Video playback choppy when slow mo and speed

Every time I have slow down a section of a component or speed it up, playback becomes jerky and not smooth flowing. Get it fixed when I make it? If not, how to fix?

Also, when I'm trying to ride the 2 clips together to fade from one clip to another, for some reason, faded away after the first clip, and shuts down the second clip, the clip just becomes very low, then it goes black, then fades in. How can I fix it? This is how I did it:

I put the second clip above the first clip, then I set the first keyframe at the beginning of the 2nd clip then set opacity to 0. Then I put the second keyframe where I wanted to fade to be complete, then set opacity to 100. However, when I read, what is happening.

I'm doing it wrong?

FYI, I use the latest version, the CS6.

Thank you!

Dissolves... which is what this kind of transition is called--are pretty easy. Butt just two clips, making sure that every clip has a point 'in' which is a second or so in the video and a 'out' point one or two seconds before the end of the clip. The bits of a clip before and after points of entry/exit of the clip are called "handles".

Go to the video/Transitions effects, take dissolve it and drop it on the joint between the two clips. A fade in the other.

Premiere Elements could fit better your computer capabilities, I don't think it needs as much material as PrPro.

Neil

Tags: Premiere

Similar Questions

  • Toshiba 46TL938: 3D playback choppy when PC to TV via HDMI

    Hello

    I have a very specific problem and cannot identify exactly what the problem maybe. In short:

    -J' have a 3D film which is read by VLC but also KMplayer.
    -On my monitor 23 "1080 p via HDMI, the film plays well enough and smooth.
    -On my Toshiba 46 "HDTV playback on 3D sometimes accused, exactly the same thing when a computer cannot handle the load and the shifts on video playback.
    -J' tried to put the film on a USB and connect it to the TV. Then playback of 3D on the TV was really smooth without any lag.

    If the facts are executives work well on a HD 23 "(playedback with VLC and KMplayer) monitor, but also run smooth on my laptops screen."
    Fact is also that the same movie plays smooth a Flash USB plugged into the TV.

    I tried with another movie (no 3D) listen to from my laptop via HDMI on my TV. This worked pretty well without any lag.

    (1) so my main question is if the movie is not correct, why play it right back via a USB, but not through my laptop.

    (2) in addition, if my computers vga portable would be unable to handle the 1080, I guess that reading also lag on my monitor 23 "which is also 1080.

    I have really no idea if it's the movie, TV or vga that has the problem.
    Any suggestion would be great.

    Thank you in advance.

    Hardware information:
    TV: Toshiba 46TL938
    Notebook: Xi of Fujitsu Amilo 2528

    Hello

    I put t thinks that his TV show.
    First of all using USB flash memory, the movie is managed by Toshiba media player and second the data does not need to be send via cable.

    The notebook movie streaming, you send the signal to the TV via an HDMI cable. 3D movies contains a lot of data and this could affect the playback quality streaming of data from one device to another.

    So if you have seen some interruptions during playback, it could be linked to the HDMI cable.
    If your HDMI connection is capable of 1080 p and/or your TV is capable of greater than 50 Hz refresh rate, need you a cable of category 2. Conventional HDMI/DVI cable may not work properly with this model. Also try a short cable (1.5 to 2 m)

    You should also consult the user manual * 88.* page
    The HDMI on the TV inputs accept the VGA, SVGA, XGA, WXGA and SXGA signal formats that are
    as shown in table _page 88_ VESA-compatible.

    Since some PC and HDMI or DVI input signals of devices which differ of the resolution and frequency that are described in the table, the following phenomenon can happen; _incorrect display, detection of fake format, failure of position photo, blur or judder_.

    In this case, set the monitor output on your PC, HDMI or DVI device to conform to a signal in the table you will find in the user manual.

  • Spectrum of HP 13-3004tu Ultrabook: video playback choppy after you install the latest video drivers

    I upgraded my video drivers (Intel high definition (HD) Graphics Driver 10.18.15.4248 place) for my Ultrabook 13-3004tu of the spectrum and after reading so online video (YouTube, videos on the sites of integrated information ect) play jerky and the sound is distorted. He was going well until I downloaded the new driver.

    Hello @kiwifruit28,

    Welcome to the HP Forums!

    I have read your message and understand that after updating the graphics driver, your spectrum HP 13 - 3004tu Ultrabook there are problems with the video playback. Here is a document to help solve this problem. Here is a link to HP hardware Diagnostics where you can test your hardware for portable computers. Alternatively, you can do a System Restore to a point before the end of the update of the graphics driver.

    Thank you.

    If this post helped you, feel free to click on the thumbs up!

  • Video playback Choppy/Glitchy on my Sony Vaio SVE14125CN

    Hi people,

    Return just the laptop two months.
    My Config: 3rd generation core i3, 6gig ram graphics amd 1 gig card, win 8 64-bit.

    The problem is that it is not able to play the video properly. Have you tried almost all media players available but video playback is jerky and glitychy. After almost every 20 minutes, the seeds of video with a buzzing sound for about 5 seconds. Even while buffering videos youtube and all this happens. This thing also goes for mp3s.

    A lot, I searched the internet for the issue and in a post, I have a suggestion to install the latest version of inter rapid storage technology. I did this and the problem still persists.

    Can I have some suggestions please. Anyone else having the same kind of problem?
    Y at - it was a updated driver that I need to do or I need to restore it on any of the windows update please indicate.

    In the hope of a quick and good response even more for a solution

    Thank you
    Ankit

    Hi coolankits28,

    You can check the BIOS and video driver updates using exactly the model of your computer here:

    http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

    You can come back with exactly the model of the computer.

    If my post answered your question, please mark it as an "accepted Solution".

  • The video is choppy when played on mobile/tablet

    Hi all

    I developed a small application that uses 1.6 OSMF and Adobe AIR 3.1 (Flex 4.6 beta) using DefaultMediaFactory, I try to play a video in a view. The H.264 video and uses FLV container (tried with both MP4 container). When the soft AIR is run on the desktop the video game on is very smooth, but the same application when running on an Android mobile or Tablet plays jerky video... However, the same video with a native video player plays fine on the same mobile / tablet...

    I'm doing something wrong? Can someone help me please?

    Concerning

    Basset

    Solved this problem! If a H.264 file comes with the AIR application (in the current folder), then the answer to load and read is very slow! Is it because the estate file is not removed when the application is installed?

    Same video when they are copied on/mnt/flash/DCIM/folder loads and plays very well, it looks like package a video in the current folder is a no-no complegtely

    Concerning

    Basset

  • Satellite Pro P100 - 465 Vista - video playback stutters, slows down

    I'm at my wits end :-(

    updated the drivers uninstalled - re installed drivers - drivers (nvidia does not even list the Go 7600 graphics card for vista - used another recommmened site on this site) - changed the resolution of the screen, changed bit screen depth, removed anti virus - a lot of system resources still available on each reading single video file slows down and speeds up or stutters especially bad when I have full screen.

    Tried different video files and DVD, different codecs and players, vlc, media player classic, display the time of Nero, WMP etc etc, all are made. Looks like others have had similar problems and thought that maybe they had other ideas to solve this one?

    Is there something that I have not tried? Please let me know... Thanks for your help

    I found a thread on something very similar.
    Have a look here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23614

    Maybe it helps GUYS good luck

  • Why is my video playback so choppy and grainy

    original title: WHY IS MY VIDEO PLAYBACK so CHOPPY AND GRAINY?

    I have all the latest drivers installed, IV ' e run each melody of the regime as possible, free of any virus or spyware, and I have a broadband cable connection! It is therefore frustrating IV ' e tried adjusting the video acceleration, screen refresh rate, same added more memory and the problem still persists. Both flash and silverlight videos play well, though a bit grainy and choppy during the action scenes but still another reading of the videos more like a slide show than a real video. Please help it is such a pain!

    You or anyone needing help: Please type msinfo32 in the start menu, and then press ENTER. File | Save on the open screen. File saved on disk sky then paste a link here and I'll show you how to fix things to the top.

    In the meantime, delete your LSO of the machine who follow you in all browsers and destroy the power of lightning:

    AdobeClearFlash

    @OP - a problem I already see with what you have said is "tune up." A proper functioning of that Windows does not have a tune up and these applications only destroy the excellent work that Microsoft has done by making their operating systems. You'll be better off uninstalling applications like that.

    Next best step: uninstall any antivirus in safe mode with 3rd party manufacturer tool. Reboot and install MSE to replace.

  • Sound does not, slow/choppy video playback. Reboot to fix.

    I have a problem with my PC.  Don't know if a hardware error or system.  It is common during video playback.  Usually, he plays very well, but sometimes brutally, everything is in slow-mo with no sound. The only way to solve this is to restart the PC.  On most pages, it makes also has flash declined. Tried to stop all services and unnecessary processes, virus checks, updated windows and the latest video card drivers, card sound, etc.  Not sure how this can be fixed.  Extremely boring all playing a game and my sound dies.

    Hello
    OK, this is the driver related or heat related.
    1. set to update your video and sound drivers restart and try again.

    Look for the old drivers Device Manager and update

    Drivers can become outdated and could be damaged to the point where they slow the system performance. Looking for the old drivers Device Manager, follow these steps:

    Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

    Click the Hardware tab, and then click Device Manager.

    Right click on the device, and then click Properties.

    Click the driver tab.

    Compare the version of the driver on the tab, with driver version information on the latest version of the driver that is published on the website of the manufacturer.

    To resolve problems that are caused by corrupted or outdated drivers, install the latest drivers:

    Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

    Click the Hardware tab, and then click Device Manager.

    Right click on the device, and then click Properties.

    Click on the driver tab, then click on set to update driver.

    Follow the instructions on the screen to complete the update of the driver.

    2. check the power of your computer, especially near the card... check video to make sure that this video card is not loose (if it is not a card on board)
    Eddie B.

  • Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

    Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

    Hello

    Thanks for posting in the Microsoft Community Forum.

    I understand from your description, that you get beep when the camera is focusing.

    To better understand the question, please answer the following questions:

    1. have you made changes on the computer before this problem?
    2. is it works much earlier?

    Come back with more information to help you better.

    I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

    http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

    You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

    For more information, see the link below:

    http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

    Hope the above information is helpful. If you have any question back to us, we are happy to help you.

    Thank you.

  • When I am in fact and I play my video is going really slow why is this and how to fix that?

    When I am in fact and I play my video is going really slow why is this and how to fix that?

    You've probably used uncompressed default rendering parameters.

    FAQ: What is the best format for rendering and exporting from After Effects?

    FAQ: Why my huge output file, and why didn't he play back smoothly in a media player?

  • Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

    Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

    I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!

  • Video playback very slow failure with iGPU and dGPU activated simultaneously

    Until a few months ago, my PC has been run with an i5 760 and my current Radeon HD 7850 on items 11-first reading was smooth and I could edit my videos fine.

    However, recently I installed a new processor and motherboard - a 4770K i7. The key thing here is that it has integrated GPU (so called "iGPU") that can operate in tandem with my current dGPU (discrete GPU, the HD 7850) by the presence of jobs such as the rendering of encoding videos and sent to the iGPU in a function called Quick Sync transcode. In order to use this, I had to link a virtual/VGA monitor to my motherboard port (because according to this post by vaesauce on the forums of the OBS), and for all applications that worked perfectly (Handbrake transcode very quickly, and I can listen to with OBS with negligible performance). Except one - first elements 11.

    When I started first elements 11 to edit a short clip yesterday, I was greeted with a screen that informed me that I had incompatible drivers. I went and checked my video drivers for both of my GPU - to both day - the reinstalled and restarted. Tried once more, the same question. Past to try and change just resulted in a complete failure of video playback and audio playback. I found the solution was to disable my iGPU in Device Manager, then it works fine.

    Now, here's my question - how can I have the dGPU and the iGPU active and able to edit videos with Premiere elements 11? It all works in this way, the constant entry in the Device Manager before and after the installation of a video is very annoying (also, I'm sure PrEl 11 would benefit itself from the QuickSync!)

    > found the solution was to disable my iGPU in Device Manager, then it works fine

    As far as I know, it's the only solution, because Premiere Elements is not really designed for double graphics cards

  • Choppy video playback in Windows Media Center (Windows 7) WTV

    I recently experienced a video playback jerky with windows media center.  Sometimes the recorded TV (WTV format) play very well for about 2-3 minutes until the video playback is very jerky (probably about 5 to 10 frames per second instead of the usual 30-60 fps).  The audio is not again normally.  Windows Movie maker also plays choppy video (Windows Media Player seems to work very well).  The main menu of Windows Media Center, itself becomes generally restless slow when I'm scrolling autour options, even when there is no video game in the background.  Video streaming on the Internet and DVD seems to play fine on Windows Media Center, and I can even stream HD video without problem.  I also know that this isn't a problem receiving the TV tuner since I test with the video recorded previously.  I bought my computer in June 2009 with Windows Vista and upgrade to Windows 7 a few months later.  Everything worked perfectly well until recently.

    I tried to update my video card drivers, reallocation of Windows Media Center to a task of "high priority" to improve performance, the RAM Cache to improve the performance, my graphics card setting to low quality setting to have superior performance to compensation.  I even tried to reinstall Windows Media Center, reinstall Windows Media Player and the restoration of my entire computer to a State a few months in the past where the problem was not intervened.  The memory usage seems OK too (I have 6 GB).  Basically, I don't think that the issue is performance related.  I'm guessing that there is some little conflict, pilot program, codec, etc., which is originally the video playback to go bad after a few minutes.  Any thoughts?

    Here is some info on my Page "system information":

    Microsoft Windows 7 Home Premium
    HP-Pavilion
    System Type x 64-based PC
    Processor Intel (r) Core (TM) 2 CPU Quad Q8300 @ 2.50 GHz, 2500 Mhz, 4 Lossnay, 4 logical processors
    BIOS Version/Date American Megatrends Inc. 5.43, 10/09/2009
    SMBIOS 2.5 version
    Physical memory (RAM) installed 6,00 GB
    6,00 GB total physical memory
    4.33 GB available physical memory
    12.0 GB total virtual memory
    9.56 GB available virtual memory
    Page file space 6,00 GB

    NVIDIA GeForce 9500 GS
    Adapter RAM 512.00 MB (536,870,912 bytes)
    Installed Drivers nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
    8.17.12.6099 driver version
    File INF oem80.inf (section Section004)
    32 bits/Pixel

    For what it's worth, I was faced with the problem of stuttering for always (continuously from a WHS for a HP Media Center Extender) and had tried all of the recommended patches (updates driver, network card settings tweaking, etc..)  Nothing helps.  Last week my router died (Netgear WNDR3700, who was the State of the art when I bought it a year ago).  I replaced it with an old but unboxed Linksys WRT320N and stuttering all my problems disappeared.

  • WiFi unstable and slow Internet high speed

    Hello world:

    Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem.


    Symptom:

    Internet mainly speed just unstable using a wifi connection. (no problem with wifi connection self and my wifi suddenly grave would not be)

    Example:

    • FaceTime with my friends and the connection would suddenly abandon or images & audio gets fuzzy.
    • Videos in online streaming and suddenly occurs buffering.
    • Download file of software update iPhone via iTunes, the speed is slow, he needed to take 2 h at the end and later on a window display "cannot download and check your internet connection".
    • Suddenly cannot open websites like site apple.com, google.com. Sometimes it will take more time to open Web sites.

    Hardware and software:

    MacBook Pro mid-2009, OS X EL Capitan 10.11.5

    ISP: Cox, 50Mbps

    Modem & router: Netgear N450

    Test:

    Turn off my wifi and connect my macbook pro with modem & router with cable, internet high speed is stable and fast. Internet speed download speed test result display is of around 60Mbps, download speed is around 8Mbps. And I tried streaming using the connection cable, there was no buffering.

    I already tried the possible Solutions:

    • Restart the Macbook pro and restart Modem & router: will not work. I mean the internet will be very well at first, but later would be unstable again.
    • Reset Wireless Modem & router and change channels: useful, but not completely solve the problem. After you change the wireless channel, I tested my internet speed and the result showing 20-40Mbps (slower than 60mbps) speed download. Sometimes, the result will be like 6-8Mbps and sometimes it will be 60Mbps. If its unstable.
    • Wireless diagnosis: result indicates connection is good.
    • Called my ISP provider: they checked and said all right.


    Other Questions & details:

    • The internet is ok for most of the time. But when all of a sudden I can't open site or I can't download and streaming & FaceTime at normal speed, his frustration.
    • I thought it might be related to my hardware since its an old macbook pro. I can't run Apple hardware test because I don't have the installation disc more and my macbook pro is very old. Is it a third party software that can perform the test hardware on mac?
    • My wifi used to be very stable and I don't have to worry. Just for these last two weeks.



    I really appreciate your time and help! Looking forward to any reply!

    Wi - FI connection drops

    Connection Wi - Fi in OS X Yosemite problems

    Wi - Fi in OS X Yosemite connection problems (2)

    Connection Wi - Fi in OS X Yosemite problems (3)

    WiFi potential temporary fix - Yosemite

    Also try turning off Bluetooth.

    WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

    If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

  • Audio/video choppy when you try to play DVDs

    When I try to read a DVD, Windows Media, or any other program, I get the choppy video playback and his jerky. I can play CD and games perfectly fine but when I try to play a DVD I can not. I tried the driver update but it says it's the most up-to-date available.

    When I try to read a DVD, Windows Media, or any other program, I get the choppy video playback and his jerky. I can play CD and games perfectly fine but when I try to play a DVD I can not. I tried the driver update but it says it's the most up-to-date available.

    ==================================
    If this happens only on some DVDs... they can be
    damaged or needs cleaning.

    If it happens with all DVDs... you can have a material
    problem with your DVD player. John Inzer - MS - MVP - digital media experience

Maybe you are looking for

  • 5s to original SIM card transfer

    I have a 5 s, which is damage a serious (non-repairable) screen.  I have 2.5 weeks until my contract ends. Can I take the sim from my old phone (original iPhone) 5s?

  • Scores of Boot Camp and Windows 10 anniversary of small size

    I have a Mid 2010 Mac Pro with a score of Boot Camp of 50 (46.7 GB usable) GB with Windows 10 1511 on it (10586 Build). I tried to install the update to Windows 10 anniversary but he barfed saying: I have only 6 GB free and he needs 20 GB. Almost all

  • Qosmio G30: How to add the driver RAID without floppy drive?

    I'll put win xp tomorrow, as far as I can remember I will be asked to insert a floppy with additional RAID/SCSI drivers - I guess I need some drivers for XP see my RAID stripe. I was able to download 'raid-drv-qog20-xp - 1380.zip', but I'm afraid to

  • Pavilion dm1z-4200: Pavilion dm1z-4200 multiple problems

    My laptop, model mentioned above, is about 4 years old and the display of several annoying habits or problems of age at least. First, he takes a loonngg to exit the mode time "sleep" despite the repeated keyboard taps, clicks of mouse and touchpad ta

  • Missing Vista recovery works

    Hard drive crashed bad, took several tries using the recovery to not even the computer to boot disk. Now, the MS Works preinstalled is missing... How can I get that back? Has been installed on the laptop when I bought it 2 years ago and not be filled