maker the option offer
  to burn a DVD-video is the "Media Center Edition 2005".

  To create a video DVD which will play in a free-standing DVD player...
  First, you must save your Movie Maker project in the. WMV or. DV - AVI
  format and then import the file into the DVD Authoring software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Perhaps the following freeware will help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

• CD will not play using a DVD player

  Director of Windows

  After a musical slide show on cd it will play fine on my pc, however I cann t he can read on my dvd / tv player. I use Fuji-r discs.

  When you use the same disks to record music only files I have no trouble to play them on my dvd/tv

  IAM a PAO and starting with the PC and would like to receive no assistance. Roy

  After a musical slide show on cd it will play fine on my pc, however I cann t he can read on my dvd / tv player. I use Fuji-r discs.

  When you use the same disks to record music only files I have no trouble to play them on my dvd/tv

  IAM a PAO and starting with the PC and would like to receive no assistance. Roy

  ========================================
  If you want your CD with video to play on a free-standing DVD
  Player, you will need to create a VCD (Video CD)... This requires
  Special software. (and not all DVD players will recognize a VCD...)
  Check your manual DVD player for compatibility).

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Qosmio G30 - E10: no reading DVD with "Toshiba HD DVD Player.

  Hi all

  If I try to play a normal DVD (not a HD-DVD) with the Toshiba HD-DVD player software, I get the message next to the HD-DVD player:

  "This player has no DVD Playbackfunction. Please try an appropriate for the DVD playback application.

  HD-DVD drive's current firmware. HD-DVD's on current patchlevel 4.20.16.
  DVD with InterVideo WinDVD playback works fine!

  Laptop is a Qosmio G30 - E10, with Vista Ultimate (factory standard).
  Any ideas?

  Thanks in advance.

  Sincerely
  Uwe

  Hello

  Did you ever ask yourself why Toshiba install two players on this laptop HD-DVD? Probably not.
  With short words: HD-DVD player is designed for playback of HD-DVD only movies. To watch regular DVD movies with a DVD player. For this application use WinDVD player.

  Goodbye and enjoy your great laptop Qosmio.

• Burning DVDs in DVD player not working not

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  ============================================
  Burn a video DVD that will play in a free-standing DVD player you
  need software for DVD creation... the only version of Windows XP that
  included this option was the "Windows XP Media Center Edition 2005.

  See the following article:

  Movie Maker 2 and DVD burning software-
  Media Center 2005 Edition
  http://www.Papajohn.org/mm2-DVD-MCE.html

  Perhaps the following freeware should help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows 7 - with Movie Maker. How can I burn and finalize a movie on a dvd disc?

  I can not play the movie on my computer.

  He saved a MP4 on my hard drive - it wont; open for Windows Media, Quicktime - or one of several other mp4 players I downloaded (and uninstall)

  I chose the option "burn to disc" - thinking naively that it would actually burn something I could put on a dvd player and play.

  First of all - why not? Why I have this burn to a disc if it won't; Open or play on any computer or dvd player?

  Many of the forums say the option 'Choose the Mastering' and don't forget to finalize the disc.

  I can find no options of Mastering Windows Movie Maker 7 - and how I finalize with no obvious way to do it?

  I need this video slideshow for work - and I was home for days.

  What should I do to find themselves with a video slideshow mastered on a dvd disc that will play on any dvd player...?

  Thank you

  I can not play the movie on my computer.

  He saved a MP4 on my hard drive - it wont; open for Windows Media, Quicktime - or one of several other mp4 players I downloaded (and uninstall)

  I chose the option "burn to disc" - thinking naively that it would actually burn something I could put on a dvd player and play.

  First of all - why not? Why I have this burn to a disc if it won't; Open or play on any computer or dvd player?

  Many of the forums say the option 'Choose the Mastering' and don't forget to finalize the disc.

  I can find no options of Mastering Windows Movie Maker 7 - and how I finalize with no obvious way to do it?

  I need this video slideshow for work - and I was home for days.

  What should I do to find themselves with a video slideshow mastered on a dvd disc that will play on any dvd player...?

  Thank you

  =================================
  The following freeware can burn a video DVD very easily:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

• DVD player won't play a movie made with movie maker

  I downloaded the movie maker and made the movie to mpeg and jpg saved on my computer to my Sony cybershot camera. He burned first to a DVD-R and nothing. So I saved a copy on my computer then burn a copy on a CD - R. Now, when I put the CD or the DVD-R in my Portable DVD player it must play fair? No, it's the 'bad disk '. When I put in another DVD player attached to my TV they return "not found no file supported" for CD - R and the 'bad disc' on the DVD-R. So neither my old portable DVD player or most recent DVD drive attached to the TV will play one of them.  I know the movies is on their as when I stick to the computer, Windows Media Player plays automatically. Even with the DVD-R. So, this is the DVD drive laptop who can not read or what I am doing wrong?

  What you were doing only works if you play the CD or DVD on the SAME computer that the movie has been created.

  It will NOT pay in another computer, it won't play in any DVD player.

  What you need is to burn pictures on a DVD Maker, not a "movie maker".

  Issues related to the:

  1. what type of operating system are you using?

  2. in addition to the #1 question... Why did you have to 'download' a movie maker?

  3. If you want to burn a DVD movie (not), you'll need a DVD Maker, not a Movie Maker.

  What you had described, the DVD movie you will play only on the same computer that created the film.

  He will not play in another computer.
  He won't play in any DVD player.

  For your information...

  Vista has Windows Movie Maker included.  Creating Windows DVD is only available for Vista Ultimate and Vista Home Premium.

  Windows 7 should install Windows Live Essentials, which provides programs of your choice, i.e. Windows live Movie Maker and Windows Live DVD Maker, among others.

• How can I burn a movie on windows movie maker to a cs that will play on my dvd player. It will only play on my computer

  I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

  I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

  =======================================
  Try to import the saved. In Windows WMV video file
  Creation of DVD and burn a DVD-video:

  Windows Vista - burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc