Plug MBP/VGA

Similar Questions

• Plug the VGA cable causes the crash or black screen on my Thinkpad. Help!

  On my newly purchased W530, a cable VGA-causes a crash or a black screen on my Thinkpad.

  The foregoing happens whenever I have insert the cable VGA which is quite annoying, because I use it with my projector every day.

  Accidents seem to occur more often when I closed the lid and insert the VGA cable. If I open cover more often get a black screen (which remains black even when I leave the cable again).

  I could try to fix this problem?

  Which driver (or other) would be the most likely cause?

  Thanks Adam! :-)

  Yes, as I mentioned, accidents have disappeared after installing the latest driver Nvidias own site.

  Remaining problems are small problems which I can live with to what NVidia fixes if all goes well with an updated driver.

  But it was really great to see instructions on how to start in safe mode on Windows 8. I always wondered who. Thanks again Adam! :-)

• 32HL 933 - no sound in PC mode using VGA cable

  I have a problem with the connection from a computer to the TV (32HL 933).
  I plug the VGA cable view is fine, but I can't connect the sound...
  Where TV takes an audio signal in PC mode? (in this model of TV)

  VGA cable only transmits the video signal.
  So if you want to have the sound on the TV, you use an HDMI cable or you need to connect the laptop to the TV using an audio cable additional. For example, you can connect to the headphones port in the port of the TV

• Satellite c855 - VGA port suddenly does not work

  Hi people

  I have the toshiba satellite-c855 - 17 c. Windows 7.
  Usually, I work on my laptop and monitor, which I use by plugging the vga cable. I use this set to the top for more than a year and never had any problems.

  Now, nothing happens when I plug in the cable. I checked with another laptop and the screen appears on the monitor - it seems that the problem is with my laptop.

  Do you have any idea why this has happened and the solution to this problem?

  Thank you
  Ben.

  Hello

  What happens if you use key Fn + F4 (or just F4) video output?
  You can move the monitor internal and external?

• Qosmio X 505: cannot get HDMI and VGA to work simultaneously

  I've had this laptop for a year this Christmas I got two monitors and they are the two acers. And I have a vga and hdmi output, so I thought he would become double monitors but it didn't.

  I really want to work onle the vga works. Please help if this doesn't work then I'll never buy a toshiba again FOR a GAME at all. HELP PLZ

  It's a monitor 23 inch.
  It works fine on my 42 inch flat screen hdmi in my room
  but it wont work on my monitor.

  Any help would be good please and ty

  Recommend checking this Toshiba document.

  + * Is it possible to use two external monitors on a Qosmio X 500? * +
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  Yes, it is possible.
  Plug the VGA and HDMI monitor on the associated connectors. Now you can use the FN + F5 key combination to activate the two monitors.
  Choose 'HDMI + CRT Extended Desktop ". The internal display will spend.

  Note: All three screens (two external and one internal) can not be activated at the same time.

• X223W - VGA does not? (input not supported)

  Or maybe that I don't do something good?  I'm just trying to plug my 360 via VGA.  I have my PC connected via DVI.  When the two are connected, I use the OSD to access the plug insertion icon.  I have 3 options here.  Analog, digital and DDC/CI.  Digital is highlighted that I assume average DVI is connected.  If I turn it on to analog the screen goes black and says "input not supported".  If I unplug my DVI cable and then just plug the VGA cable I always get "input not supported".

  Any help would be appreciated it drives me crazy.

  For reference, I used this same 360 and VGA cable on another monitor and it works fine.

  It seems that sent by the 360 resolution or refresh rate is not supported by the monitor.

  See this table of hours of support for this model:

  

• Multiple monitors: VGA laptop to Westinghouse TV

  I have an Acer Apire 5920. My warranty has run out of earlier. I got a virus in August and had to do a full restore. I used the DVD of Windows XP instead of Vista which was OEM on my Acer when I bought it. Right now I have Win XP Home Edition 32 bit. I had to download all my drivers on the Acer site.

  My question:
  When I plug the VGA of the laptop and the TV it says no Signal on the TV. When I arrived at the display settings in the Properties menu I have only 1 screen. It says "display:" (default monitor) on
  It doesn't let me change to another. I think that I have an Intel graphics card.
  How can I activate the Multi monitor on my laptop?

  Hello E - Odc,

  Thank you for visiting the Microsoft answers community.

  If you had the opportunity before you install Windows XP and that you are not given a choice now, perhaps you have installed the incorrect drivers. I am not able to determine what you have installed on the Acer site.

  Also, here are some links that may be beneficial for you in the configuration of multiple screens.

  How to configure and use multiple monitors in Windows XP
  The use of multiple monitors with Windows XP

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ripped off VGA connector

  Hello everyone. my brother is in a wheelchair, and fell accidentally into his computer, get out of the Chair, where the plug connector VGA in the tower being torn off (in fact, in, he was rattling in the case when I went down to check it out). the computer is a HP Pavilion Slimline series s5000 model n s5703w, I think that Win 7 Home Premium 32-bit (I can't connect it to monitor to check). from what I see, the video card is integrated into the motherboard, if that makes sense (M2N68 - THE Narra6). is the only way to solve this problem is to buy and install a new motherboard? I hate wasting the computer, it is practically new, never been online, it was only used to play some card games on it. Thank you.

  Hello

  A new motherboard and time to replace it would be more expensive then buy an external video (PCIe) card. A low-end PCIe card should be ok because you will have more power to operate. Please visit the following link:

  http://www.BestBuy.com/site/video-graphics-cards/PCI-Express-video-graphics-cards/pcmcat182300050008.c?ID=pcmcat182300050008

  Kind regards.

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• R61 stops when the VGA cable is inserted

  Hello

  I have not hooked my laptop to a projector for more than a year and now when I insert the cable into the VGA slot that the laptop stops! And even if it is still connected to power, ALL lights on the computer off. I have to remove the battery and reinsert it to restart the computer. It's probably an electrical problem right?

  Any suggestions?

  Thank you

  try to remove the cable problem, you have another vga cable to try? Also, can you try plugging the vga of the notebook to another screen?

• VGA problems

  So I just unpacked my new computer with Windows 8. I plan to include in my Entertainment Center. When I plug the VGA of my computer (an ASUS) to my TV, the picture is beautiful. There is a problem, however, the upper part of the display on the screen interrupts and has recently moved to the bottom of the screen (before there was any). Can someone help me with this problem?

  Nate

  So I just unpacked my new computer with Windows 8. I plan to include in my Entertainment Center. When I plug the VGA of my computer (an ASUS) to my TV, the picture is beautiful. There is a problem, however, the upper part of the display on the screen interrupts and has recently moved to the bottom of the screen (before there was any). Can someone help me with this problem?

  What is the native resolution of the TV via the VGA connection?
  What is the refresh rate, you should use according to the specifications of your TV (60 Hz?)?
  What refresh rate do you use?
  Your TV has an option menu or button "auto"?

• Use of VGA output simultaneously with DVI output

  My system as a Radeon X 1300 video card. By looking at system information shows a primary and a secondary exit. My screen is connected to the DVI output, which I assume is the main. The system seems to have output VGA, which I suppose is secondary. Does this mean that I can plug a VGa device activated in the VGA output and have works simultaneously with the monitor. The specific device that I'm considering is made by VRInsight GPS device for use with FSX Flight Simulator. Any help would be appreciated.

  Hello:

  You can as far as I know, because I'm doing it now.

  I use a video card GeForce 6200 AGP, a 19 "monitor LCD Dell on DVI and a Dell LCD 17" running on the VGA port.

  Paul

• Tecra M9-104 with docking station - DVI resolution

  I wonder if anyone can help. I have a Tecra M9 - 104 running Windows XP. I also have the docking station to go with it. The great thing about the docking station, it's that it can out to two screens as the port on my M5 Replicator could not do.

  I bought two identical external screens that have a native resolution of 1440 x 900. I went into the Nvidia display configuration and set up to display both (one is plugged in VGA and one DVI port). However, the display on the DVI monitor is wrong. After further investigation I woke up the menu of the monitor on the screen to see that the resolution actually be issued is 1280 X 1024, despite Nvidia screen saying 1440 x 900 has been the output. Whatever I do, I can't increase the resolution on DVI port.

  The only thing I could find on Google and these support forums is that the maximum resolution on the DVI port on a port replicator is 1280 x 1024, but it was for the M1 and M2 series. This laptop is the last series and as such, I expected that the spec had been updated at this time.

  Someone at - it ideas?

  Could be due to a limitation of the video driver on the laptop, or you can try to download a utility that requires to use a different resolution, its called Powerstrip (do not have a download link sorry).

  Be careful with it though, you can mess up your video driver

• HP Pavilion 500-164 playing through my TV station

  My HP Pavilion 500-164 is not an HDMI Jack on the back of the office.  But she has a VGA socket.  I plugged a VGA cable into my office and my television.  But don't you computer desktop on my TV screen.  Nothing else.  I have a HDMI cable.  Should I get a VGA to HDMI?

  You computer has the following connections;

  

  3 - VGA           4 - DVI-D           12 - audio: output port (lime) line

  I suggest to use a HDMI-DVI cable and a mini plug cable stereo 1/8 "to connect your computer to HDTV. Alternatively, you can use a VGA cable, but theoretically, the image will be of inferior quality.

  See examples of Amazon.com (RadioShack.com would not work);

  HDMI-DVI = http://www.amazon.com/Cable-Matters-Rated-Speed-DVI-D/dp/B004CBDY42/ref=sr_1_2?ie=UTF8&qid=1394162409&sr=8-2&keywords=hdmi-to-dvi+cable

  mini plug stereo 1/8 "= http://www.amazon.com/Gilmour-3-5mm-8-Inch-6-Feet-Stereo/dp/B000NO7CIG/ref=sr_1_13?s=audio-video-accessories&ie=UTF8&qid=1394162719&sr=1-13&keywords=stereo+1%2F8+inch+cable "

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• T420s black screen and no boot

  Hello everyone,
  I hope someone could help me with this problem
  I have a T420s that I bought a few weeks earlier, it's a used, so there is no guarantee with it, I used it several days without any problem, I do not use very often I use my business an alone most of the time.
  One day when I tried to turn it on, it stacks on a black screen and it beeps a beep then two other, nothing show on the same screen not the logo of thinkpad at the start, I thought it was a RAM issue about so I put my PC business, but without a bit of luck, so I wanted to see if his graphics controller issue I plug the VGA on laptop and my TV cable, and here I see boot thinkpad logo but after that I see a message on the screen saying: "real time clock error - control of Date and time settings." Press ESC to continue or F1 to enter setup"and when I press either nothing happen at all, always there batteries.
  I'm lost here, can anyone help please.
  Sorry for my bad English.

  It is used, it does not mean that there are no guarantees. If it is sold, the warranty stays with the machine. Check here first:
  http://support.Lenovo.com/en_US/product-service/warranty-status/default.page?