Please help, failed to install new graphics card

Similar Questions

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

  In order to improve my graphics performance for games that I invested in this graphics card:

  NVIDIA gtx 950, links shows the map and specifications:

  http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/

  How fitting the screen stops at initial HP logo and "press ESC to start menu.

  I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.

  I am running Nvidia GT 630, and back on this card machines works well again.

  It just loks like the new graphics card prevents the hard drive to run.

  All attached cables (power cable 6 pin) and locked firmly into the PCI slot.

  Is it possible that the new card draws so much power that it prevents the hard drive of the race?

  When you press ESC, it seems that the hard drive is registered in the Bios.

  This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.

  http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950

  *

  First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.

  Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.

  If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?

  http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1

  or this

  HP Pavilion Desktop-500-585no

  Thanks in advance

  I'm not familiar with current PC for sale, regarding upgrades.  Since is considered a new HP, try looking at the list of options on the HP website.  Most higher end PC have the options that you choose before buy you, to customize the generation.  Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later.  OR go with a customized version, but this could mean significant spending.  It is the hand off the coast between prebuilts and personalized.

• No sound after installing new graphics card

  Original title: sound problems, this can be confusing abit.

  OK, so today I have installed a new graphics card, NVIDIA, comes with 2 VGA Plug ins and a MiniHDMI.
  Once I installed it, my sound thing said, exit No Audio is installed, so I reinstalled it, but for some reason any... He sends the sound via HMDI cable, but I did not! I used to have "Realtek HD audio", so I went on the website to download, got one, but has no effect! Please help me!

  Too bad... It's okay now, thanks anyway, I got it to work.
  PS, I never siad anything on an error message.

• Windows 7 Installation stuck after installing new graphics card

  Before that, my office is fully compatible with Windows 7, but after that I installed a new graphics (ATI Radeon HD 5450) I can't install Windows 7, when I started to install that everything seems fine, but after it restarted and end Installation it just stuck there!

  Any help?
  I tried to remove the new graphics card and the use of the onboard graphics to install Windows 7 still does not work?
  NOTE: I used Windows XP before installing the new graphics card.
  I'm using Acer Aspire M1800
  CPU: Intel Pentium E6300 processor
  Memory: 2 GB DDR2
  Help appreciated
  -Joey

  Hello Joey

  If right now you go back to Windows XP and the system is slow correct? You have the drivers installed since you went back to XP? If not then click here and select your system. This will bring up a list of available drivers for you. Also, I've included a link below to get the drivers for your new video card. My problem with the question is if your system has enough power to support the video card. Here are the specifications of your card. Check the configuration required for the map and you ensure that you have adequate food. Let me know if it helps. Thank you.

  ATI Radeon HD 5450 Windows XP Drivers

• Stuck on the HP logo screen after installing new graphics card.

  I installed a new graphics card today and I'm stuck in the loading screen. My old card boots gts 450 my computer very well, but my new graphics card cannot. I replaced my old diet with a 600w power supply, and it worked fine with my old card.

  It's my computer HP Pavilion h8-1210 = http://www.amazon.com/HP-Pavilion-HPE-h8-1210-Desktop/dp/B006VG0HNM

  I tried to install the latest version of the Bios with no luck. I guess it is the motherboard, but I'd be happy to work around that.

  Danny

  metall909,

  If you use an EVGA 760, so your question is probably a vbios into the video card.

  HP PC delivered after November 2012 are pretty good at speed on the last level of UEFI version. This level begins to version 8.

  I met problems with EVGA 760 UEFI and ASUS claims it is a vbios video card problem and EVGA says this is a motherboard problem.  I would not recommend using this card until EVGA releases an update of the vbios.

  If you are in a situation of pointing finger between HP and EVGA.

• No audio after installing new graphics card

  I recently installed a Geforce 8800 gt xfx graphics card. After you install the graphics card, I have more audio analogue. My computer does not detect the analog audio devices. Things I've tried: reinstalling the drivers chipset audio activation built into the bios bios reset CMOS reset reinstallation Editing registry. PC specs: http://support.hp.com/us-en/document/c02628226 (Note: all specifications listed are correct except the video card and power supply) voltage is the 450w graphics card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280

  Yes, it is possible, that there is an overload.

  The solution is to get a sound card not cheap, I think.

  One that works with everything what add on slots (PCI/PCIe x 1) you have.

  Then get a Radeon HD6570 (didn't need additional power supply), or some other card Radeon HD if you wish.

• HP ENVY PHOENIX h9-1355: hard drive not detected after installing new graphics card?

  My computer at starup tells me that it cannot detect my hard drive after installing a new graphics instead of my old card.

  The news is ASUS GTX 960 old Turbo was AMD Radeon HD7770.

  Can someone please help!

  Please, I beg you!

  See your other post.

• Get the 43 pilot error after installing new graphics card

  Original title: graphics card problem

  Help, please. I just put in my new nvidia Geforce GT 430 graphics card. It came with a disc that would install all necessary records, when the computer has restarted a message says that the driver has been arrested because of his mistake, 43. I don't know what to do to solve this problem. just in case my processor CPU Intel Celeron D 3.33GHz and has a 32-bit operating system. What should I do?

  Hello

  / Settings (BIOS/CMOS) often F2 as you start so watch the display as you start
  the computer. You may need to check with the system manufacturer (Motherboad support
  If a system custom Maker), their documentation online and drivers and ask for their
  Forums (if any).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP PAVILION HPE h8-1192d: could not start after installing new graphics card

  I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!

  Hello

  NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC.  The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card.  You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.

  

• blue screen after installing new graphics card

  Just install my new geforce gt 240 to replace my 9400gt. After reinstalled vista driver & restart, my system to start start then goes to a white screen for 2-3mins fight & displays a blue screen quickly and then restart & repeat once again. Vista will boot into safe mode without problem & also start normally when I reinstall my old card. my system is fully updated & all drivers are up to date.

  A way to solve this problem

  Thank you very much for the help, discovered that the graphics card was defective. Tested my friends GT 220 card in my system & installed without any problems. Anyway, I picked up the card & brought a radeon HD5450 instead, installed without a problem, then I say problem solved.

  Thanks again wb2001

• Please help trouble Code 43 error graphics card for XPS 8700 (as well as the disappearance of sleep/Standby Mode) (Windows 10)

  I got my XPS in 2014 and my warranty of service completed in 2015 Jan before I installed Windows 10. So since I've upgraded to Windows 10 I started having problems with by XPS 8700. Now, I have no guarantee. I thought he would go better once they have released an update of the BIOS and it did for a while unfortunately in recent months, I noticed two major issues.

  (1) upon the starting and restarting my computer, my monitor does not end up receiving the signal from the computer and remains dark.

  -Checking that it is not a problem with the monitor by testing with other computers

  -J' checked in the Device Manager and there was a next yellow alert for graphic cards / NVIDIA GeForce GT 635

  -By clicking on, he showed me this: Windows has stopped this device because it has reported problems. (Code 43)

  Unfortunately, it is not the only problem with the graphics card.

  (2) "sleep" my mode is gone (it is related to graphics and BIOS).

  -J' tried the go in power to add setting but it was not yet listed.

  -I went to the command prompt and looked powercfg.exe that's what I discovered:

  C:\Windows\System32>Powercfg - a

  The following sleep States are available on this system:

  Hibernate

  Quick start

  The following sleep States are not available on this system:

  Standby (S1)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S2)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S3) mode

  An internal system component has disabled this standby state.

  Graphics

  Eve (S0 low idle power)

  The system firmware does not support this standby state.

  Hybrid sleep

  Standby (S3) mode is not available.

  Now I really wish I could start or restart my pc without staring at a blank screen and the problem of code 43 with Nvidia GeForce GT 635. Also, I would if I could have the option to upgrade my PC to sleep. I really miss it and do not have to constantly reboot my computer to be able to see anything on the monitor.
  

  I hope someone can help me with these questions without having to reset the pc and reinstall, all over again, that the problem still exists in other cases (I don't have a copy of the installation of programs pre-installed dells so...). This computer is only 2 years old, it didn't need to be retired.

  NVIDIA GeForce GT 635 (PCI\VEN_10DE & DEV_1280) the card is physically wrong and needs to be replaced.

• Computer does not start after installing new graphics card

  HP-envy h8-1503
  I7 - 3770 k 3.5 GHZ
  10 GB of Ram
  Windows 8.1
  
  I tried to install a new edition of diamond Raedon 7770 to replace my old 7570 and when I try to start the computer I get 6 long beeps and the power light flashes 6 times. Everything is plugged in right and the video card turns on. It will not be output to the screen tho and the computer does not start!

  I fixed it, the problem was the safe boot in my bios, when I disabled the system booted and worked perfectly since! Thanks for the advice tho!

• Computer does not start after installing a new graphics card

  I am owner of a HP Pavilion H8-1020 with a processor intel i7 - 2600 s Windows 7 and am trying to upgrade my Radeon hd 6570 to a Gigabyte AMD Radeon R9 280 OC. I improved my diet for a Corsair CX750 to meet the requirements of power and installed with number. After the installation of the new card, which as far as I can tell is well seated in the pci slot and correctly connected to the PSU, my computer does not start.

  System powers on, all fans of begin to run including the fans on the new graphics card, but it does not begin the boot process, no entry is received at my monitors, no light on the keyboard, my OS starts loading, I can turn off the system without the delay that will flow normally. Then I reinstalled my old graphics card and the computer started as usual.

  Now, assuming that the card is not DOA, which unfourtunatly I have no way to verify, and I'd like to see if it could be another problem before going through the process of restitution. I did some reading on the internet, which helped, but did not help for a technological neophyte like me.  Now, I know a few things that could cause this problem but lack the necessary skills to determine what question is making me. What I've read, these could be possible questions:

  1: my new graphics card is not compatible with my motherboard. It's something I know now that I should have checked before buying and something I should theoretically be able to do it now, but I am at a loss on how to do it. My card is compatible with my motherboard?

  2 could be a BIOS problem. I updated my bios driver with the version provided by the HP site. I am running FRIEND 7.16 05/10/2011.  And from what I've read it might have something to do with my bios to UEFI mode and I would need to go to a legacy mode so he can recognize a new device, is it true? I am extremely wary of messing with my BIOS settings for fear of bricking my system. How can I check my current BIOS settings are and what I should change and how would approach I change them? Will one of these changes affect my system if they are not what is not causing the problem?

  In addition to these issues, anyone know any other matter which may be the cause of the problem that I should look for? Thanks for any help.

  Hello @Eric_Z,

  I can see why you are having problems with your new graphics card, and to get to the fast response that your motherboard is not compatible with the new graphics card that you have purchased. And here's why.

  Your motherboard according to the page HP Pavilion HPE h8-1020 Desktop PC product specifications is the Carmel motherboard, which has the following expansion slots:

  • A PCI Express x 16
  • Three PCI Express x 1 connectors
  • A PCI Express Mini Card x 1

  As there is no version indicated for your PCI Express x 16 it slot means that it is version 1.

  Now, your previous graphics card was a PCI Express 2.1 x 16, which means that it was version 2 and compatible with your PCI Express x 16 slot on your motherboard. However, the new card is PCI Express 3.0 and will not work in your motherboard due to a compatibility break. While the technology is supposed to be compatible there are many cases where it is not, and I'm afraid that you meet one of these cases.

  I am offering an overclock.net article entitled: the final answer to the controversial compatibility of PCIe x 16 version. where your situation has been tested and examined.

  I hope this helps. Have a great day and thank you for display on the HP Forums!

• Is satellite A10 - possible to install the new graphics card?

  Hello

  I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer.

  I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intro screen and then hangs when it is ready to go into the Menu. My first impressions are that I don't have a pretty good graphics card.

  I need a 32 MB T & L capable card so can someone confirm if this is why it would not work on the system.

  If that's the case I'm looking to see if it is possible to install a new graphics card on the machine I want to play more games to date.

  the map I'm looking at is Sapphire ATI Radeon 9600 XT 256 MB AGP8X graphics card. It will work on the machine and it is likely to solve my problem?

  Thank you

  HI Jeff,

  In General, it is not possible to change the graphics card in your laptop. This is because the graphics cell are generally not a component separated (as with a normal PC), but generally a specific graphic chip attached to the motherboard so make the graphics a part of the laptop.

  At the same time, the graphics driver is normally a specially modified version will omit some of the more esoteric aspects of the normal driver to minimize the risk of overheating chip since it does not have its own cooling system. Given this, you will find probably than trying to load the latest graphic website manufacturers drivers (Nvidia, ATI, etc.) will not work, and you will therefore be limited to these pilots provided by Toshiba on their Web site.

  In order to get your copy of the SIMS 2 to run you need to omit or reduce some of the graphics settings in the game itself, or alternatively, you can try to use some of the graphics third-party drivers that are written to provide some of the omitted features of the original notebook drivers. Note that if you do that there is no guarantee that they won't cause your overheating graphics chip, even if I used the ATI Omega drivers for some time now without any problems. You can get them: -.

  http://www.OmegaDrivers.NET/

  Kind regards