The Update Service error OR

Similar Questions

• Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

  Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

  Windows Vista. 32-bit, SP1 and 2

  Long story short, I tried to fix my problem of update windows since the beginning of July 2011.  My computer does not stop when you install updates automatically or manually.  I got a 8024000 error.  A shot an email to Ms support and I received an email quickly with some procedures to do.  I don't have to make these 4 days later.  Here is the part of the email.

  This problem may be caused by the following factors:

  1. the Windows Update service has stopped.

  2 corrupt Windows Update temporary files.

  3. bad Internet connection settings.

  4 corrupted DLL files.

  Step 1: Check the services concerned of the update of Windows

  1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on the service "Windows Update".

  3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

  4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

  I completed this step.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Make sure it is said that he has been arrested with success.  OK, it worked.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

  8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

  It did not work.  I received a message...

  The syntax of the command is

  NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

  C:\Windows\System32>_

  I tried again from the beginning and now get the following error: NET HELPMSG 3521

  "MS supports has not returned my emails to the technology or the Manager.

  Can someone help me?  Please notify.  Suzzz-Q

  There are many other measures that followed the foregoing.  If anyone is interested in reading all of this...

  Step 3: Component of Windows Update registry

  ============================

  1. click on the "Start" button, click "All programs" and click on "Accessories".

  2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Enter the following command and press ENTER.

  REGSVR32 WUAUENG. DLL

  You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  4. then please proceed to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

  How to capture a screenshot

  ======================

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  Hello

  Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

  Method 1:

  To resolve the error 8024000 follow the steps in the link and check if it helps.

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

  Method 2:

  See also article on the resolution of the problems with the installation of updates and check if this may help:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• HP Laserjet Pro400 M401dn: the 49 Service error

  Error 49 Service on screen touch printer. Will print no from a Microsoft Office document.

  Have followed the instructions (by HP support) to close printer, unplug the USB and disconnect the power supply to the power surge suppressor and then plug the electrical appliance into the wall socket. Then reconnect USB. All done, rebooted the printer and printed a document internal printer (report Configuration and Menu support) which printed fine.

  But printer will not print a document from Microsoft. Of the 49 Service error. Use Microsoft Office v.X student/teacher edition for Mac (2011).  It was most recently updated, 10 may 2016 with office update 14.6.4. I printed some documents after this update, but now this 49 daycare error appearing.

  Product number for this printer Laserjet Pro400 M401dn is: CF278A

  Any help would be appreciated.

  Steve945

  If you unplug the printer from the computer or network and turn on the fact come ready.  If so, then the print job that is still trying to print or a new print job is causing the error.  Delete all print jobs from any computer that uses the printer.  First upgrade the firmware using the easy firmware updating program.  Then try the same job and see if works.

• Pavilion dv7-6b20ex: since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  hi..

  Since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  I hope to have useful response... Thank you

  This letter specifically;

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  https://support.Microsoft.com/en-us/KB/918355

• I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  If the installation program itself fails to open and run. Download it again maybe your current download is corrupted. Also, what OS you are using and you are an administrator with permission to install.

• Cannot install the update KB955839 - error code: 80070490 & vista Service Pack 2

  I have vista ultimate and have been unable to install KB955839 for quite awhile now, I can install each update except KB955839.
  Without KB955839 installed, I don't not offered Servicepack 2, as an update in windows update, however when I hide it I'm offered servicepack 2 as an update.
  Installation fails every time however.
  I tried the two installation manual and windows install update for updates without success.
  Update Service Pack 2 appears to be related KB955839 install successful
  I tried most of the patches in this forum

  Are you download and SAVE and then go and RIGHT CLICK RUN AS ADMIN? Triple
  Make sure you download the correct version.

  Describe what is happening? Error messages or?

  Try the fix here:

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/ Rob - bicycle - Mark Twain said it is good.

• I can't get the update of windows to run. I get an error message that says that the update service does not work and I have to restart my computer.

  I am running Vista on a 64-bit computer.  I don't know with certainty how current I am, because as a problem earlier, but different, brought me back to earlier restore versions.  I checked the Services and confirmed that the Windows Update service is started.  I restarted my computer and the problem persists.

  Is there a file that might have something in it that shouldn't be there or I'm probably deal with a corrupt program?

  Hello

  You can reset the Windows components and see if it works fine.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

• On my XP machine, I am unable to download the updates. Error code 0 x 80246008.

  To update last Tuesday, I was unable to download the updates.  I went through the FAQ and decided to make a FIX for Microsoft Update.  Later when I tried downloads I got the error code 0 x 80246008 and later by Windows Defender error 0 x 80240022 has been received.  After several other attempts to repair as suggested in the bandages.  I discovered that the BITS service is missing or corrupted.  Now, after having tried several fixes I'm afraid I did the worst problem.  Y at - it all action correction that I can take to get a BITS download and own resettlement?  Apparently, the Windows Update service is intact and is set for automatic activation at startup, but without the partners of BITS service, nothing can be downloaded.  I would like suggestions.  I realize the support ends for XP in April 2014, but still would like to be as secure as possible.  Thank you.

  I think it's missing or damaged settings that causes this error code because of the following command which usually gets rid of this code

  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  and it can be a failure of the qmgr.dll and qmgrprxy.dll to register initially which then translates the inability of the BITS Installer to run.  On the first page of Veeshush talks about this, but you say that you have already saved the files. I don't really know what is suspended the installation procedure of BITS for you when there would have worked for others and that a procedure of Microsoft originates. Of course, some of the files needed to complete are corrupt.

  Doug and I had discussed is who actually remove existing entries from registry BITS

  as was suggested by another poster ElderL could solve the unknown problems that a single registry merger would not correct.  This would replace the registry values of BITS that are suspect with a set of values, who knows him well.

  Running the Microsoft Fix it tools might again be worth.

  Here are a couple of threads where the installation of BITS is discussed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-update-doesn

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/under-Windows-XP-automatic-updates-service-Svchost/ddedeb05-3b48-4F27-9222-cb43e7ad3776?page=1

• The Win32 Service error

  Received message ' Download updates for Generic Host Process for Win32 Services error ". Error is assumed occure in computers with Windows XP Service Pack 2 and security update of 87333 (MS05-012) I followed the instructions on how to determine what version of Windows XP I have.  I have "Version 5.1 (Build 2600.xpsp_sp3_adr.101209 - 1647: Service Pack 3).» What do I do about this error?  Should I be worried?  My computer is SUPER SLOW today.  And I got a virus on Thursday and Friday of last week that Norton Live Help went and deleted.

  My computer is SUPER SLOW today.

  http://www3.TELUS.NET/dandemar/slowcom.htm>

  Have a look here: http://forums.whatthetech.com/Help_My_computer_slow_t74560.html>

  04/05 / 1101:30: 22:00

• Cannot install the update KB2687407 - error 80070641

  Original title: KB2687407 - error 80070641

  I could install this WU since it was published on 09/12/12.  I have tried the stop/start of service of WU, I downloaded the update on my desktop and tried to install it in this way, I checked the knowledge base and can't find any help that works.  I suspect corrupt s package KB.  Can you get it someone please let me know how to fix this update?  Thank you very much.

  Hello

  Did you of recent changes made to your computer that is causing the problem?

  Method 1: Check out these links to solve the problem of Windows Update:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Method 2: we can use the approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  It will be useful.

• Cannot install the update KB975929, error 80073715

  Impossible to install update KB975929 get error 80073715, is an exceptional constant update, help in Windows only list or recognize this error #.

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• 29RC1 Firefox does not start when the update service enabled.

  W8.1 update 1 running. I installed FF29RC1 that works without problem, however when I close FF I can't repeat it because it says its already running. When I stop the service of FF in the Task Manager, turn off the update in the FF options, it works wihthout no problem and I can start FF whenever I want without any problem.

  29,0 Firefox has been released, so no need to install a release candidate.

  You can find the full version of the current version of Firefox 29,0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

  Have you checked in the system monitor if there is still a running Firefox process?

  Did you install Firefox in your user account (~ or/Home / < user >) or in a place that requires root for write access privileges?

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

• Windows cannot check the updates - C800044E error code

  Hello

  Since yesterday, I get a notification icon in the taskbar indicating that windows cannot check the updates. If I click on the icon and then click on the button "check for updates" in the new window, the search end reports that an error has occurred and the error code is C800044E. This happens every time after the computer starts and when I try to manually check for updates.

  The operating system is Windows Vista Home Premium 32 bit with OEM license.

  I already googled for this error code, but none of the suggestions found during the search worked. Mode by default with no results, I installed the MicrosoftFixit50202 (have not tried yet aggressive mode). I ran the malware Microsoft Windows (without threats found) removal tool. I downloaded and installed manually the KB947821 update for vista, also without results.

  The last successful update is dated more than a month previously, and I assume that at the same time, some important updates may appear. Can someone help me with this problem?

  I've already solved the problem by using the system restore (I used a restore enjoyed a week point).

  I'll answer your questions anyway, in which case this may help solve one similar problem to others:

  1 Vista SP2 (all updates important/critical installed as of October 1, 2010)

  2. Eset NOD32 antivirus/antispyware with current subscription. No third-party firewall (just the windows firewall).

  3-4. I have never installed a Norton or McAfee application on this computer, but I'm not sure if a trial version of Norton AV is pre-installed with this computer (if it did, I removed it when I originally set up the computer - almost 3 years ago).

• Cannot install the update KB955839 - error code: 80070490

  I have Windows Vista Home Premium.  The above update will be installed not - the update regarding summer time.

  Hello Michael,

  I suggest to download and install Service Pack 2.  Here is the link.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!