Playback Choppy/stuttering using airplay

Similar Questions

• Solution for DVD playback choppy on Satellite Pro A100

  Hello!

  I had this problem twice on my Toshiba laptop (Satellite Pro A100 bought in April 2006): the DVD used to play very well, but now (perhaps after an update of the driver or installation of software, I not sure what causes this) DVD playback is choppy, distorted sound. This occurs throughout all media players on Windows XP (for example, PowerDVD which came with the laptop) or Windows media player.

  I searched the internet far from a solution and finally found how to solve this problem:

  Go to Device Manager, select the "IDE ATA/ATAPI controllers" section, and then select the "second IDE channel", right click and 'uninstall '. (There are two second IDE channels, if you know which then just uninstall both.) Restart Windows XP, Windows XP will automatically reinstall the drivers without the need to download anything. Subsequently the DVD Player reads normally.

  The symptoms of the problem, apart from DVD playback choppy, are the "transfer mode" gets stuck on PIO for a reason, and bring back to DMA with no opportunity to spend. I have no idea what software or driver causes this, or why, but if this is your problem too, if you think that this solves.

  Cool, thanks for the inquiry and the nice information.
  Could be useful to others here in the forum.
  Nice to have these community users :)

• HD streams using AirPlay does not work

  Hello

  For the last year I have spread my ipad on my apple 3rd tv HD content generation and everything is fine.

  I recently bought apple tv 4th generation and now I can't stream the HD content, only the SD content.

  When I try to broadcast HD to the apple TV 4 channel, the picture of freezes after a few seconds and only the audio continues.

  Even HD content still works fine on apple tv 3, but not on 4.

  No idea why this is happening and how to fix it?

  Thank you!

  Hello. I assume you are using AirPlay of base (not mirroring) to stream content from a Web server. The new ATV 4 there exactly the same internet connection as ATV 3? In particular, it uses the same RAM DNS, VPN, etc. ?

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

• Subtitles not streaming on Apple TV when you use airplay

  So, when I watch videos/movies with subtitles on my iPad, all right. But as soon as I use the function airplay, the video and audio come up on my screen TV perfectly, but the subtitles do not display on the screen like how they do normally on my iPad. Does anyone know the solution to this? I turned on subtitles by going to settings > general > accessibility, but that did nothing. I also held select down, but the message I got was 'the subtitles are not available for that content. Why am I able to see the subtitles when you look at the iPad, normally, but not when you use airplay?

  You use AirPlay base or put you in the mirror.

• I have a macmini (mid-2010). Is it possible that I can use Airplay with her to my newly purchased Apple TV?

  I have a macmini (mid-2010). Is it possible that I can use Airplay with her to my newly purchased Apple TV?

  Mini Mac must be 2011 or later to use AirPlay > Use AirPlay to display video from your Mac to a HD TV

• Use AirPlay between my IPad and Apple TV, I have audio but no visual

  Use AirPlay between my IPad and Apple TV, I have audio but no visual. How can I get the picture, but also the sounds?

  Not all applications are enabled for AirPlay, it's the developer to

• What should I do to use my hdtv as a second display for my macbook pro using airplay.

  Hey guys,.

  I was just trying to understand how to use my tv as a second monitor to run different applications on fullscreen, as an application on my mac and the other on the TV.

  I tried to 'use as a separate display option' of the airplay button, it doesn't seem to help.

  Appreciate if someone could help me with that.

  > for example,.

  I want to facetime runs in full screen mode on my apple tv, at the same time, I use pages, however I don't want pages is displayed on my tv screen.

  I know its possible, but I don't know how I have to happen.

  When you use AirPlay to Apple TV, open system-> Display Preferences. Clear the option to mirror the views.

• How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic.

  How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic. What I want to do is; Once playback is stopped the playhead returns to the previous starting position. Where is the setting for this? Is it still an option that I can find nothing in the online help.

  Hi there, don't you mean this one?

  

  Good day!

• Playback - audio stuttering, lag, drop-off

  Hey guys, sorry for the long spam of which is downstairs, but it really drives me crazy, and I want to remedy. Any help would be appreciated. I've included all the information that would be necessary and I am very competent with computers (programming, technology, etc.)

  Questions:

  (1) reading in the overview section is stuttery after awhile, and audio out *.

  (2) adding video files causes the complete user interface to hang in Explorer.exe and Premiere Pro window *.

  * Present in all projects

  Temporary solution:

  (1) where the resolution of the reading is 1/2, to order in full, waiting for the resolution of the image in pause increase allows the video to play gently for a few seconds

  (2) none found

  System Specs:

  1 x 250 GB 840 Evo SSD <-where first is installed

  1 x 3 TB WD Green Drive <-where are stored the clips

  1 x 1 TB Seagate 64 MB Cache 7200 RPM disk <-unused, but no change in performance when used

  Video clips:

  80 GB, 160 GB, H264, 30 fps, saved with OBS 450000 max bitrate value

  System Specs:

  i5 4440 w / cooling stock

  16 GB of RAM - 1600 MHz

  Card mother B85-more

  GTX 970 Strix Gaming

  Windows 64 bit 8.1 <-a was installed as 8.1 on the Assembly of the computer

  -SETTINGS ADOBE-

  Project settings: Mercury Playback Engine GPU acceleration

  Video display format - Timecode

  Audio display format - Audio samples

  Capture HDV - Format

  MEDIA

  _____________________

  Media Cache files: save media cache files next to the originals when possible - disabled

  Location is on the 1 TB drive - %appdata%\Roaming\Adobe\Common

  Media cache database:

  Location is located on %appdata%\Roaming\Adobe\Common drive 1 TB

  Media for a period indeterminate Timebase - compensated image 29.97 FPS

  Timecode: use a media Source

  Number of images: start at 0

  Write ID XMP files when importing - disabled

  Write the clip markers to XMP - verified

  Active clip and controlled linking - XMP metadata

  Include captions on Import - verified

  The files more

  Automatically refresh files - audited more

  Refresh seconds more files Every [60]

  MEMORY

  __________________

  Installed RAM: 15.9 GB

  For other applications of RAM: 4 GB

  Rendering optimized for [Performance]

  READING

  ____________

  Preroll seconds [3]

  Second Postroll [2]

  Step backward/number of seconds [5]

  Activate the issuance of mercury - verified

  Audio device [Adobe DV]

  -OPEN DIFFUSER SOFTWARE SETTINGS-

  Encoding

  ______________

  Video encoding:

  Encoder [x 264]

  Use CBR - verified

  Enable the padding of CBR - verified

  Flow rate Max (KB/s) [450000]

  Audio encoding:

  Codec [AAFC]

  Bitrate [320]

  Format [48 kHz]

  Channel [stereo]

  Version of the driver NVIDIA - 347.09

  Objective:

  Blocking interface cure when you add files/changes of clips

  Smooth to prevent playback audio and video, choppy playback / gal (drops to 0.5 ips)

  I can save it if you want, but it will take some time.

  Could be caused by:

  • Relatively slow 4-core CPU without HT
  • Only 16 GB of memory
  • EVO slow, SSD, especially in writing
  • Using a GREEN drive, which is a curse on any mounting system
  • Lack of tuning
  • No no not the Intel video chip is disabled in the BIOS

• Can I use Airplay with an Airport Express station and a MacBook Air without going through a WAN connection?

  I want to set up my MacBook Air and an Airport Express so I can use iTunes and AirPlay to connect wireless to the AirPort Express Terminal and connected powered speakers to listen to the music in my iTunes library. Is this possible? I don't want to connect to an existing wireless network to do this. I want that this configuration to work wherever I am regardless of the availability of an existing WiFi network. I want a direct wireless connection between the MacBook Air and the Airport Express. Can anyone help with this?

  Thanks for your help in a confusing question.

  Yes, it will work.

  You must configure the Express in router mode... the EXTENDED network of the give a static IP address and ignore the problems. You will get several questions... because the network is internet-facing. They can all be ignored... This is how it is.

  You can also use a static IP configuration. I use this on a TC, but the same configuration on an Express might work better than router. It can be a delicate touch of the installation. So after some screenshots if you are having problems.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

• Using airplay on airport express with wired connections

  Hello world

  I think in a very special configuration and I was wondering if it would work or not.

  I have a Linksys router with 802.11ac ability now. I wish I had a pregnant airplay on my network, so I thought buy a used Airport express, connect the speakers to it and plug the Airport express via a LAN cable to the linksys router. I also think to turn off wifi on the Airport express so it does not disturb my 802.11ac network.

  So the question is: is it possible to have the airport base station to connect to my router Linksys on LAN and airplay works this way on the Linksys WiFi network?

  Thank you

  Zoltan

  In theory, it works... but you will have to set up the AirPort Express to create a wireless first, then go back and turn off the wireless feature.

  Ensure that the Express is a common pattern of A1392, or the previous version of A1264. Much A1084 most, it's not what you want.

• Toshiba 46TL938: 3D playback choppy when PC to TV via HDMI

  Hello

  I have a very specific problem and cannot identify exactly what the problem maybe. In short:

  -J' have a 3D film which is read by VLC but also KMplayer.
  -On my monitor 23 "1080 p via HDMI, the film plays well enough and smooth.
  -On my Toshiba 46 "HDTV playback on 3D sometimes accused, exactly the same thing when a computer cannot handle the load and the shifts on video playback.
  -J' tried to put the film on a USB and connect it to the TV. Then playback of 3D on the TV was really smooth without any lag.

  If the facts are executives work well on a HD 23 "(playedback with VLC and KMplayer) monitor, but also run smooth on my laptops screen."
  Fact is also that the same movie plays smooth a Flash USB plugged into the TV.

  I tried with another movie (no 3D) listen to from my laptop via HDMI on my TV. This worked pretty well without any lag.

  (1) so my main question is if the movie is not correct, why play it right back via a USB, but not through my laptop.

  (2) in addition, if my computers vga portable would be unable to handle the 1080, I guess that reading also lag on my monitor 23 "which is also 1080.

  I have really no idea if it's the movie, TV or vga that has the problem.
  Any suggestion would be great.

  Thank you in advance.

  Hardware information:
  TV: Toshiba 46TL938
  Notebook: Xi of Fujitsu Amilo 2528

  Hello

  I put t thinks that his TV show.
  First of all using USB flash memory, the movie is managed by Toshiba media player and second the data does not need to be send via cable.

  The notebook movie streaming, you send the signal to the TV via an HDMI cable. 3D movies contains a lot of data and this could affect the playback quality streaming of data from one device to another.

  So if you have seen some interruptions during playback, it could be linked to the HDMI cable.
  If your HDMI connection is capable of 1080 p and/or your TV is capable of greater than 50 Hz refresh rate, need you a cable of category 2. Conventional HDMI/DVI cable may not work properly with this model. Also try a short cable (1.5 to 2 m)

  You should also consult the user manual * 88.* page
  The HDMI on the TV inputs accept the VGA, SVGA, XGA, WXGA and SXGA signal formats that are
  as shown in table _page 88_ VESA-compatible.

  Since some PC and HDMI or DVI input signals of devices which differ of the resolution and frequency that are described in the table, the following phenomenon can happen; _incorrect display, detection of fake format, failure of position photo, blur or judder_.

  In this case, set the monitor output on your PC, HDMI or DVI device to conform to a signal in the table you will find in the user manual.

• Video playback Choppy/Glitchy on my Sony Vaio SVE14125CN

  Hi people,

  Return just the laptop two months.
  My Config: 3rd generation core i3, 6gig ram graphics amd 1 gig card, win 8 64-bit.

  The problem is that it is not able to play the video properly. Have you tried almost all media players available but video playback is jerky and glitychy. After almost every 20 minutes, the seeds of video with a buzzing sound for about 5 seconds. Even while buffering videos youtube and all this happens. This thing also goes for mp3s.

  A lot, I searched the internet for the issue and in a post, I have a suggestion to install the latest version of inter rapid storage technology. I did this and the problem still persists.

  Can I have some suggestions please. Anyone else having the same kind of problem?
  Y at - it was a updated driver that I need to do or I need to restore it on any of the windows update please indicate.

  In the hope of a quick and good response even more for a solution

  Thank you
  Ankit

  Hi coolankits28,

  You can check the BIOS and video driver updates using exactly the model of your computer here:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

  You can come back with exactly the model of the computer.

  If my post answered your question, please mark it as an "accepted Solution".

• Video playback choppy when slow mo and speed

  Every time I have slow down a section of a component or speed it up, playback becomes jerky and not smooth flowing. Get it fixed when I make it? If not, how to fix?

  Also, when I'm trying to ride the 2 clips together to fade from one clip to another, for some reason, faded away after the first clip, and shuts down the second clip, the clip just becomes very low, then it goes black, then fades in. How can I fix it? This is how I did it:

  I put the second clip above the first clip, then I set the first keyframe at the beginning of the 2nd clip then set opacity to 0. Then I put the second keyframe where I wanted to fade to be complete, then set opacity to 100. However, when I read, what is happening.

  I'm doing it wrong?

  FYI, I use the latest version, the CS6.

  Thank you!

  Dissolves... which is what this kind of transition is called--are pretty easy. Butt just two clips, making sure that every clip has a point 'in' which is a second or so in the video and a 'out' point one or two seconds before the end of the clip. The bits of a clip before and after points of entry/exit of the clip are called "handles".

  Go to the video/Transitions effects, take dissolve it and drop it on the joint between the two clips. A fade in the other.

  Premiere Elements could fit better your computer capabilities, I don't think it needs as much material as PrPro.

  Neil