Playback of WMA files

Similar Questions

• Cannot advance from .wma to .wma file when the files are contained in the audio books folder

  I have a few low bitrate of the things the word .wma files and load them into the folder of audio books of the Clip +.  I did this because these files seemed to be closer to an audio book than music.  I loaded the MSC mode.  There is no DRM on the .wma files.  I created a playlist .m3u files.  When I played them back, I couldn't jump between these .wma tracks.  I could fast forward and rewind through them but not to jump.  I thought it was really strange.

  I ended up moving these files in the audio books folder in the music folder, and I could jump between tracks very well during playback.

  I have to admit that I don't know a lot about audio books and I did a google search and I don't seem to find anything that could prevent or discourage people from being able to skip between tracks on when you listen to an audiobook.

  Someone knows what's going on here or can see this problem themselves?  I'm not supposed to be able to jump between tracks in the audio books folder?

  Thanks for your help.

  If you press the [down] key during playback and look at the settings, is chapter mode (Ch Mode) on or off?

  If set to off, you must pause and hold the left/right button to skip tracks (I think that the purpose of this measure is to avoid accidentally changing track when you wanted to only go fast forward or rewind).

  You can set Ch. Mode = we and get the behavior you expected, but it could move through a tedious track.

• Manufacturing of Windows Media Player ".". WMA files"sound like a scratched CD

  Windows Media Player has recently started playing all back '. " WMA files"as they were damaged / scratched CD being played.  But when I take these same files to another program of reading, they play perfectly.

  When I start to read the file, I see the message "Change the media" and this may take a few seconds to more than a minute before the file actually starts to play.  Random playback when audio will jump sometimes, exactly in the same way he could play a scratched CD.  It repeats or taking a break before you continue reading.

  Then when it arrives near the end of the runway, HE STILL blew.

  After playing with it I finally understood that the jump at the end of each track has been the program of preparation for playback of the next track.  Because, when the next track begins to play there is no delay in reading.  But if I manually change the track then I get the message 'Change media' and delay important.  I think that the two are linked.

  As I said before, it started a few weeks ago and occurs only with Windows Media Player.  I in other audio programs, IE. Creative, don't do that.

  Furthermore, to the best of my knowledge nothing new has been added to WMP, IE. New Plugins, etc.

  Any ideas on what is the cause and how to fix.

  Thank you

  Hello

  The problem happens only when you play wma files?

  Disable audio enhancements and see if that fixes the problem.

  a. open peripheral Audio and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.
  b. on the playback tab, click speakers and then click Properties.
  c. click the enhancements tab, and then check Disable all improvements.

  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to the
  your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated. If disabling audio
  improvements do not solve the problem, contact your computer manufacturer for assistance.

  For your reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Impossible to play .wma files in Windows Media Player 12 and error C00D11B1... Windows 7

  Operating system: Windows 7 Professional

  Problem:

  > When you try to play the .wma file, get error "Windows Media Player has encountered a.

  problem reading file. »

  > Web help got the error 'Windows Media Player C00D11B1 ".

  Not tried:

  1. turn off Windows Media Player, programs and features > features windows and

  turned back on.

  2. rename the folder "C:\ProgramData\Microsoft\Windows\DRM" DRM

  3. upgrade the DRM components of

  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  4 uninstall the Nero 7 Ultra Edition.

  5. check the registry entry "HKLM\SOFTWARE\MICROSOFT\DRM" cannot find the key for

  export the key of the machine of work based on windows 7.

  6. run the troubleshooter for windows media player settings.

  7 play the same .wma file through the network on the laptop... able to play very well.

  8 registered the dll files to Windows Media Player

  9 uninstall KB974431 update

  10. run the troubleshooter again for the Windows Media Player library

  11 run the inplace Upgrade - same question.

  12. copied any new file .wma from work computer... able to play this file very well.

  13 RIP new cd to the format of .wma on the computer... able to RIP but not able to play

  the ripped file.

  14 rip to .MP3, able to rip music well and able to play too thin.

  15. update DRM components again after you run the Inplace upgrade.

  16. new user account.

  17. minimum.

  18 unchecked Audio enhancements of   Panel > Sound > playback > Speakers > Advanced tab

  Varun J Hi,.

  This question comes to be a problem with the drivers of its updated map THROUGH as soon as we are updating the drivers from the sound card, we are not able to play the files with licenses .wma, but if uninstall us the drivers newly installed and restart the computer to get the old drivers working again and now able to play the same files .wma fine without problems.

  Thanks for the help anyway.

  wason_nitin

• Stuttering during playback of AVI files

  I have problem during playback of AVI files on my computer, they stutter when he plays. The problem arises with a wide range of media players.

  The problem started about 2 months ago. Before that time, the same file (s) to play OK!
  The same files play OK on other computers (tested today)...

  I'm having a Satellite Pro m-30, works with XP pro SP2.

  I have tried everything I can find without success of Ant:
  Uninstalled nearly every program.
  Check the virus.
  Checked for Spy-wares.
  Stop all unnecessary processes.
  Defragment the HD.

  Help is wanted

  Hello

  Just a question: do you have this problem just with avi files or even mpg or files if you watch movies with WinDVD DVD?

• Walkman NWZ-E354BLK play Non - DRM WMA files?

  I want to know before buy you. Player Mp3 Walkman NWZ-E354BLK plays WMA files are unprotected by the management of digital rights (DRM)?

  Thank you for your post and welcome to the forum.

  Walkman NWZ-E354BLK will play files non - DRM WMA and DRM from WMA files encoded (as long as they are transferred via Windows Media Player).

• Read wma file music by AO card usb-6251

  Hey everybody,

  Can I play music wma file throught analog output or usb 6251. I have an error that my program "can not recognize the sound format. I am user of the version of Labview 8.5.

  If someone knew and can help me, please.

  Marek

  

  Your wma file type. LabVIEW can read wav files only. But you can find many free software that can convert your file to wav format. However, it is a little big to 15 MB wav format

• My new laptop will not play download wma files it says that he will play only wav or mpe - suggestions?

  I bought a Samsung Galaxy Mini recenly and can not download music files, I think it's because it does not recognize the .wma files, but my laptop does not download my cd to WMA - of the suggestions...

  Hello

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/us/support/

• I have update problems that interfere with the operation of the Overdrive Media Console software compared to WMA files.

  Windows is completely up to date through the date of this post.

  OverDrive Media Console
  -MP3 download and play perfectly
  -Download error 0xC00D2751 for all WMA files (~ 80% of audio book from the library files are downloadable in this format), informing me to contact Microsoft.

  Solution on the Microsoft website:
  -http://support.microsoft.com/kb/913800
  -The patch will not install.

  Journal of problem with the installation of the hotfix:

  [KB913800.log]
  0.031: ================================================================================
  0.031: 2009/11/16 (local) 18:35:17.508
  0.031: d:\9b8cb172a0ae06ea215f6af0\update\update.exe (version 6.2.29.0)
  0.046: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  0.046: hotfix started with following command line:
  0.078: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
  0,109: SYSTEM\WPA\MediaCenter\Installed is equal to the Value specified
  0,109: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,109: second Condition in Prereq.CheckRegistry.Section failed
  0,109: Check condition for 1 line of prerequisite returned FALSE
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: KB913800 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: user input: OK
  20.343: Update.exe extended error code = 0xf0f4
  20.343: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Cannot find another solution on the Microsoft site.

  Back emails with Microsoft technical support has failed to a solution.  Beyond to download the fix will not download, they have no extra information for me.

  whitepawn23,
  Are you having to provide updates through Windows Update?  If so, I suggest that you perform a clean boot , and then run Windows update.  If you continue to have a problem with a certain update you need to download and install it manually.  Alternatively, you can consider removing the Overdrive program and new test.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to download wma files. Error: 0xC00D2728

  When I try to download my public library wma files (in the Overdrive Media Console software), I get a message that says: "error: 0xC00D2728: a security upgrade is required to perform the operation on this media file." When I followed the instructions for 'Windows Media Security upgrade', I find myself on a Microsoft upgrade site at http://drmlicense.one.mirosoft.com/indivsite.  However, the 'upgrade' button is "grayed out" and there is no guidance as to how to accomplish the upgrade also.  I am in Media Player 11 and Windows XP and have automatic updates on.  WM11 and XP received all automatic ugrades to date.

  Windows Media Player 11
  Error: 0xC00D2728

  Hello Jazzquilt,

  Thank you for your message.  Please try the following link and let us know if the upgrade option is gray as well.
  http://drmlicense.one.Microsoft.com/crlupdate/en/crlupdate.html
  Please let us know if it did or did not help to solve your problem. \
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot launch SNDREC32.exe minimized during playback of batch file?

  Hello

  Is it possible to launch SNDREC32.exe from a batch file, this sound recorder is reduced when it reads the file?  I got so the BACK box is hidden, but I like it if tape recorder was automatically reduced also when it reads the audio file.

  Is there command-line switches in sound recorder (SNDREC32.exe) allowing the application to be minimized automatically during playback of the file?

  Hello

  The question you posted would be better suited in the Windows XP IT Pro Forum. I would recommend posting your query in Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• .wma files will not play in WMP11

  Suddenly my music wma files will not play in WMP11. I have tried everything I know and read, nothing helps. So far I tried to convert the MP3 files is not working even in these programs (v3.0 have all Audio Recorder being one of them); I tried to delete the ID3 and all the other codes (HeadStrong ID3Kill v1.4), all what has been clear all my songs the album/song. etc - HUGE mistake! I tried to play in RealPlayer - still will not play wma files only mp3s; removed and reset the codecs - nothing happened. so on and so forth.

  What in the world is happening? I uninstalled my old version of WMP and installed more current. When I went to play the WMA in WMP11, I get an error that it can not play. It does not itself error code number, only this statement in error. I tried to restore my computer to a date and time earlier, he said that he could not change my Media Player to the previous version.

  I have more than 1,000 songs on my computer, I simply can't pull it all back in (for days and days), I copied them on 2 sticks of memory as backup, also HUGE mistake because them copied without albums and song titles.

  Help please!

  Starr

  Hi Starrj3030,

  See the link below and run the Fixit tool available, check if it helps.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

• WMP will play any WMA files say that it is not installed correctly

  When using napster using WMP it won't play any WMA files say that it is not installed correctly, BUT it can play MP3 files.
  I've used this for years and only by recent this problem started?

  Hello

  Follow these methods and check if that helps:

  Method 1:

  Follow the exact steps in the article to remove Windows Media Player 11, and then try to install it and check if it helps:

  How to uninstall Windows Media Player 11 in Windows XP

  http://support.Microsoft.com/kb/934372

  Method 2:

  You can also read this article and check if it helps:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  See also:

  FIX: update for Windows Media Player 11 for Windows XP

  http://support.Microsoft.com/kb/939683

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

• change wma format to a CD format so it will play music on old stereo that do not support wma files, for every time I rip music it changes to wma

  even on my window 7, it do not give me an option to go back to a cd format, I tried 2 GB Hp of power and it has not fixed the problem, thanks

  In fact, we should not "convert" the .wma files...
  When you burn an "Audio / Music CD'... files on.
  the CD will be the. Extension of the CDA.

  Windows Vista - burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player (Expand the section that says: "Burn audio CD")

  And... the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

• Problems with playback of .mpg files & other video files

  Hello:
  All of a sudden I couldn't read the. MPG files (like other video files. AVI are reading OK!) : I have not had any similar problems with him before!  I checked briefly setting CODECs, but did NOT find anything wrong. I also found the following:

  -Receive an error message "the parameter is incorrect" when I try to open any video file EXCEPT. FLV files: all the other video files cannot be opened by the player 'Crazy' 'MEDIA PLAYER CLASSIC - Home Cinema' that literally blocks the use of the Windows Media Player - what an intrusion by the player "MEDIA PLAYER CLASSIC - Home Cinema" against the wishes of the user.

  -J' always set up as the DEFAULT program for most of the video-Windows Media Player files and I DESPISE any program that dares to change these settings of the PC user.

  I would be very happy if someone can help me with the following:

  -What is the cause of MOST OFTEN of such unexpected problems with the PLAYBACK of VIDEO FILES
  -How to make Windows Media Player troubleshooting to RESTORE the original settings for the opening of the video files: there seems to be EXTREMELY disorganized and deficient/little clear instructions by Windows HELP how effectively restore the functioning of Windows Media Player - have Version 11.0.6002.18311 (Pentium IV with VISTA Home Premium).

  Thank you.

  Hello thorsak,

  I suggest reviewing the responses in this thread, because they seem to relate to what you're asking:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/is-there-a-way-to-uninstall-and-reinstall-Windows/eb329d2e-0f70-4b27-81bd-bbdd64b0603a