32HL 933 - no sound in PC mode using VGA cable

Similar Questions

• computer to the tv using vga cables

  want to connect my dell inspirion1420 my vizio hdtv using vga but tv cables no signal statement. Is there another way, or some sort of disk to run? Help, please

  Hello

  How to connect your laptop to your TV screen
  http://www.labnol.org/software/tutorials/how-to-connect-laptop-computer-TV-screen-LCD-HDTV/2331/

  How to connect your computer laptop/PC/computer to your TV
  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  In fact, Dell should have documentation on this on their site and more help in their forums.

  Dell support
  http://support.Dell.com/

  Drivers and Support technical
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Connect portable HDTV using VGA cable

  I wanted to connect my laptop to HDTV via a vga cable. I clicked on the external monitor to the graphics option section. then suddenly the screen turns off and now it is completely empty. I don't see anything while VGA connects. I have to disconnect the VGA to my screen on. Please solve it. I can't find the same rotation section intel GMA drivers mobile too...

  Hello
   
  Set the best display on your monitor and check the difference.
  Get the best display on your monitor: http://windows.microsoft.com/en-US/windows-vista/Getting-the-best-display-on-your-monitor
   
  It's normal. You will see a blank screen or an empty window on the computer screen. To view information about the computer's monitor, you must temporarily disconnect the HDTV.
   
  Note:
  To get the most benefit out of connecting your computer to a TV, you use Media Center, found in Windows Vista Ultimate and Windows Vista Home Premium.
   
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/HDTV-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite Pro A300 - how to get the sound on the TV with VGA cable?

  Hello world

  I have a real problem connecting my Satellite Pro A300 to my Samsung HDTV.
  The video works fine - I used a VGA connection on the laptop and the TV.

  The problem I have is healthy.
  I want the sound either also come from the TV. I tried a jack of 3.5 m from the headphone jack of the laptop to a red and white connection RCA audio on the TV, but it doesn't seem to work.

  Does anyone have any ideas or advice?
  I need of additional drivers, etc., or do some settings need to be changed etc etc.

  Hello

  Normally, to use the 3.5 mm jack plug in the headphones, you need an adapter cable.
  At one end, it has a 3.5 mm jack and the other side to connect red and white audio RCA connections.
  Here is an example of what I mean:
  http://www.optimization-world.com/IMG/prod/3_5_mm_rca_audio.jpg

  I m using such an adapter without any problem. You n t need an additional driver, or something more. It's the same as if you were using a helmet. :)

• How do you get sound on safe mode if it has not told!

  How do you get sound on safe mode if it has not told? He didn't use to say! It is possible a hacker has stolen the sound and typed it is? It could have been someone who was company or seized that they work in or landed a job at the company laptop I have! phyllisfc

  Frankly I doubt that you ever had its Mode without failure.  Safe mode is a specially designed Windows state that charge only a very minimal set of very generic for devices drivers, so that you can resolve problems or solve problems that cannot be solved with the full software and driver responsible.  Sound is one of the first things that gets tossed by the window, as improved video drivers, network drivers and so on.

• How to get the sound on Toshiba 32L6353DG using D - sub?

  Hello

  I own a Toshiba TV model 32L6353DG I want to connect with my laptop via D - sub! What I did OK! No problem at all! Now, I want to hear the sound of the TV and not cell phone... that's the problem!

  I can't find a solution!

  As far as I know using this connection, you can transfer a video signal only. If you want sound on the TV you use another cable to send the audio signal to your TV.
  What you need is cinch cable.

  On one side you have to connect it to your laptop using headphone jack and on ports audio-in TV (red/white).
  You need something like this double Cinch RCA (1/8 to RCA).

• Re: Weird sound coming from USB using the Panel mixing Audio on Satellite C870-1EX

  Hello!

  So, my sister has Satellite C870-1EX and she uses new Audio Mixer with integrated sound card sends its via USB cable to the computer (computer recognises as external audio device and map). It's the device: http://alesis.com/multimix8usbfx.

  A few weeks ago, she began to notice a very odd sound, sort of high-pitched, whistling, like a very fast electronic beep. Something similar to what good old modems of the internet when they were connected to the phone line, just not a little faster and strong.

  First of all, of course, we tested every single setting on the Audio Mixer Panel.
  Then, we got new USB cable and it traded.

  After that we also took down all the material, checked all cables, if necessary, detangle swapped the power supply, check a different recording software, even tried a few other recording devices USB etc etc.

  None of this has helped. The drivers are all there too.

  Here's the catch. I used the same equipment with the same settings on my computer and no hissing noise at all. The thing is, any parameter, we tried, only the hiss remains the same, nothing changes.

  Even if you apply a few sound effects which should either accentuate or reduce any type of noise in the signal that is sent to the USB port on the computer, this whistling noise remains the same.

  What worries me is that something is wrong with the material of my sister's laptop.

  The noise does not appear if we use, for example, microphone that uses 3, 5mm taken or the built-in microphone of the laptop during the recording of the commands in the same session with the same software and similar settings (given some must be different because of the different entry).

  However, the noise is if we use an external USB recording equipment on any of its ports.

  Windows on his laptop were resettled some time ago (now it is on Windows 7), but the problem appeared a few weeks later.
  As I said earlier, the drivers are all there and to date as well.

  So, I hope that one of you will return with a software sollution (single)... and I hope we will not need to take his computer back to the shop.

  However, as it seems now, the last is more likely to occur.
  Please, tell me I'm wrong :)

  Thank you!

  Hello

  One of my friends had a similar problem with a DJ controller: Traktor Kontrol S4
  There was not a sound, but he noticed a few dropouts stuttering and audio.

  The problem was the background processes that were open when you use the controller.
  To resolve this problem, it was necessary to disable all possible devices in the device as WLan, LAN, Bluetooth Manager, etc.
  In addition, he had to Disable Antivirus software and firewall that was running in the background.

  I put t know if it helps you, but I think that its worth a try

  Another idea: try to reduce the performance of the processor. This is possible in the Windows 7 power management.
  How to manage Windows 7 power management features
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Option CPU power management contains the option called the Maximum processor state
  Here you can set it to 90% - 80%

• I mplease sir help it sound my fold important using window 7

  Hi Sir... actully I have my folder in my pen drive.4 day there I did also my USB into my laptop and then copied my file important my disk of prn to laptop and I think that virus is next to my laptop or pn drive dat y next day when I opened my this important issue folder.i dat see is empty.den again once I copy this folder on my laptop computer for USB see again the dat folder is enpty.after den I didn't click on this folder and den clicked on "Run as Administrator" is laugh when I did copy this folder then see the notification "to copy this folder administrator permission" and there were 3 option continiue skip and cancel. so I pressed on continue 4 5 times. and in this time folder is not show in my USB. amplifier. I mplease sir help it sound my fold important using window 7

  Hi John,.

  I'm sorry to hear that you are facing this problem with one of your important files. I'll certainly try and help you recover the file.

  Plug the USB and run a scan complete using the scan Microsoft Security check for infections.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Sometimes, when pen drives be infected by some kind of virus, it can replicate this folder in the drive and hide the original file. You can follow the steps in the article to view hidden folders and check if it helps.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• your processor does not support long mode. use a 32-bit Vmware Data Recovery distribution

  Hi all

  When I tried to start VM in Vmware Data recovery, her gives me error as

  "your cpu does not support long mode. use a 32-bit distribution"

  I tried searching for the 32-bit version of data recovery, but not able to find out.

  Help, please

  Kind regards

  Selim Desai

  You can add a 64-bit host to a virtualized session of ESXi. The ability of VT is not transmitted to a guest operating system.

• get sounds (mp3) to stop using the timer

  I am able to get the sound to trigger the use of the timer:

  import flash.media.SoundChannel;

  Stop();

  var mySound:Sound = new Sound();

  var myChannel:SoundChannel = new SoundChannel();

  mySound.load (new URLRequest ("iphone2.mp3"));

  import flash.events.TimerEvent;

  import flash.utils.Timer;

  var timer1:Timer = new Timer(1000, 16);

  Timer1.addEventListener (TimerEvent.TIMER, timerListener1);

  Timer1.start ();

  function timerListener1(event:TimerEvent):void

  {

  if(Timer1.CurrentCount ==4)

  {

  myChannel = mySound.play ();

  }

  if(Timer1.CurrentCount ==16)

  {

  myChannel = mySound.stop ();

  }

  }

  but myChannle = mySound.stop (); is not liked by as3.  Any ideas on how to solve this problem?  Thank you

  The Sound class does not have a stop() method.  This is where the SoundChannel comes into play.

  Use:

  myChannel.stop ();

• HP EliteDesk 800 G1 SFF: HP EliteDesk 800 G1 SFF: using VGA and DisplayPort simultaneously for double configuration monitor

  If the title says it all. I'm trying to set up two monitors on my HP EliteDesk 800 G1 SFF. Here is my configuration:

  1. first monitor (Acer B223W) lights DisplayPort and displays things normally.

  2. second monitor (HP LP2065) is on the VGA port.

  The problem is that my second port monitor never gets a signal from the machine and going to sleep mode. Connect the second monitor changes my main screen at a desk empty (no icons, no taskbar, just a plain painted paper), which I believe means it tries to use my VGA monitor as main display.

  However, the VGA monitor never seems to show anything. I spent my main screen on the first monitor successfully too, but is not all about him either.

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and update the video driver following, chipset and BIOS:

  Intel Graphics Driver (64-bit) (International):

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387481&swItemId=vc_140415_1&swEnvOid=4059

  Intel Chipset drivers:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387481&swItemId=vc_124826_1&swEnvOid=4059

  BIOS:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387481&swItemId=vc_147068_1&swEnvOid=4058

  In case the problem persists, please exchange the monitor and VGA cables cables once and check.

  Try and clear CMOS by following the steps below:

  1. turn off the computer and unplug the power cord from the power outlet.
  2. remove the access panel.
  3. on the system board, hold down the CMOS button for 5 seconds.
  4. replace the chassis access panel and reconnect the power cord.
  5 turn on the computer and let it boot.

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP

• USRP synchronization for transmission using MIMO cable

  Hi all

  two usrp are connected with cable MIMO and it is the shared ethernet mode.

  I've already put the source of the clock for the usrp master a defult and usrp slave uses MIMO cable.

  the same time source.

  However when I send samples transmits only usrp, the other usrp is not buffering at all.

  = tx_stream_-> send (buffer, samples_ptr_-> vector_ [0] .size (), tx_md_, uhd_sample_timeout_);

  Please give me some advice,

  Thank you

  DEE

  Using LabVIEW?  This forum focuses on LabVIEW with USRP.

  Supprt UHD and GNU Radio are provided by the Community open source.

  (UHD specific aid may be available at [email protected])

  If you are using LabVIEW, this document may be useful:

  http://www.NI.com/white-paper/14311/en/

• No sound from the tv when connected via a laptop computer vga cable

  I connect my acer to a sanyo hd tv with a vga cable.  pictue is fine, but the sound only comes from my laptop, using windows 7

  Hello

  I suggest you refer to the link mentioned to ensure that Media Center has been configured properly with the TV below:

  Getting started with Windows Media Center

  You may also like to refer to the below mentioned link and check if the cables were connected as they are supposed to be:

  Connect your computer to a TV

  Note: If your computer is connected to a TV, notes that many video cards and cable types do not support audio signals. You may need to connect the sound card of your computer directly to your speakers.

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I connect to my HDTV using vga, I get a BSOD, even tried with different pc tv/cable

  Hello

  Thank you for taking the time to read this! Yesterday that I tried to connect to an HDTV using VGA instead of someone else, worked well. Buy a vga cable today and connected to my 1080 p full hd Phillips and got a BSOD almost instantly. I tried some things and managed to do the work! Played skyrim for a little and left the laptop in sleep mode. Came, open upward and the screen stayed black, nothing I could do to get a Visual.
  Now, whenever I connect the cable I get a BSOD, it works with any other laptop, excludes the cable and television.
  I have updated all drivers in the list, checked my drive for errors using the good chkdsk, smart status on the disk is good, all withdrew. I know for a fact that my laptop works fine with extra monitors, we use all the time on my internship and as stated, it worked yesterday on another TV.
  Features of the laptop:

  ASUS n73jn

  processor Intel i5 460 m
  NVIDIA geforce 335 m
  Windows 7 64 bit
  4 GB ddr3 RAM
  the HDMI port is dysfunctional, just a few flickering screens filled with black lines, that's why I try vga. My guess is the hdmi port is DOA, but did not have a hd tv up to 2 years after purchase.
  
  News of the capture of blue screen:
  ==================================================

  Dump file: 093012-44382 - 01.dmp

  Crash time: 30/09/2012-18:57:22

  Bug Check String: SYSTEM_SERVICE_EXCEPTION

  Bug check code: 0x0000003b

  Parameter 1: 00000000' c0000005

  Parameter 2: fffff880'074259 cd

  Parameter 3: fffff880'029f90a0

  Parameter 4: 00000000'00000000

  Caused by the driver: igdkmd64.sys

  Caused by the address: igdkmd64.sys + 1e29cd

  Description of the file:

  Product name:

  Company:

  Version of the file:

  CPU: x 64

  Plant address: ntoskrnl.exe + 7f1c0

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\093012-44382-01.dmp

  Number of processors: 4

  Main version: 15

  Minor Version: 7601

  The dump file size: 262,144

  ==================================================
  Thanks for your time!
  
  Greetings,

  Joachim

  Sorry, I was a little confused with the HDMI and VGA - continues to be the same advice.

  Looks like you have isolated to a hardware problem.  With the Intel graphics card is not posted, I have to wonder if the hardware problem is with the graphics card Intel

  FWIW - we have seen a number of overheating problems with the graphics from nVidia on your model.  Make sure the laptop is on a hard surface - and I would also use a filling of cooling (if possible) to ensure that the system is not overheating.

  Install a new copy of Intel video drivers is probably the most important thing to do now - and ensure that this card appears in Device Manager (and check in the nVidia PhysX tab to see if it appears here - even though I'm not familiar with this program).

  Try the video stress tests here: http://www.carrona.org/addldiag.html
  They can show that there is a hardware problem - but a lot of this will involve what video card works at the time of the test (even once, I don't have a lot of experience to make systems to change video card).

  Good luck!

• When connecting two books of Mac with Migration Wizard using a cable Ethernet 'right' or 'twisted '?

  Hello

  Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?

  You can use either; There is no advantage to one or the other specific.

  (144276)