Burning DVDs in DVD player not working not

Similar Questions

• DVD player not working not not since upgrading to Windows 10?

  Improved to win 10 of Win 7 and now cannot get my DVD player to work. Checked info from Device Manager which advises (Windows cannot start this hardware device because its configuration in the registry information is incomplete or damaged (code 19).) I tried to remove and reinstall the DVD player, but the error message still appears. Any ideas of how to solve my problem?
  My last resort would be to roll back to Windows 7 if I can't figure it out. : confused:

  I have the same problem with my SATELLITE A500 - 19(d) is code19 drivers must not be installed correctly.

• DVD player not working not not with win 8.1

  Hello. I have the HP pavilion 15-e020TU laptop. My DVD player has worked with windows 7 and windows 8. After the upgrade to windows 8.1, the DVD player does not work. The Windows Device Manager find the DVD player, but represents a brand yellow error. I chose "update driver software" and then "automatically search for updates of driver software". Then the name changed from 'Mitsumi CD drive' to 'hp DVD A DU8A5SH'. And still does not. I installed the update of the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt displays "error: no readers mitsumi found.» What can I do now?

  Hello:

  Try each of the steps in resolution 2, 3, 4 & 5 on the link below.

  One of them normally solves the problem.

  http://support.Microsoft.com/kb/314060

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• DVD player not working not not on Satellite Pro U400-142

  My DVD player does not work. I insert a disc, you can hear the drive works for some time, but then nothing happens. I checked the Device Manager' - under readers of CD-ROM/DVD-ROM it shows: MAST * A DVD-RAM UJ862AS, but there is a black exclamation point in a yellow circle next to it. I opened the dialog box 'Properties' and under the status of the device, he wrote:

  "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I would try try to resolve the problem by reinstalling the driver. I checked Toshiba site for the driver, but can't find it.

  I would be very grateful if someone could give me some ideas on how to sove this problem.

  Thank you

  P

  What you can do is follow:
  Remove the optical drive from Device Manager drive, restart your laptop.
  The reader should be acknowledged and properly installed. If the same thing happens again try it please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• DVD player not working not not Satellite Pro A100 - Code 37 error

  Hello

  Someone help on this?

  I have an A-100 and the DVD player has stopped working in XP. I checked the Device Manager and see XP disc but returns this error "Windows cannot initialize the device of this hardware driver. (Code 37) »

  I also noticed that ASAPI.sys is not running in the Task Manager.

  I'm guessing this has something to do with the problem.

  I tried to reinstall the device drivers, but this made no difference. Any suggestions?

  Hello

  Error code 37 means the driver returned failure from its DriverEntry routine.
  You can try to delete the driver from Device Manager and rebooted the new OS should recognize the drive device and initialize the driver again.

  If this is not enough, try this procedure:
  Run REGEDIT and open the following folders:

  HKEY_LOCAL_MACHINE
  -> SYSTEM
  -> CurrentControlSet
  -> Control
  -> Class
  {4D36E965-E325-11CE-BFC1-08002BE10318}

  After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
  "Upperfilters".
  'Lowerfilters '.

  Click on each of them, press DELETE, and then click YES.

  Then restart the laptop and see if it was useful.

• DVD player not working not not on Sat 1800-614

  Hello

  I bought a Satellite 1800 614 3 years ago, provided with a DVD player. At this time there is no problem to read the DVD. I did not use it for a while and when I tried to use it I discovered that it does not read new DVD, I can see the movie but the two images and audios are dispersed and disrupted last year. It only works with the old DVD (2001-2002) and DVX and so on...

  I was told that it is because they changed the format of DVD or something like that. Can you help me to fix it? Is it possible to update the BIOS any help? Maybe the firmware? You know the one that I need and where I can find it? I tried to update the drivers for DVD but it seems that he does not accept the change. Do you know how to update the drivers too?

  THANKS TO ANYONE WHO CAN HELP! I HAD THIS DVD PLAYER AND I NEVER GOT TO USE IT!

  Hello

  I put t know if you tried, but you can try to install some beyond news who is responsible for playing movies on dvd (files)

• Burned DVD will not play on a DVD player

  I downloaded a 22 minute video I want to burn to a DVD in my DVD player.  I tried on the DVD-R and DVD + R.  They burn the disk but will not play on the DVD player.  The error message indicates that the reading is not available on this disc.  I used the windows search support to problem solve on my own, but have had no success.  I made sure that I am selecting the option of CD/DVD drive to use the ISO image format.  I entered my option and I have no filters.  I have the video on NTSC format since I'm Pennsylvania / U.S..  I have not tried burning on slow or average speed because it burns the DVD without problem it just will not playback on the DVD player.  What do you recommend as my next plan of action for troubleshooting.

  I guess that the video is not DVD compatible Mpeg2.  According to the DVD player, some will play other formats, too.  If there is no program for video on the computer, try Windows Movie Maker (free) to see if the video will too be converted to standard DVD Mpeg2.

• DVD player not working not properly

  my DVD player worked... then all of a sudden one day, it did not show the DVD I insert... and I have tried others... the same result came... when I try to open the drive d, it says please insert a DVD, but I have all ready insert a... I tried to update and it says the new update have all ready installed... Please if anyone knows how to solve this problem... send me an answer as soon as POSSIBLE... Thank you

  Hello

  I suggest to try this patch and see if that helps:

  http://www.kapilarya.com/Windows-8-not-showing-DVD-drive

  I hope this helps. Good luck :)

• Y510P dvd player not working not not after update Win 10

  Just realized that my dvd drive does not read DVD because I upgraded to win 10. He does not even recognize DVD, me showing only a file desktop.ini instead. It plays CDs fine and it burns DVD as peripheral storage, but it * may * be only burn as a CD, have not really tested.

  I would get a updated driver from lenovo, but I can't the Q & A session, he does not know my laptop or I am under win 7 or 8.1.

  Any help would be appreciated.

  Thank you

  Mike

  uninstalled the driver and restarted... problem solved

• Dell Inspirson 546 s burned DVD will not play, error 'error code 740 failure of process of creation ".

  code 740 burn movie but will not play on player please help

  I have a Dell Inspirson 546 s I burned movies much but for a reason, it will still burn, but will not play on a standalone dvd player but I'm working on my computer please help me. For I have not understand the computer. When it's getting burn the creation of said process has no error 740 code.

  You are posting in the wrong Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD player not recognized; error code 10

  Our Museum has a Dell Optiplex 745 on which the XP operating system has been replaced by Windows 7 Professional.  The DVD drive is not recognized, and the error code 10 stipulates that the driver could not be loaded.  I tried upgrading the driver online, but I was told that the driver installed is the right one for this player.  If I remove the drive with the machine on, uninstall the driver, stop and then restart and then restarting to reinsert the DVD, the computer recognizes the drive and install it and it works.  When you restart the computer the next morning, the car disappeared again.  Would appreciate any help I can get!

  Thank you!

  Werner Horlbeck

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DVD player not recognized by the computer

  Have x 2 divided windows 8.1.  Have loaded the software for LG Super Multi blade DVD player.  No AutoPlay.  Work on another computer.

  Hello Arnoldj,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with your optical drive not auto playback you discs in point 8.1 of Windows. Although it is not a Windows 8.1, but a document of Windows 8 steps will be the same, and I think is where we should start. Please visit the HP support document: HP PCs - impossible drive reading discs (Windows 8), to focus on the problem you are experiencing.

  If you still need additional help feel free to re-post. Thanks for posting on the HP Forums. Have a great day!

• I need a update for my HP DVD player &amp; not rely on Microsoft

  I have a problem with HP DVD & I tend to disagree if is saying that my DVD drive (HP DVD RW AD - 7586H) must be replaced. My dvd player works when he wants (has a clean spirit). The last update for my DVD drive is 21/06/2006 (7 years and enjoyed passing updated driver). Ive uninstalled my DVD drive & reinstalled after startup & has nothing there is never, ever a update for my via DriverBooster, DriverScanner or my in-kind Assistant from HP DVD drive & I used a certain programs to update my driver (Driverbooster, DriverScanner etc.). NEVER. If HP can give me a BIOS update, why not send me a DVD Player update through me HP Support Assistant HP?  Well, I think this is a time of combat that HP should create an update to solve all the problems of DVD rather than depend on Microsoft to fix it. If my DVD drive was well Windows I would use the microsoft Fixits, but since it is a HP DVD drive, I think HP should solve the problem, not Microsoft.

  What you see in the Device Manager is the driver control for the dvd player, what are you really need to look at is the version of the firmware on your dvd player & see if a newer firmware is available.

  Usually many even intermittent faults are more material than firmware, readers are very cheap but & can access a job of 2 minutes to replace if necessary more you a better quality disc & spec as you wish.

  I think KH21 is new firmware for this dvd player.

• Windows Media its DVD Player-not

  My audio Windows Media DVD player does not work.  The audio and the FM plays well.  Can help you with a solution of his DVD.

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/projects/AC3Filter/releases
  (tests - AC3Filter 1.63 full b)

  Good luck...