Please help me fix Microsoft Security Essnstials

Similar Questions

• When I try to defrag, a window opens and closes and a file download-security warning. A loop repeats. Other programs to do the same thing. Please help me fix this loop? SOS?

  When I run defrag, an IE window opens and closes and a file download-security warning comes up and asks me to run or save the file name: c:\windows\system32 dfrgui.exe, if I hit then another warning of IE - sec stands up and says 'the Publisher could not be verified. Are you sure that you want to run. I struck and the loop repeats. I run a diag of the F10 boot menu with dell. They say that its software and non-material, pay! Microsoft says that Dell is responsible. Other programs to do the same thing. I've updated and rerun my AVG security without error. We are automatically updated, and no other programs were added. Please help me fix this loop? SOS?

  Vista - open file - security warning
  http://www.Vistax64.com/Vista-security/125044-open-file-security-warning.html

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Your programs launch properly from Safe Mode?  Or Normal Mode if you create another user to test with?

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Please help me fix the script

  I try to write a script by my slef but not work

  app.findGrepPreferencest = firstLineIndent:8, leftIndent:8;

  app.changeGrepPreferences = firstLineIndent:8, leftIndent:16;

  app.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  Can someone please help me fix the script, please.

  Hello

  Try this.

  app.findGrepPreferences = app.changeGrepPreferences = null;

  app.findGrepPreferences.firstLineIndent = '8 ';

  app.findGrepPreferences.leftIndent = '8 ';

  app.changeGrepPreferences.firstLineIndent = '8 ';

  app.changeGrepPreferences.leftIndent = "16pt;

  app.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  Kind regards

  Cognet

• Please help me fix my script!

  Please help me fix my script

  I use this script that copy from the adobe forum:

  app.findGrepPreferences.findWhat = "\\r";

  app.changeGrepPreferences.changeTo = "\\r\\r";

  app.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  to change my back one or two, but it will always change all my documents.

  How can I tell the script that I only want to change the selection?

  Hello

  Note the syntax ==> target changeGrep()

  If the target is app ==> it runs through the entire application of the ways each open document

  If the target is doc ==> it runs through all doc

  It can be called for textFrame, story, paragraph..., any text object.

  In your use case

  App.Selection [0] .changeGrep ();

  or browse the selection and appeal

  App.Selection [i] .changeGrep ();

  Jarek

• Please help me reach Microsoft to activate my Vista software...

  Need to do a clean install on my 3 yo laptop ASUS with Windows Vista.  The activation code does not work, probably b/c, it still considers that it is installed on my computer, it is not because I formatted the drive and try to reinstall.  There is apparently no way to get phone support to activate this software (computer/properties does give me not an option for activation of the phone, only the internet, which breaks down) - Please help.

  Need to do a clean install on my 3 yo laptop ASUS with Windows Vista.  The activation code does not work, probably b/c, it still considers that it is installed on my computer, it is not because I formatted the drive and try to reinstall.  There is apparently no way to get phone support to activate this software (computer/properties does give me not an option for activation of the phone, only the internet, which breaks down) - Please help.

  Never mind.  Finally found the phone activation window - it was a popup, don't know what I did to make it popup, but after entering one have numbers my VISTA is activated.

• Please help me fix this SQL query...

  Hi, please consider following:
  create table test (col varchar2 (255))
  insert into test values ("TERM").
  Insert test values ("VOLUME");
  
  Select the test pass where pass in ('TIME', 'VOLUME');
  This property returns the rows.
  
  but my input string is a comma-separated list:
  DURATION, VOLUME
  
  so I try
  Select the test pass where col to (replace (' DURATION, VOLUME, ',' "'," '));
  but no result. Or:
  Select the test pass where col in ("' | replace (' DURATION, VOLUME, ','" ', "') |") ') ;
  
  However
  Select "' | Replace (' DURATION, VOLUME, ',' "'," ') | " ' the double
  gives "DURATION", "VOLUME".
  
  then why does it work?
  
  hope you can help. Thank you

  convert stringlist in lines and then use in the clause...

  SELECT col
     FROM test
    WHERE col IN
    (SELECT    *
       FROM
      (SELECT TRIM( SUBSTR ( txt , INSTR (txt, ',', 1, level ) + 1 , INSTR (txt, ',', 1, level+1 ) - INSTR (txt, ',', 1, level) -1 ) ) AS token
         FROM
        ( SELECT ','||'DURATION,VOLUME'||',' AS txt FROM dual
        )
        CONNECT BY level <= LENGTH(txt)-LENGTH(REPLACE(txt,',',''))-1
      )
    )
  

  Ravi Kumar

• Vista hangs on the second sleep - please help to fix it!

  All, in short, my laptop goes to sleep very well after starting, CV OK but when go to sleep for the second time, it crashes before entering the sleep state. Then I turn off keep the power button down for several seconds and turn it back on.

  Now the details:

  The laptop is a Compaq Presario F506la and I just installed from scratch the factory OS: Windows Vista Home Basic Edition. SP2 is installed and all Windows update packages are installed correctly too. Latest driver from the manufacturer for all devices are installed including sound, video, chipset and network drivers.

  The problem can be reproduced as follows:

  -Turn on the computer and wait until everything is running. No CPU activity or a disc more.

  -Press the sleep button. The laptop turns off the screen, the wireless, the drive, the CPU fan and goes with success in the standby state (S3). The lights flash to correctly report that the laptop is in sleep. The system displays event log the power of the same kernel 42 confirming the system is entered mode 'sleep'.

  -After a certain time, by pressing the power button or the keyb jolt to the system. Everything is normal. The system event log shows Power-convenience store event 1 date and time to sleep and wake events.

  -A few minutes later, press the sleep button again. The laptop turns off the screen and the disc but keeps running CPU fan and lights always. By pressing the power button, any key or mouse do nothing. Several times, the CPU fan starts to run faster after a certain time, as when the processor is very busy and need extra cooling.

  -After that keep the power button pressed for a few seconds, the system turns off. Press it it lights and after selecting "start normally" on the "windows did not close properly" splash screen, I can see the system event log shows error EventLog 6008 (unexpected restart) and the error critical Kernel - Power 41 (last transition sleep was incorrect). The rest of the log entries show no significant information to look for the cause. There is no image memory either.

  I tried to turn off all devices (except the video driver because without it, active sleep option is not available), do a clean boot using msconfig.exe, but the problem is still there. I don't want to just disable the sleep of the power configuration option. That's cheating! ;)

  How to trace the issue of the cause? Is it possible to increase the logging level to identify the cause of the problem? Please advice!

  Thank you!!!

  All, in short, my laptop goes to sleep very well after starting, CV OK but when go to sleep for the second time, it crashes before entering the sleep state. Then I turn off keep the power button down for several seconds and turn it back on.

  Now the details:

  The laptop is a Compaq Presario F506la and I just installed from scratch the factory OS: Windows Vista Home Basic Edition. SP2 is installed and all Windows update packages are installed correctly too. Latest driver from the manufacturer for all devices are installed including sound, video, chipset and network drivers.

  The problem can be reproduced as follows:

  -Turn on the computer and wait until everything is running. No CPU activity or a disc more.

  -Press the sleep button. The laptop turns off the screen, the wireless, the drive, the CPU fan and goes with success in the standby state (S3). The lights flash to correctly report that the laptop is in sleep. The system displays event log the power of the same kernel 42 confirming the system is entered mode 'sleep'.

  -After a certain time, by pressing the power button or the keyb jolt to the system. Everything is normal. The system event log shows Power-convenience store event 1 date and time to sleep and wake events.

  -A few minutes later, press the sleep button again. The laptop turns off the screen and the disc but keeps running CPU fan and lights always. By pressing the power button, any key or mouse do nothing. Several times, the CPU fan starts to run faster after a certain time, as when the processor is very busy and need extra cooling.

  -After that keep the power button pressed for a few seconds, the system turns off. Press it it lights and after selecting "start normally" on the "windows did not close properly" splash screen, I can see the system event log shows error EventLog 6008 (unexpected restart) and the error critical Kernel - Power 41 (last transition sleep was incorrect). The rest of the log entries show no significant information to look for the cause. There is no image memory either.

  I tried to turn off all devices (except the video driver because without it, active sleep option is not available), do a clean boot using msconfig.exe, but the problem is still there. I don't want to just disable the sleep of the power configuration option. That's cheating! ;)

  How to trace the issue of the cause? Is it possible to increase the logging level to identify the cause of the problem? Please advice!

  Thank you!!!

  Looks from material for me! probably try system restore if it happened after you install something or recently or LastKnownGood where choose to go in safe mode!

  Also make sure your system is clean.

  http://www.Malwarebytes.org/

  http://www.systweak.com/AntiSpyware/

  http://www.Avira.com/en/download/index.php

  http://www.SurfRight.nl/en/downloads/

  Use http://www.filehippo.com/download_ccleaner to get rid of the junk files on your pc!

  also try to check your disk for error and the disc of preform defragment and clean!

  Try the sfc/scannow via cmd run as admin

• Please help to fix what I did a upgrde to apex, but when I try to call the new image:

  SQL > @apxldimg c:\apex46

  Start

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Now you did again the name of the script. It is apxldimg

  Please pay more attention on what you type. Otherwise, the communication with SQL * Plus will be much like "garbage in, garbage out."

• Can not play big fish games after installation of Microsoft security essentials

  OT: Big Fish Games

  I just installed the microsoft security essentials and I started to play a game on big fish games but a message came and now I can't play the game can anyone help how can I please allow programs on mse

  Hello

  Please try to uninstall Microsoft Security Essentials and check if you are able to play games on Big Fish.  If necessary, please try to perform a system restore to restore your computer to a date and a time earlier.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The administrators password was interrupted due to a separation of the employee, now I have as an administrator. can't make the necessary changes Please HELP

  The administrators password was interrupted due to a separation of the employee, now I like admnin. can't make the necessary changes Please HELP

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• Please help: instruction box - ORA-01722: invalid number error

  Hi all
  I am trying to use the Case statement to recode the status canceled in two groups
  "Reject" If the difference between the date of the first and the last date is less than 29 and
  'Accept' if the difference between the date of the first and the last date is greater than 30
  
  Here's my data 'test'
  
  STATUS FIRST_DATE LAST_DATE
  
  Transfer / / 10/08/2011-10/09/2011
  Mover 10/08/2011-15/09/2011
  Cancel the 16/09/2011 10/08/2011
  Cancel the 10/08/2011 5/09/2011
  
  Here's the syntax
  
  Select a.*,
  (CASE WHEN a.STATUS = 'Cancel' CAN (round(a.LAST_DATE-a.FIRST_DATE))
  0 OTHERWISE
  END CAN_DAYS),
  (BOX WHEN "CAN_DAYS" > 29 THEN "reject"
  WHEN "CAN_DAYS" < 30 THEN "accept."
  Reject_Accept END)
  try one
  
  The first CASE statement works very well and gives me this
  STATUS FIRST_DATE LAST_DATE CAN_DAYS
  
  Transfer 0 10/08/2011-10/09/2011
  Mover 0 10/08/2011-15/09/2011
  Cancel the 37 16/09/2011 10/08/2011
  Cancel the 26/10/08/2011 5/09/2011
  
  but the LATTER product ORA-01722: invalid number error. It's something to do with the type of data CAN_DAYS, Oracle does not see in the Numeric form I think.
  I want to see result
  STATUS FIRST_DATE LAST_DATE CAN_DAYS Reject_Accept
  
  Transfer 0 10/08/2011-10/09/2011
  Mover 0 10/08/2011-15/09/2011
  Accept to cancel 37 10/08/2011-16/09/2011
  Refuse to cancel the 26/10/08/2011 5/09/2011
  
  Could someone please help me fix the syntax?
  Thank you in advance,

  Hello

  The error is due to the fact that you are trying to compare "CAN_DAYS", which cannot be regarded as a number, a number.
  You can try this option for your results:

  select A.STATUS, A.FIRST_DATE, A.LAST_DATE,case
                                              when a.status ='Cancel' then round(a.last_date - a.first_date)
                                              else 0
                                              end as can_days,
                                              case
                                              when (a.status ='Cancel'  and round(a.last_date - a.first_date) > 29) then 'Reject'
                                              when (a.status ='Cancel'  and round(a.last_date - a.first_date)< 30) then 'Accept'
                                              else null
                                              end as Accept_Reject
  from test a 
  

• No sound in flash player don't please help = S

  title and summary says it all, please help me :)
  < edit >
  fixed, it don't you worry
  < / Change >

  title and summary says it all, please help me :)
  
  fixed, it don't you worry
  

• The Microsoft Security Alert shield is red in the section of the taskbar notifications. Help, please!

  The Microsoft Security Alert shield is red in the section of the taskbar notifications. I opened it and it says virus protection is turned off and "Microsoft Security Essentials reports that it is turned off. Checked with Microsoft Security Essentials and it says computer is protected. What should I do? Thanks for help!

  The Microsoft Security Alert shield is red in the section of the taskbar notifications. I opened it and it says virus protection is turned off and "Microsoft Security Essentials reports that it is turned off. Checked with Microsoft Security Essentials and it says computer is protected. What should I do? Thanks for help!

  I'm guessing that you're referring to a problem involving the Security Center that happens sometimes after update silent through updates of Windows to the new version of MSE... but it is also sometimes occurring after the updates of Windows 'monthly '.  Usually, but not always the problem occurs on computers running XP.

  If the MSE icon is green then you should be protected and cannot ignore this Security Center warning. The problem resolves after a few days.   I do not pretend you disable the protection in real time on MSE, disable Security Center, restart the computer and then turn everything back on and restart once more... some users report this sequence fixed the problem.

  BUT

  You may want to consider the following threads:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Ive-Windows-essential-and-is-showing-me-my-PC/c76fc125-c21f-46a9-8B9F-c9b1311171b1

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_updating/Security-Center-message/558e1220-9f21-4e6c-Be92-ddcc65d36c0c

• Please HELP Microsoft Visual C ++ Runtime Error and Microsoft Security Essentials

  I don't know where to post this option for assistance. A couple of weeks, I started to have problems with Microsoft Security Essentials. The program said that it could not turn on real-time protection. This operation returned because the time limit has expired. I followed the instructions to restart by typing services.msc, then click start to start the service by choosing Microsoft Antimalware Service, properties, choose automatic or stop, and then start. It wouldn't be long before the service stops again. I did 2 restorations system. One of the dates worked briefly, the other did not work at all. It still would not begun.

  Now, I get the following message: Microsoft Visual C ++ Runtime LIbrary, this application has requested the execution in an unusual way. For more information, contact the application support team. There is no location in this message, and it appears once the computer is completely closed and powered up. I have to start it in safe mode, or I am totally unable to get windows sign in screen. Once I start it in safe mode, I, once again, am responsible to activate the time protection real Microsoft Security Essentials. More often then not I can't turn it on at all. When I am able, it isn't long before that I'm right back where I started, could not start windows normally.

  Help, please. Thank you

  Have you tried to uninstall and reinstall Microsoft Security Essentials?

• I can not turn on microsoft Security Center as it wont let me could you help please

  I would like help in the marketing of microsoft Security Center, because it won't let me turn it on and my computer is not protected I don't know why he used I barely noticed the problem and would appreciate any help to rectify the problem.

  How to enable Windows Security Center...

  Start button > in the search box, type Services> press the Enter key > scroll down to find the Security Center, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic (d...
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select Automatic (delayed start)
  the service status, click start
  Click OK when finished.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.