Please help-dv7-1260us with a power on password of 84225190

Similar Questions

• Please help me, I don't know his password iclaod

  

  Please help me, I don't know his password iclaod

  You iPhone or that you bought second hand device?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Help my 1311 Hp2 says power on password

  My hp2-1311 said power on password I have no no, can someone help me

  Usually the power on password is a BIOS password.  Look at THIS page and scroll down to "Erase password settings"

• HP Pavilion dv7-4065si: PAST BIOS POWER ON password REMOVAL

  my friend put the bios password on my HP pavilion dv7-4065si by mistake. the good side is that he gave me the password and its work. but it annoying to every time to enter the password to power. Please help me to delete it because I don't want.

  Hello

  You can remove the need for a power on password as follows.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to highlight the power on password and press ENTER.  Enter the current password and then the new password, simply leave this blank and press on enter - do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Kind regards

  DP - K

• HPE-495 desktop - HARD drive is u/s, please help to rebuild with SSDS

  Hi all

  [[2 TB Hitachi SATA 3.0 GB/s] HARD drive GL8E]. The current failed HARD drive is connected to the sata1 and there is a spare on the motherboard sata2. Spare power supplies available [CH 4 & ch 5]. Office was running Windows 7 Home Premium 64-bit.

  I would like to install a 840 EVO Samsung 250 GB SSD SATA 3 with Windows 7 Home Premium 64-bit Service Pack 1 and a second [still undecided 2 TB Western Digital SATA 3] as data drive.

  These discs are backaward compatible with the existing architecture of SATA - y at - it all isuues with this proposal, would I need to make changes to the BIOS, other than this initial boot off dvd player to install the new windows on the ssd drive?

  Thank you very much.

  If you replace the current HARD drive with SSD in SATA1, new in SATA2 HARD drive and let the CD/DVD in SATA3 on your HP Pavilion Elite HPE-495uk desktop, your computer should boot the Windows 7 Home Premium 64 bit DVD into the CD/DVD drive. This assumes that the disks are new with absolutely no data on them. You may need to, press the "ESC" key or the "F # ' suitable for your computer, select the CD/DVD drive as a boot device.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Please help: System freezes with error message "generic host process for win32 services has encountered an error and needs to close."

  Please can anyone offer help - whenever I start my PC it freezes
  then displays an error message "generic host process for win32 services has.
  encountered an error and needs to close. »

  In this error message, I get more information:

  szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
  szModVer: 5.1.2600.2180 offset: 000122ba

  more information:

  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txt

  I tried a lot of things: update drivers, run Ccleaner to check the registry,.
  checked for malware, Virus, uninstall xp service pack 3... Is there
  anything else I can try?

  After I clicked through the error messages above appears the taskbar
  Crash, then reappears, but with graphic reduction (gray color)

  I checked "Event Viewer" in "control panel" from here I get
  the following error message:

  Failed application svchost.exe, version 5.1.2600.2180, failed module
  ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2 32 31 38 30 20 69 0.2180 I
  0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
  0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
  0040: 32 36 30 30 2 32 31 38 2600.218
  0048: 30 20 61 74 6f 20 66 66 0-off
  0050: 73 65 74 20 30 30 30 31 the value 0001
  0058: 32 32 62 61 22ba

  also an another error at the time of the accident

  0000: 42 75 63 6 b 65 74 3 has 20 bucket:
  0008: 31 32 39 36 37 35 38 33 12967583
  0010: 36 0D 0 to 6...

  Fault 129675836 bucket.

  I am extremely grateful for any help, this problem is about to drive me
  crazy!

  I solved my problem...

  To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.

  Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info.  It was originally the svchost.exe service to fail (and default recovery for this is to reboot)

  I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".

  Good luck

• Please help, audio problem with XW6600 and NVS 315

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP 720837-001 replacement part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is resolved, if I reinstall the NVS 290.  For both cards, I use the latest version of the nVidia Driver and driver HP.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  First of all, you want to be sure to load the latest version of the BIOS on this xw6600.  It is from the end of 2012.

  I met this problem several times... do not know if these suggestions will help, but I think that your experience may be related to previous losses audio when the latest drivers are loaded that contain "pilot high-resolution audio" in the game of video driver.

  The current Quadro NVS 315 W7 64 bit graphics drivers Quadro ODE 320.92, which work well in my xw6400, xw6600 and xw8400 workstations running several types of cards Quadro FX and NVS.  If you have used the standard installer downloaded and used the standard "recommended" install that he threw into about 5 pieces, that only one you really need (selected by default single main driver in a custom installation).  That's all I use now, throughout my nVidia installs, and I also check the clean install box on the last page before loading begins in the custom installation path that I go down.   So, to charge fees, I first uninstall anything nVidia via the control panel and then hunt around on drive C for nVidia remains in the trash.  This includes any folder with nVidia in its title, including temporarily enable Show hidden files and folders in the tab views in the Folder Options Control Panel.  I then reboot and finally make this unit "clean install" - checked - technical of custom installation.

  Try this approach first... it's easier.  You might have luck, and audio can return.

  One of the elements that was installed in the "recommended" non-custom installation was a driver of nVidia high-resolution audio.  This seems to conflict with / replace the RealTek driver who was using your audio RealTek chipset on the motherboard.  I discovered that there is a part of BIOS for those workstations which is usually hidden, but sometimes becomes visible with installing drivers high-resolution audio.  F10 in the BIOS, go to the Advanced tab, down for the terminal Options and check if rebalanced Audio appears just above monitor follow-up.  If he was not hidden by the nVidia high-resolution audio driver load then it will virtually always disable status.  Change to activate, F10 to save the change and BIOS don't forget to save changes on exit and F10 again when BIOS asks.

  We got exactly that occur as a result of installing the drivers nVidia GeForce to a GeForce GTX 650 Ti BOOST on a xw8400 and I saw that happen with these latest nVidia Quadro driver packages, too.

  This is the second best method to solve the problem, if it works.

  Another approach is to save your current BIOS settings via replicated in the BIOS Setup, load into my settings to clone xw6600 (attached) and see if the sound comes back like that.  Sometimes integrated Audio remains hidden when we F10 in the BIOS, but my clone settings was set correctly even though the option remains hidden.  You can open the attached CPQSETUP. TXT file with Notepad and Find allows you to do a search for "audio"... the second shot will be the Audio integrated, one.  Note that it is configured to allow this clone... He usually lies in a status of disable, otherwise.

  You can edit it with Notepad, except that, and charge that the version of your original settings of the BIOS using replicated Configuration changed if you want to use this technique with other types of work, such as the xw8600 workstations.  You will always find this entry via this method, even though it is hidden when you look directly into the BIOS, so it's a good thing to know.

  It is the third most easy.

  Fourth... you start dinking autour with drivers in Device Manager.

  Replicated configuration function of the BIOS with a USB, it is very easy to save your original BIOS settings, try another set of settings and return to your original if you wish.  The clone CPQSETUP. TXT file can be edited by hand (with caution) to convert a Disable to activate, for example, saved and then downloaded into your BIOS firmware.  If you want to try attached BIOS xw6600 clone settings make sure to change off the coast of the "xw66002" so that only CPQSETUP. TXT is on your USB... Replicated configuration works which with a file named exactly that.

  I posted here a few days on exactly the configuration of the workstation this clone has been optimized dethrone archive on it.

  Finally, please post back with your findings because it has become a more common problem, and the more data we have here: it is likely, we will find the fastest solution boilerplate.

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• Please help Dreamweaver Rookie with models

  Hello world

  As indicated in the title I am a rookie in Dreamweaver.

  I create 4 new sites, each with a different URL for my business.

  I downloaded a model pre-made off Adobe and added a few things, customize colors and graphics and understood my point.

  I would like to copy this model with the intention of using it for 3 other Web sites in order to keep the same navigation for all 4 sites bar, so I changed all the graphics (header, footer, and images of main container) to create the new Web site, changed the content of the page, saved as a template with a new name to my folder models even in the root folder is created for the site.

  Unfortunately, when I changed the graphics he changed also the graphics on my original page (but not content)

  So, I went back to the original page, restored the graphics to where they were, and it is change the new model as well.

  I tried to save the model as an HTML page, and it didn't work, change always both pages.

  So here's my question, how do I do, I want to be able to dupicate this model, keep all the same nav, keep all the formatting but can change graphics from one page to another.  Help, please!

  Thank you

  Mike

  Sorry, but I do not understand the situation, I'm afraid.

  If you create 4 separate site, then the best thing to do would be to create separate site definitions 4 - each pointing to a new folder that you created for each site.

  Site definition 1 points to the folder Web site 1

  Site definition 2 points to the folder of the Web site 2

  and so on...

  You can then copy the folder of original models in the folder newly created for each of the other sites. Copy also through images, etc. that you want to use on each of the sites.

  It can be tedious work on 4 different sites, but then again, it's better than getting caught up like you - trying to keep everything in one folder - it will not work.

  That's how I do it anyway - but as I said, perhaps I'm not following what you're trying to do.

• BlackBerry smartphones, PLEASE help me! with app error 523

  I can't figure out what to do here.  I was using my phone earlier today and when I picked it up it had reset 523 app error.  pushed that and it just returned to this screen again.  I took out the sim card, battery and left for a while, put it back in... well, it's not working!  Help me!  It's the only way I can communicate with anyone.

  Hello. What happens after that the device did start? Does always show the whitescreen with app error?

• Please help a newbie with a video make the problem!

  IM new to After Effects, so please forgive if this is a silly question.

  
  I have an Animation of edge with a background color of #ffa800

  I imported a video after affects that has a transparent background.

  Research tells me that the video is never really transparent, so I'm creating a solid layer in AE, placing video on it and setting the blend mode 'screen '.

  I now have a video with a background color of the #ffa800.

  However, when I export / view the video output and import in my project of edge to animate the background color of the video is disabled and does not match my background of edge animate.

  I spent all day experimenting with different export made direct EI options and also through Media encode. IM now completely stumped.

  I also tried setting the video background color #ffa800 and masking then my video. It keeps me from having to use a "screen" blend mode, but I get the same exact results.

  Could someone please give me some advice on where I'm wrong please. The bottom is so close, but either slightly darker or more clear that I put that spoils the overall animation effect I want to create.

  
  Thank you

  
  Paul

  Lack of information exact system, rendering settings and so forth person can tell you a lot. That said, there are a few fundamental failures in your plan. First of all, web colors do not mean anything in AE or in most graphics programs than elsewhere because of the object of little quantification management and possibly color errors. Whatever colors you compose, do it using the normal RGB sliders. Second, blend modes are not transparency, even if for mathematical reasons, the formula mixture may appear to eradicate certain colors. Third, you must take into account the values of Gamma. Video is not linear mixture and time your screen of computer as well as the video content itself may have a built-in Gamma value. Thus, your merge operation could already produce erroneous results as a light mist, the encoding of the video file could introduce Gamma tilt and then finally in the last step, any tool that you use to view perhaps apply dynamic corrections thus or in reverse, not at all. So this is essentially to check these things and properly calibrate / setting of your monitor and your system color settings and make use of color in AE management, if any. However, in the end, you always see minor deviations of color. It is inherent in how compressed formats like H.264 work. You can only try to minimize as much as you can.

  Mylenium

• Please help get started with apex

  Hi Experts...
  
  I just downloaded database XE 11.2 and installed on windows xp x 86.
  
  I want to learn APEX, so what I need is that you tell me how to start, I search some forums but I can't find a good sign.
  
  I need to create a small database table 3 (I know not how... with Toad)
  
  but then what?
  APEX is installed? or I need to run any script?
  
  I can reach http://127.0.0.1:8080 / apex, I see a link 'start with oracle application Express' but it is where I don't know what to do with the creation of the workspace...
  
  I'd appreciate any help really.
  
  Thanks in advance.

  The "Oracle Database 2 day + Application Express Developer's Guide" is often a good starting point.

• HP Pavilion g6: can someone please help me with administrator password or power on please?

  Help me please...
  
  "System or power on password administrator password"
  
  Entry 3 passwords incorrect then said...
  
  "System disabled" [63357967]

  @GeneDg

  Enter 72035369

  Kind regards

  DP - K

• HP KP721AV: Need help, computer father has the blue screen "enter power - on password.

  I need help.  Electricity blimped last night at my father, leaving the computer does not off properly.  We have tried to unplug the unit from the wall to reset, but again it still leaves us with the "power - on Password enter" can anyone help?  Thanks in advance

  Hello:

  Please see the below troubleshooting guide, annex B, page 62.

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3785403&docid=emr_na-c01516072&docLocale=en_US

• Please help me to assign a new Id for different people

  version 11g
  
  Please help me in new id of person assiging for dirrerent so people it's middle name is different
  I've listed on three scenarios in the example below. Please help me
  
  

  WITH NAMES AS( 
   /* Scenario1 -- Three dirrerent people so assign Three diffrrent ID,
                    keeping 1 id as is and assign two new ids from sequence*/
   SELECT 47540310 ID , 'WO' LAST_NAME , 'ROBERT' FIRST_NAME , 'C' MIDDLE_NAME FROM DUAL UNION ALL  
   SELECT 47540310 ID , 'WO' LAST_NAME , 'ROBERT' FIRST_NAME , 'W' MIDDLE_NAME FROM DUAL  UNION ALL  
   SELECT 47540310 ID , 'WO' LAST_NAME , 'ROBERT' FIRST_NAME , 'X' MIDDLE_NAME FROM DUAL  UNION ALL  
  
    /* Scenario2 NULL can be equal to any value if there is only one value to equate with 
      In the below case we have two values that can equate with null so assign three diffrent ids */
   
   SELECT 47540300 ID , 'AMATUZIO' LAST_NAME , 'ALBERT' FIRST_NAME , 'J' MIDDLE_NAME FROM DUAL UNION ALL  
    SELECT 47540300 ID , 'AMATUZIO' LAST_NAME , 'ALBERT' FIRST_NAME , NULL MIDDLE_NAME FROM DUAL  UNION ALL 
   SELECT 47540300 ID , 'AMATUZIO' LAST_NAME , 'ALBERT' FIRST_NAME , 'L' MIDDLE_NAME FROM DUAL  UNION ALL
  
    /* Scenario3 NULL can be equal to any value if there is only one value to equate with 
      In the below case we have ONE VALUE  that can equate with null so DONT ASSIGN ANY IDS*/
   SELECT 17540300 ID , 'AMARONE' LAST_NAME , 'JOSEPH' FIRST_NAME , 'J' MIDDLE_NAME FROM DUAL UNION ALL   
   SELECT 17540300 ID , 'AMARONE' LAST_NAME , 'JOSEPH' FIRST_NAME , NULL MIDDLE_NAME FROM DUAL
  
   )
   Select * from names
   
   o/P Required
   ID    LAST_NAME    FIRST_NAME    MIDDLE_NAME
  
  47540310    WO      ROBERT          C
  99999990    WO      ROBERT          W                   -- New Sequence Number
  99999991     WO      ROBERT         X                   -- New Sequence Number
  47540300    AMATUZIO    ALBERT    J
  99999992    AMATUZIO    ALBERT                          -- New Sequence Number
  99999993    AMATUZIO    ALBERT    L                     -- New Sequence Number
  17540300    AMARONE    JOSEPH    J
  17540300    AMARONE    JOSEPH    

  Thank you
  
  Published by: new learning June 7, 2012 14:12

  I do not understand what does this line:

  FIRST_VALUE (fn_get_person_id) - sequence to function

  I feel that the only difference with my query is to select distinct values, do not consider duplicates. Correct me if I'm wrong.

  For me, this should give the same result as your query:

  WITH NAMES AS ( /* Scenario1 -- Three dirrerent people so assign Three diffrrent ID, keeping 1 id as is and assign two
  new ids from sequence*/
                 SELECT   47540310 ID,
                          'WO' LAST_NAME,
                          'ROBERT' FIRST_NAME,
                          'C' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   47540310 ID,
                          'WO' LAST_NAME,
                          'ROBERT' FIRST_NAME,
                          'C' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   47540310 ID,
                          'WO' LAST_NAME,
                          'ROBERT' FIRST_NAME,
                          'W' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   47540310 ID,
                          'WO' LAST_NAME,
                          'ROBERT' FIRST_NAME,
                          'X' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 /* Scenario2 NULL can be equal to any value if there is only one value to equate with
                   In the below case we have two values that can equate with null so assign three diffrent ids */
                 SELECT   47540300 ID,
                          'AMATUZIO' LAST_NAME,
                          'ALBERT' FIRST_NAME,
                          'J' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   47540300 ID,
                          'AMATUZIO' LAST_NAME,
                          'ALBERT' FIRST_NAME,
                          NULL MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   47540300 ID,
                          'AMATUZIO' LAST_NAME,
                          'ALBERT' FIRST_NAME,
                          'L' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 /* Scenario3 NULL can be equal to any value if there is only one value to equate with
                   In the below case we have ONE VALUE  that can equate with null so DONT ASSIGN ANY IDS*/
                 SELECT   17540300 ID,
                          'AMARONE' LAST_NAME,
                          'JOSEPH' FIRST_NAME,
                          'K' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   17540300 ID,
                          'AMARONE' LAST_NAME,
                          'JOSEPH' FIRST_NAME,
                          'Y' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   17540300 ID,
                          'AMARONE' LAST_NAME,
                          'JOSEPH' FIRST_NAME,
                          NULL MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   17540300 ID,
                          'AMARONE' LAST_NAME,
                          'JOSEPH' FIRST_NAME,
                          'M' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   17540300 ID,
                          'AMARONE' LAST_NAME,
                          'JOSEPH' FIRST_NAME,
                          'M' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   99999999 ID,
                          'LO' LAST_NAME,
                          'CHRISTY' FIRST_NAME,
                          NULL MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   99999999 ID,
                          'LO' LAST_NAME,
                          'CHRISTY' FIRST_NAME,
                          'M' MIDDLE_NAME
                   FROM   DUAL
                 UNION ALL
                 SELECT   99999999 ID,
                          'LO' LAST_NAME,
                          'CHRISTY' FIRST_NAME,
                          'M' MIDDLE_NAME
                   FROM   DUAL),
   sel_names AS (  SELECT id
                            , last_name
                            , first_name
                            , middle_name
                            , COUNT (middle_name) OVER (PARTITION BY id ORDER BY middle_name) cnt
                            , ROW_NUMBER () OVER (PARTITION BY id  ORDER BY middle_name) rown
                         FROM (SELECT DISTINCT * FROM names) -- use SELECT DISTINCT here to remove duplicates
                     ORDER BY 1, 2, 3, 4
                     )
  SELECT 8888888 new_id, id, last_name, first_name
       , middle_name
    FROM sel_names
   WHERE cnt > 1 AND rown > 1;
  

  As you can see I have just replace the table with a view of inline using SELECT DISTINCT *.

                         FROM (SELECT DISTINCT * FROM names) -- use SELECT DISTINCT here to remove duplicates
  

  For the new id I put a dummy value 888888, you can use a function or sequence according to your needs.

  Kind regards.
  Al