Plug-ins appearing does not in the effects and Preset window

Similar Questions

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• Why apple card app does not show the routes and directions between two places in India in an iphone 6 s more?

  map does not show the routes and directions

  This feature is not yet supported in India.

  http://www.Apple.com/in/iOS/feature-availability/#maps-directions

  In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.

  Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.

  http://www.Apple.com/batteries/maximizing-performance/#iOS

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• MAX does not see the devices and interfaces

  Hello

  Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?

  Kind regards

  Kaspar

  Dennis, as usual, is correct.  Please check if you have installed NI-VISA.  There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed.  The link to this article is below.

  http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument

• Clock-calendar does not maintain the time and date

  The clock-calendar on my laptop does not maintain the time and date after I put it.

  Usually a sign that the bios cmos battery is defective and must be replaced

• The Task Manager does not display the process and tabs, even if the menu can be seen.

  Dear community, I had a serious problem on my task manager. It does not display the process and tabs, although the menu is visible. Also, any time I open a program or system of adjustment, some and especially no option can be seen since there is no specified words.

  Here is a link that you can see a screenshot on my problem.

  http://kepfeltoltes.Hu/121231/592911021Untitled_www.kepfeltoltes.hu_.PNG

  Thanks in advance for your help

  Original title: Task Manager problem

  I managed to solve the problem by looking for alternatives. Apparently, the problem was caused by a dat file (C:\windows\system32 folder called FNTCACHE.) (DAT) I deleted and it worked like a magic. Everything was normal again.
  Deleted it and the work of all the graphical interfaces as it should.

  Thanks for your answer, in any case. I just post the solution here if someone ever faced with such a question in the future.

  Kind regards
  Laszlo

• I can't sync my iPod to Windows Media Player. WMP does not recognize the iPod and I can't drag music files between them

  My iPod is connected to the computer and it works fine with iTunes.  But I can't get the music in Windows Media Player to iPod.  When I try to sync in Windows Media Player, it does not recognize the iPod, and I can drag files from WMP to iTunes or the iPod.

  You cannot synchronize an Apple product in itself using WMP, unless you buy a 3rd party. You must use iTunes.

  See you soon,.
  Jerry

• Why microsoft does not provide the product key for windows 8.1

  I have genuine windows 8 so if Microsoft gives the free update to windows 8.1 store so why he does not provide the product key for windows 8.1 so that we can update to it through disk offline

  If you want to install Windows 8.1 clean, but have only a product key Windows 8, you must install Windows 8.1 with a placeholder key - keys of the placeholder will be not - activate and change your product key for Windows 8 key.

  The placeholder keys are:

  8.1 Windows placeholder - core 334NH-RXG76-64THK-C7CKG-D3VPT
  8.1 Windows placeholder - pro XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB

• Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to force the lightroom Installer to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• Why are my tool fill and sign not appearing is not on the bar and how do I solve this problem.

  Why are my tool fill and sign not appearing is not on the bar and how do I solve this problem.

  Salvation;

  What version of Acrobat or Reader are you using?  When you open the form are the fields highlighted and "complete" without clicking the 'Fill & Sign' tool to open the bar fill tools & sign?

  I suspect that the form that you opened is already ' to fill' so the fill tool & sign just offers you the possibility to sign the PDF and all filling out forms is managed the the Acrobat/Reader native app.  In the view below, I opened a 'Acroform' which is a PDF file that has form fields to fill and so the bar fill tools & sign has only 'Sign' button - it's what you see?

  

  'Fill & sign' tools are to fill PDF documents that have no form fields real (they are flat and not fillable) and is able to add text fields, annotations and signatures for the "flat" PDF

  Thank you

  Josh

• First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  What version of the program do you use?

  What steps do you take to share your video, and what happens when you do?

  Is it only a DVD that will not be out of Premiere Elements, it or will it not exit/share any video size?

• CC of Lightroom does not import the photos and displays an error, backup also fails

  Hello

  I use Lightroom CC on Mac and I try to import images, but Lightroom is unable to do it this time for some reason any.

  During the last import Lightroom does not have the download of pictures and showed me the following notification: "Lightroom has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts.

  As it stops it suggests to the backup catalog files and the following notification appears: "Lightroom could not save the catalog named XXX.". Check your folder permissions, and then make sure you have space on your rear disc and disc from the main catalogue.

  I have 2 TB of disk space available.

  I tried to import the camera and my computer, however it is unable to complete the import in two ways, just that several files have been imported and import fails. In each attempt to import files Lightroom creates temporary files with multidigital names.

  
  

  I restarted Lightroom, then my computer, then attempted to create another backup folder, nothing happens. Please help me.

  Thank you.

  Hi all

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• Install HP does not see the printer in network, Windows DOES. Help!

  Hello

  I am trying to add my HP Officejet k8600dn to Windows 7 (32 bit) so I can scan, but the HP Installer (add device) can not see the printer. The unit is set up by cable to a switch on my network via an ethernet cable. If I go into the menu "Add a printer" Windows, I can install the printer very well. But I have to be able to scan and I don't know what to do.

  Tips on getting functional analysis if the HP software is unable to see my printer? Subnet mask and gateway on the printer are the same for the computer and the printer. I typed the correct IP address in the "Add a device" menu of HP, but he sees not just it. ARRGG!

  Thanks for any help!

  Hello

  I think that there is some confusion because the Officejet k8600dn is only a printer, it is not a multifunction device and does not provide the capability of scanning.

  You can find the specifications below:

  http://support.HP.com/us-en/document/c01287217

  If you have any different model printer, please specify the exact model.

  Kind regards

  Shlomi