PLEASE HELP ME! I have a small window and it will not close... how he close?

At the top of the window, it reads: CUccPlatform: msnmsgr.exe - bad Image.

In the window, it reads: C:\Program Files\MyWebSearch\bar\2.bin\F3REPROX. DLL is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.  I can't afford to call Toshiba for help.

Hello

MyWebSearch is wth normally associated with malware

Download update and scan with the free version of malwarebytes anti-malware

http://www.Malwarebytes.org/MBAM.php

You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

http://www.bleepingcomputer.com/download/anti-virus/rkill

If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

Windows Vista

Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

Tags: Windows

Similar Questions

  • I OPTED ON promotions (and 2 others, the third won't let me her behind her window) and it will not shut - how can I disable it forever?

    You have an opt-out option.
    THIS disengagement option has an option to always.
    IT DOES NOT WORK.

    I have never chosen on the beast) (& * % ^ * & () * ^ tab which is located in the MIDDLE OF MY SCREEN, covering a THIRD of my screen (and 62 cm - it was during the slaughter!)) ... IN CASE OF FAILURE. (at least 4 times)
    I have a dout opts for always under the stupid tab on the side OF my screen... IN CASE OF FAILURE. (at least 8 times)
    I am unable to withdraw for always in the tab that appears at the bottom of my screen, as it appears from the opt-out options BEHIND the window I want to withdraw forever from the. (I call this EPIC fail).

    When I read a story on the line, I DO NOT WANT to STORE. If I'm shopping in the Amazon for a book, I will read this book. IT IS BORING to HAVE to CLOSE OUT WINDOWS EVERY TIME I RESEARCH for a NEW BOOK - consider that I search/buy about 15 books at a time - after checking maybe 50 opening on TOP of these tabs.

    I also want to get rid of her notes with the arrows green circle thingy that open pop-up windows up if I mouse over them. (there are 3 of them under this box, I type as I type, and pushing the mouse away widened at least 4 stupid windows pop up - which I blocked pop ups in the options... then WHY?)

    I realize this can not fixed on the spot, as it is going to require a real programmer to fix, but please, pass this up to or more than that CAN fix. I have used firefox since before patch 4 after it went live. I LOVED the old "you're F * d (etc." page you used to have that directly opposes internet Explorers page not found - and I actually had the time to read and had a terrible time stopping laughing (at work of all places) when I did it. I don't want to change browser, but these * features * do not Captivate me--especially since * features * should be optional, and turn them off should work.

    Thank you for your help and I hope you have a good day/evening and horribly painful is more people like me. < 3 x o

    Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of. Check your modules is:

    • Tools > Add-ons, or
    • > Modules

    Remove all the extensions that appear to be suspicious.

    I recommend that you try to scan with MalwareBytes or AdwCleaner

    More information can be found in the article troubleshooting Firefox problems caused by malware .

  • Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

    Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

    Start with a utility cd and change the partition Active. If you scroll down on the page and get > CD Bootable and > ImgBurn to burn the iso image to cd, a guide on the use of ImgBurn to write an ISO on a disc is > here. Once created, boot from it.

  • I received the email from microsoft, but I don't think that's the real e-mail, I've pasted below, can you please help me I have marked as spam and deleted. Thank you.

    From: * e-mail address is removed from the privacy *.
    Subject: UPDATE ACCOUNT 2012(LAST WARNING)
    Date: Tuesday, July 24, 2012 12:22:14-0400

    Welcome to Hotmail
    The effective way of the email
     

    Dear user,

    This message is to inform you that your account is not active in our database. Because of the unusual connection of unknown places of IP attempt. You are to fill out the form below, such as requested, in order to avoid your account permanently closed within 24 hours after this notice. Our goal is to provide you with the best possible service, especially when it comes to protecting your account.

    Enter the following information:

    User name:
    Password:

    Date of birth:
    Territory / country:

    NOTE: This is the last time that you will receive the notice and the windows! will not be held responsible for any damage that may result from the non update of your account. If you have updated your account, please ignore this message.

    NOTE: Click on answer before you fill out the required information
    YOUR DETAILS WILL NOT BE SHARED.
    We will continue to work on the contribution of Windows Live! the best email service autour and we appreciate your joining us for the ride.

    Sorry for the inconvenience,

    Sincerely,
    The Windows Live Hotmail Team
    • Take your emails on the road. Go mobile
    • Chat with your Messenger friends to your Inbox or to download Messenger
    Windows Live
    Microsoft respects your privacy. Read our online Privacy Statement.
    Microsoft Corporation, One Microsoft Way, Redmond, WA 98052-6399, USA © 2012 Microsoft Corporation. All rights reserved.

    TOTAL SCAM!

    Don't answer. Delete this message.

    Microsoft NEVER send unsolicited emails or phone calls to anyone.

    It's just a secular scamming thing. Don't fall for it.

  • Hi well I fight with hp for about 3 days on this so maybe someone here can help me. I have a bunch of updates that will not update how to fix the problem

    When I run a health check on hp I have a full page of items that will not update some goes for updates of windows. but he said that the hp site may be down, or I can't connect. but I called hp and fought with them for 3 days and I'm tired of fighting with them, I have 4 children that I can't afford to pay for something from someone maybe able to help for free.

    Hi Jbarizona,
    Thank you for visiting Microsoft windows Vista answers Forum.
    A. what operating system you use?

    Method 1: make sure that the necessary services are available and running
    For Windows Vista, follow the steps below:
    To ensure that the necessary services are available and running, as follows:
    1. Click Start, type services.msc in the search text box, and then click services.msc in the list programs. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    2. double-click on Background Intelligent Transfer Service.
    3. If the start State lists Stopped, click Start, and then click OK.
    4. double-click on Windows Update.
    5. If the start State lists Stopped, click Start, and then click OK.
    6. double-click on my computer.
    7. If the start State lists Stopped, click Start, and then click OK.
    8. close the Services window and try to install the updates again.
    Note: If the Background Intelligent Transfer Service does not appear in the list of Services, click the following link to view the article on the Microsoft web site and download the update:
    http://support.Microsoft.com/?scid=http%3A%2f%2fsupport.Microsoft.com%2fkb%2f939159%20%2fen-us
    Method 2: Download and install the Windows Update Agent
    1. download and install the latest Windows Update agent. Click on the link below to view the corresponding article on the Microsoft web site:
      http://support.Microsoft.com/kb/949104/en-us
    2. once the Windows Update agent is installed, try to install the updates again.

    Thank you and best regards,
    Vijay - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a pavilion p6130fpc and it will not see the drives.

    I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

    Willman,

    Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

    http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  • I have several firefoxes running, and two more small (approximately 40 KB) will not close. If I don't close them, they open again immediately. How good of them?

    This has happened for several weeks. At first there was just this second as listed in the process Firefox.exe. Two days ago a third appeared. Because I can't close them, I can also make updates.

    Help!

    See http://kb.mozillazine.org/Firefox.exe_always_open

  • Please help, Illustrator has trouble installed at home and I can not...

    fill an object?  I drew a simple square and when I click to add a color, it does not... remains empty, however, the toolbar on the side said that the color I chose is in the object, I just filled?

    Problem # 2... I can't change the same line width... which remains the same as well.

    I've been using illustrator to work for the last 6 months and have not experienced this problem.

    Would be very happy of all boards.

    Thank you!

    No chance that you are using the 'plan' instead of 'overview '?

  • I have Formated my Clip and it will not turn upward.

    Hello!

    I Pluged in my camera to the computer and then I formatted it from the computer!

    BUT!

    When I try to go to the database of device it tells me: Please Plugin device (: G)

    But Windows found the device and it work fine before I formatted it!

    and when I tried to put it up, he said

    "Not enough space for music DB. Please free 30 MB. »

    Help please

    I wish I could... but I try to enter the Sansa it is said to be Formated00...

  • The / r option under stop will stop windows and it will not restart when chkdsk is also in the same batch file

    This batch will be the file windows stop and not restart it with the command chkdsk present.

    OFF @ECHO
    REM FIXDISK. BAT
    CHKNTFS T:1
    C:
    ECHO Y | CHKDSK C: /F > ZERO
    CLS
    ECHO RESTARTING SYSTEM

    SHUTDOWN /r /t 0

    Hello V Trammell,

    Where did you got the script? Do you have it created yourself?

    If you need help with the script, I suggest you post in the forum TechNet in the category ' Forum official Scripting Guy.
    Click here for a link to transfer your question.

    Sincerely,

    Marilyn

  • 10 windows and cs5 will not install updates?

    After the upgrade to windows 10, I installed CS5 and then tried to seize the 12.4 and camera raw updates.  I get an error message: there was a download of this update error try again later... Ive been trying for 2 weeks!  Any ideas?  Thanks, Dave

    Maybe the Windows Firewall or internet security blocking downloads.

    You can try the links on this page:

    http://www.Adobe.com/support/downloads/product.jsp?product=39 http://www.adobe.com/support/downloads/Product.jsp?Product=39&Platform=Windows> & platform = Windows

  • I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

    I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

    You can repair XP or try the following:
    http://support.Microsoft.com/kb/917964
    http://support.Microsoft.com/kb/307545

    TO

    Re - install http://support.microsoft.com/kb/978788

  • improve slow system performance... I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

    . I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

    Each computer has different startup programs - if you if you stop that you need you can turn it back on. See step 5 to turn them off.

    Windows 7 is slow

    (1) unplug all devices such as printers, external hard drives, microphone, webcams etc.

    (2) if the computer has only 1 GB or 2 GB of RAM, try adding more RAM.
    (3) make sure that your drivers are up-to-date.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
    (4) defragment your Windows 7 computer:
    http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

    (5) reduce the start up programs:
    (A) click Start, type MSCONFIG in the search box and press ENTER.
    OK the authorization of user account control and password if necessary
    (B) on the general tab, click Selective startup.
    (C) then change the tabs by clicking on the start tab
    (D) uncheck the programs that you do not want to start when your computer starts (do not turn off your antivirus).
    (E) click OK, and then restart the computer.

    (6) disable some visual effects in Windows 7
    There are a lot of Visual effects that can be disabled safely to speed up Windows 7.
    A. Click Start, right click on "Computer" and select "Properties".
    B. click on "Advanced system settings" in the left pane to open the"System Properties".»
    C. Select the "Advanced" tab from him. Then, under 'Performance', click on 'settings '.
    D. now uncheck all the options that you do not want to use (some options disables Aero).
    E. restart the computer.

    (7) open the resolution of Performance problems
    A. open the Troubleshoot utility of performance by clicking on the button start.
    (B) in the search box, type "convenience store" and then click Troubleshooting.
    C. under system and security, click on search performance issues.

  • have a small window keeps popping up, it is called "document flip".

    have a small window keeps popping up, it is called "document flip" it is boring and I can't find out how to remove or disable any help or info would be appriecated

    You have a Logitech mouse? A quick Google indicates that "document flip" can be a feature of the mouse. If this is applicable, look in your control panel applet mouse to disable document Flip option. MS - MVP - Elephant Boy computers - don't panic!

  • My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my e-mail is _ @_. ___

    My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my email is * address email is removed from the privacy *

    The people who answer questions here are, for the most part, volunteers who have no connection with Microsoft.  Ask your question every two minutes won't get you a faster response.

    Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

    AntiMailware MalwareBytes
    SUPERAntiSpyware

    Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

    Cleaning of printers

    NOTE: If after completing step has the spooler print don't rest not always running after you launched the command "net start spooler", follow these steps

    Open a command prompt window (start > run > cmd > OK)
    Type the following line in the black command prompt window
    dependent on the spooler of sc config = RPCSS
    net start spooler

    If the spooler still will not start, you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

    A. Clean on print jobs pending

    • Open a command prompt window (start > run > cmd > OK)
    • Type the following in the black command prompt window, and then press ENTER after each line

    net stop spooler
    del/q '% windir%\system32\spool\PRINTERS\*.* '.
    net start spooler
    output

    B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Maybe you are looking for

  • Issue of spinning wheel

    Hello. IM using Win 7, 39 FF and FB. When I first load FB using FF, the mouse does not show as a circle of rotation. (it is busy to do something) The second, I click on a photo, a video, or just anything, I get the circle of rotation. Like its trying

  • Firefox does not open using a different account on the same computer

    Firefox does not continue opening to a user account. I have four users using computer and firefox works fine with all 3. It just indicates that the loading is stopped.

  • printer photosmart premium c309g set up failed

    My HP photosmart premium c309g (wireless connected to the network) is visible on my laptop but not on my computer by cable with windows xp, at least not by the HP software I have installed. When I enter the ip address of the printer in my browser on

  • How to mount a polynomial if waveform to XY cluster is present

    Hello. I'm quite new to LabView and I'm getting a huge VI. It is an application of spectrometer. Somehow, I must add a polynomial fit to a graph XY of the final results. But I do not know how to manage cluster, how to separate x and Y of the points o

  • Update service nor does not show flexrio 15.1.1 when I had 15.0 installed

    It is not an appropriate forum for this. Recently, I was installing a PC with LabVIEW, device drivers, etc.. I got 15.0 FlexRIO and NI Update Service has not brought to my attention that FlexRIO 15.1.1 exists.  Had to google and download it manually;