Plug on the RAM

Similar Questions

• Plug on the RAM for-> E1-531-2686?

  How fast is the RAM for this guy? Do we need to buy a ~ module corresponding to the latency/size/speed to fill the empty slot?

  I can't find any info on this anywhere. Would be nice to order the RAM and the computer at the same time. I think that the listed max RAM is 8 GB, so get another 4 GB chip would be the way to go.

  Thank you!

  I contacted Acer via the online form and they said:

  "

  ... We show that the E1-531-2686 can be upgraded to a maximum of 8 GB by using the SO-DIMM DDR3 1333. If you want a manual for this model, these can be downloaded from our site of support under the heading "Drivers and manuals."

  "

  The problem is, the user guide they're talking about is "Generic" for the entire line E1-531. Basically, there just pictures of ports and a guide for the use of the temperature and of course a lot about your product registration.

  Also, search this site, forums and not, the acer store and several others and some ' net research I couldn't get an answer to this. So I'm glad that they go back to me so fast... yet, funny that info is not easily available...

• Use of the RAM of Firefox causing accidents?

  In the last three days, I have observed a new problem with my Firefox. I never had this problem before.
  If I load any text or images on a tab, it causes the RAM to increase usage. Its use does not diminish over time, and sites such as Facebook and 9GAG, with long flow of images and text, can cause the use of RAM go more than 2.5 Gigabits. Once it reaches this threshold, Firefox crashes. Manually close Firefox also removes the use of RAM, although the closing of tabs does not work.
  I scoured the list help accidents, even if nothing is done.
  I am running the latest version of Firefox (15.0)

  (Note: problems still occur with the functions below disabled)
  Add-on:
  Adblock Plus 2.1.2
  AVG does not follow the 12.0.0.2189
  Greasemonkey 1.0
  Memory Fox 7.4 (attempted solution to problem, does not work)
  Print Helper 2.5
  TinEye Reverse Image Search 1.1
  Xmarks 4.1.2
  Plugins:
  Adobe Acrobat
  iTunes application detector
  Java Deployment Toolkit
  Microsoft Office 2010
  Pando Web Plugin
  Shockwave Flash
  Silverlight plug-in
  VLC Web plugin
  Windows Live Photo Gallery

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Suddenly very slow - being report attached - it's just the ram?

  
  

  
  

  
  

  Hi all

  
  

  my macbook suddenly turns very slowly, he has been allowed recently after some graphics clamping because it is so old!

  
  

  things are critical.

  
  

  If it's just the ram, (I doubt it, but maybe wrong!) can someone help me with my maximum?

  
  

  I think that his officially 4 (2 x 2), but remember reading that a 4 + 2 can work?

  
  

  Thank you

  
  

  Paul
  

  
  

  
  

  
  

  
  

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-13 13:35:22

  Download EtreCheck from https://etrecheck.com

  Time 06:22

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Suddenly very slow - opening system same pref is delicate. posing for the window of the attachment in mail for mac can take 2 minutes. No process obvious defect. Mac Word fails to meet very often. I hope someone can help! Thank you

  Hardware Information: ⓘ

  MacBook Pro (17-inch, 2.4 GHZ)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro3, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  2 GB RAM - Insufficient RAM! Extensible - [Instructions]

  BANK 0/DIMM0

  1 GB DDR2 SDRAM 667 MHz ok

  BANK 1/DIMM1

  1 GB DDR2 SDRAM 667 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 5

  Video information: ⓘ

  GeForce 8600M GT - VRAM: 256 MB

  Color LCD 1680 x 1050

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - since the start time: about an hour

  Disc information: ⓘ

  FUJITSU MHW2160BHPL disk0: (160,04 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  The PR (disk0s2) MacBookPro /: 159,18 GB (28,37 GB free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Apple computer Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. LaCie.ScsiType00 (1.2.11 - SDK 10.5 - 2016-04-13) [Support]

  com.jmicron.driver.jmPeripheralDevice [no charge] (2.0.4 - 2016-04-13) [Support]

  com.lacie.driver.LaCie_RemoteComms [no charge] (1.0.1 - SDK 10.5 - 2016-04-13) [Support]

  [no charge] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5 - 2016-04-13) [Support]

  Launch system officers: ⓘ

  [loaded] 9 tasks Apple

  [loading] 150 tasks Apple

  [operation] 55 tasks Apple

  [killed] 22 tasks Apple

  the 22 killed process lack of RAM

  Launch system demons: ⓘ

  com.apple.Kerberos.kdc.plist [failure]

  [loaded] 46 tasks Apple

  [loading] 152 tasks Apple

  [operation] 77 tasks Apple

  [killed] 12 tasks Apple

  12 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.epson.Epusp.plist (2009-07-06) [Support]

  [operation] com.flipvideo.FlipShare.AutoRun.plist (2010-10-11) [Support]

  [loading] com.lacie.eventsactions.launcher.agent.plist (2012-08-14) [Support]

  [operation] com.motive.alertDetectorHost.plist (2014-09-06) [Support]

  [operation] com.motive.userAgent.plist (2014-09-06) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-05) [Support]

  [operation] com.freemacsoft.appcleanerd.plist (2014-09-28) [Support]

  [failure] com.lacie.desktopmanager.service.plist (2012-08-14) [Support]

  [operation] com.motive.systemDaemon.plist (2014-09-06) [Support]

  [operation] com.sonos.SonosLibraryServer.plist (2016-03-16) [Support]

  [loading] com.sonos.smbbump.plist (2014-08-10) [Support]

  [loading] net.sourceforge.MonolingualHelper.plist (2012-11-13) [Support]

  User launch officers: ⓘ

  com.apple.SafariBookmarksSyncer.plist [loading]

  Items in user login: ⓘ

  None

  Other applications: ⓘ

  [loading] 386 tasks Apple

  [operation] 158 tasks Apple

  [killed] 35 tasks Apple

  Plug-ins Internet: ⓘ

  npMotive: 1.0.0 - 10.7 SDK (2014-07-28) [Support]

  FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-01-14)

  Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

  JavaAppletPlugin: 15.0.1 - SDK 10.11 (2011-11-27) check the version of

  Default browser: 601 - SDK 10.11 (2016-01-14)

  OfficeLiveBrowserPlugin: 12.3.5 (2016-02-09) [Support]

  RealPlayer Plugin: unknown

  Silverlight: 5.1.20913.0 - SDK 10.6 (2013-11-17) [Support]

  iPhotoPhotocast: 7.0 (2012-11-13)

  3rd party preference panes: ⓘ

  Fan control (2007-10-03) [Support]

  Flash Player (2016-04-05) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  MacBookPro PR: disk size: 159,18 GB disc used: 130,82 GB

  Destinations:

  Time Machine [Local] backups

  Total size: 0 B

  Total number of backups: 0

  An older backup: -.

  Last backup: -.

  Backup disk size: too small

  Save the size 0 B < (disc 130.82 GB X 3)

  Top of page process CPU: ⓘ

  7% kextcache (3)

  4% kernel_task

  4% WindowServer

  3% activity monitor

  1% mdworker (8)

  Top of page process of memory: ⓘ

  Kernel_task 311 MB

  150 MB com.apple.WebKit.WebContent

  Mdworker (8) 94 MB

  63 MB activity monitor

  49MO Finder

  Virtual memory information: ⓘ

  60 MB of free RAM

  1.94 GB used RAM (502 MB cache)

  2 MB used Swap

  Diagnostic information: ⓘ

  April 13, 2016, 12:54 ~/Library/Logs/DiagnosticReports/suggestd_2016-04-13-125400_[redacted].crash

  /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd

  April 13, 2016, 12:47:39 PM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-124739_ [redacted] .hang

  / Applications/Microsoft Office 2008/Microsoft Word.app/Contents/MacOS/Microsoft Word

  13 April 2016, 12:27:03 self-test - spent

  April 13, 2016, 11:27:19 AM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-112719_ [redacted] .hang

  the 2007 17 "MBP may be increased up to 6 via a 1 2 GB and 1 GB a 4 GB PC2-5300 DDR 2 667 MHz. chips

  2 GB, trying to run 10.11 and then DO something ELSE that the operating system will stretch this system.

  more RAM will give this computer room to breathe when he tries to run this OS.

  I recommend these guys to the United States, and they also have a European distribution

  http://eShop.MacSales.com/MyOWC/upgrades.cfm?model=268

• 32 bit OS and plug into the size of the memory of the Council

  Does anyone know how this works...  If I get a PC with a 32 bit OS (Windows XP 32-bit, etc.) and it has 4 GB of installed memory, how the OS accesses a plug in card memory or I/o memory mapped on it.  32-bit to address up to 4 GB and which is exhausted by the RAM installed.  Or, does not.  Or, it would require a 64-bit OS to work.

  The reason why I ask is that I'm looking at the slot 18 PXI express chassis for a new design, but it would be filled many cards that contain large amounts of memory on them that control would need access.  For example, if each card had 256 MB of memory and I put 10 of them on the chassis and installed the controller has 4 GB of RAM, it seems to me that I have run out of memory addresses.  The cards would be personalized using VISA advice to implement "the device drive" to access.

  I am also interested in my candidacy under WinXP vs under LabWindows in real-time.  I can't seem to find the details on LabWindows in real-time, but I guess it's a 32 bit OS.

  Thank you for your two answers.  Very useful.

• The RAM and HARD drive upgrade

  Hello

  I put my laptop, at level

  8.1 Windows 64-bit, Intel Core i7-4700MP @ 2.40 GHz

  Currently 12 GB of Ram - 8 GB & 4 GB Kingston DDR3

  Currently 1 TB Toshiba HDD
  http://storage.Toshiba.EU/CMS/en/HDD/computing/product_detail.jsp?ProductID=409

  I'm looking to upgrade the 4 GB of RAM to a 8 GB, I just don't know how many pins each room has. Any guidance where to find this without disassembling the machine would be very handy! -I think it's a 204pin?

  Also looking to add a second hard drive on my machine, what is the maximum size that can take this laptop? Ideally I'd like an another 1 TB HDD (same brand) than my current. Is this possible? Then the hard drives of 1 TB overprinting two system?

  EDIT: Is it possible to have the other as an SSD? Although that can't really benefits to have as a slave instead of a master drive.

  Thank you very much

  Dan

  Hello

  Manual - Page 2

  Plug

  RAM: Yes, 204pin SODIMM SDRAM desired. You can buy the memory stick to the exact configuration & preference even brand that is already installed on your computer laptop & listed in the service manual, so that it works correctly.

  Configuration of the RAM: 8 GB DDR3L 1600 MHz PC3L-12800 1.35v SODIMM SDRAM

  Run this tool to know the configuration & Details of RAM already installed.

  Page 51 details the procedure of replacement, fairly simple.

  HDD: According to the manual, it has double drive HARD support. You can put another 1 TB 2.5 inch 9.5 mm SATA HDD. You can buy additonal material of hard drive Kit (HP PRTs number: 720237-001) to install on secondary Bay for data storage.

  I would have preferred a faster 7200 RPM HARD drive with the cache higher like this , if you want more storage.

  Alternatively, you can replace the current HDD with SSD of similar form factor (2.5 inches SATA 7 mm or 9.5 mm thick) and make as boot drive by moving the drive toward SSD HARD integer before replacement & put old HDD to secondary storage Bay. SSD would defintely thrust upward performance drastically, but they are expensive - I would say worth the cost.

  Page 48-50 details the replacement procedure. Its relatively simple to do.

  Concerning

  Visruth

• How fast is the RAM on my Veriton VX275-UD5800W?

  Need to add 2 GB of DDR3 extra RAM to my computer, but need to know what speed is for compatibility reasons.  I do not have the manual for this computer.  Any information would be very appreciated.

  Hello
  Plug the RAM: DDR3 800/1066 MHz SDRAM

• Acer Aspire V5 552 slow game performance low when it is plugged into the charger (HELP!)

  So, I recently noticed that my Acer laptop has a problem when it comes to games. The speed of the CPU is really low when you start a game, I did not notice this until a few hours before... I was playing Borderlands 2 and I am disconnected from my laptop to move it to my office and I noticed that my FPS has increased almost double what they were before, I plugged my laptop for the charger and I started to look at the the CPU cores, each carrot got preatty fluctuating between speed and low speed. I've tested this with all my games and all had the same results, for example a Borderlands 2 area when it is plugged in the exercise was about 18-22 FPS, but when disconnected from the charger the FPS increased from 34-48 or more. I tried to read a lot of things on the web and can not find a solution to this...

  Another test I did was with Dolphin Gamecube emulator, the FPS when playing the legend of Zelda The Wind Waker varies between 22-26 or lower on the places of strong thickness, when unplugging my laptop charger I have 30 fps constant in these heavy areas.

  Also with Counter Strike Global Offensive, the game normally ran about 50-60 FPS in all the cards and then tested without the charger plugged in and got 70-120 FPS on all cards

  https://www.YouTube.com/watch?v=xc6Hwgedqmo

  This video shows exactly what happens for me, unless I have an AMD GPU and CPU.

  My Acer Aspire V5 552 Specs are.
  Windows 7 X 64
  8 GB RAM
  AMD A8 - 5557M @2. 1 GHz to 2.8 GHz Turbo
  AMD 8550G GPU
  I have all the latest drivers and updates installed.

  The charger is not damaged, it is original one supplied with the notebook.

  Got a nice deal on a MSI gaming laptop. At first I thought that the Aspire V5 has been an excellent laptop for budget games, but then turned that has a performance problem that ruined the processors to give power maxi while only plugged in, but when unplugged the other way around. Still a nice cell phone with potential wasted with this particular problem.

  No solution to this problem, tecs don't even bother looking at BIOS like other manufacturers of laptop to solve this same problem.

• The Task Manager does not recognize the ram upgrade

  Hello HP community!

  Well, it seems that I have a problem with my ram upgrade. My system came with 2 GB of ram, and I had to upgrade (with another 2 GB), I am using programms like autoCAD, 3dsmax, photoshop, etc who have special needs on the RAM. Here's the problem; While the bios memory being recognized (4096 MB), what the task manager of the total physical memory is only 2046 MB! I also did the update to the BIOS, but it didn't work. The new memory I plugged in has the same features with one installed. The only difference is the manufacturer, the new is Kingston.

  Here are the characteristics of my system;

  Operating system installed: Windows Vista 32-bit

  Product name and number: HP Pavilion dv7 - 2030ev

  • Motherboard: Quanta 3624 intel PM45 (supports up to 8 GB of ram)
  • CPU: Intel Mobile Core 2 Duo P8600 2.40 GHz (64-bit Architecture)
  • RAM: 2 GB DDR2 PC2-6400 800 MHz 6.0 CASE Samsung latency
  • BIOS: F.46

  The RAM I bought is:

  Latency CASE of Kingston DDR2 PC2-6400 800 MHz 2GB 6.0

  (The package information to be exactly: KVR800D2S6 / 2GB PC2 - 6400 CL6 SODIMM 200 - Pin)

  I also mention, I tried the only Kingston on a Slot and the system worked without any problems...

  I would be so grateful if you could help...

  Thank you in advance,

  Nick Chatzikonstantinou

  Hi, Nick:

  One of our experts at the top of the forum (DavidPK) page suggested that you look at this solution to the question of memory you meet...

  I quote David:

  "In the system startup tab Configuration screen, the Advanced Options, it proved that there is a check mark in the maximum memory box.  Once removed and the applied change, Windows recognized all the Ram (less the reserved) after the reboot. »

  If please give than to try and post back and let us know if that frees a memory system for you.

  Paul

• This configuration of the RAM is good?

  My laptop was originally 4 GB of RAM running Windows 8 Pro x 64 (processor i3).

  This RAM is only a single stick of DDR3, but the motherboard supports 2 slots. Me is ever had a 2 GB DDR3 stick nine gave me.

  I wonder if this combination of good Rams - a 4 GB and 2 GB on two slots? Is it compatible?

  I plugged the 2 GB key to another location and Windows detected. My RAM was now 5.80 GB usable compared to 3.80.

  I have read a few forums that RAM sticks must be equal in size to be consistent like having a 8 GB of RAM with two 4 GB sticks.

  Is the RAM Installer good since I have 6 GB RAM for a 4GB and 2GB key?

  Thank you!

  My laptop was originally 4 GB of RAM running Windows 8 Pro x 64 (processor i3).

  This RAM is only a single stick of DDR3, but the motherboard supports 2 slots. Me is ever had a 2 GB DDR3 stick nine gave me.

  I wonder if this combination of good Rams - a 4 GB and 2 GB on two slots? Is it compatible?

  I plugged the 2 GB key to another location and Windows detected. My RAM was now 5.80 GB usable compared to 3.80.

  I have read a few forums that RAM sticks must be equal in size to be consistent like having a 8 GB of RAM with two 4 GB sticks.

  Is the RAM Installer good since I have 6 GB RAM for a 4GB and 2GB key?

  If it works - it's probably fine.

    
  Many recommend - for most systems - be stored in "pairs" for best results. through this board - you do not follow these best practices.
    
  If you begin to notice an instability of the system, take note of the questions and try to recreate them, then remove the additional memory (2 GB in this case) and see if the symptoms disappear.  (I'm not saying this will be the case - but if this is the case - it would be wise to focus on the memory do not match as a possible cause - just in case.)

• How you upgrade the RAM on Mac mini (end of 2014)

  The Support page says it is not accessible, but everything is assembled (without guarantee) just to write this post in Safari with open iTunes I am hitting 3.3 4.0 GB.

  I've always liked Apple since the first iPod came out, but I didn't know that their computers were also disposable.

  I guess I should know better when the price is only a little higher then the Apple TV, I went to buy, but it's the first Apple computer, I buy, and it's better than my Apple TV ver1 who died.

  So when I cut it open I find accommodation from the PIN and what chip will take the 1.4 GHz, 4 to 8 GB machine.

  I guess there is only one slot (pinout) and it is probably welded in.

  No, they were serious

  the RAM is welded in there. You can not remove it.

• Font managers of the RAM and fonts

  Hi all

  I feel that the ability to enable and disable individual fonts using font (font book or third party) management software is designed to eliminate RAM memory (or at least somehow the unloading of the treatment of the Mac).

  I also believe I read that he mentioned somewhere that all fonts placed in the user/Library/Fonts location are always active in the RAM, and this is perhaps why it is important to not just throw hundreds of fonts in this folder.

  I wonder:

  -If above are true?

  -If you use third-party font management software to disable a font placed in the folder User/Library/Fonts eliminates actually he RAM memory (as is probably for policies outside the system of appointed police records)?

  -If none of this is true, then why even should we use font management software to disable or deactivate fonts - why not just let them all turned on if they are not in the RAM?

  I want to make sure that I fully understand. I hope that this will help me make more informed decisions about my workflow of font management.

  I'm under El Capitan 10.11.6, although I don't think that this specificity is relevant.

  Thanks for the informed answers!

  I don't think you are quite correct, I hope someone will correct me if I'm wrong but here is my assessment of the situation...

  All installed or active policies are not loaded in RAM at startup because it would be than a useless on memory limited to Macs. System fonts will be loaded into memory as they are usually required.

  I believe that certain police functions get cached, such as previews of the fonts that are used in some applications, these selection committees are often written cache files stored on the drive that I can tell.

  Installation and activation of the thousands of fonts may cause some problems as apps may need to generate previews of these fonts - for example MS Word has its own custom selector of fonts that use the real font for names selection. Some design apps can analyze or search fonts when opening certain documents with the related font styles. Other applications such as TextEdit, Mail system use based Gatherer so that they benefit the plan puts large fonts in cache.

  The reason of FontBook is to assist in the management of fonts. OS X uses the 'library' system to allow multiple levels of abstraction, by example/System/Library is for OS-level files (stuff own apples), / library of the third parties who rely on the scale of the support system, ~/Library for user specific files. There is even in charge of resources to be stored in/Network/Library for use with a server on a WAN.

  Manage all this complex without a central application. In my view, that order preference is the user on the highest levels, so your own user fonts folder is selected on the system if you named the same way fonts. Part of the idea is also that you can export fonts in your own home library without affecting the other users of the system.

  Third parties also have police managers this attempt to 'do the right thing' based on what documents and applications you use. These are for most major design offices that use custom fonts or is needed to deal with versions of specific fonts, variations and even if the fonts are licenses for specific customers etc.. Fonts dynamically loading & unloading can cause headaches depending on what software you use.

  I do not think that average users need to think about fonts on OS X (beyond adding their favorites occasionally), you may be overthinking it unless you're in lots of design work.

  If you are concerned about running out of RAM, you probably need to install more, get a better Mac or run applications less. Just keep in mind what OS X tent now to use all the RAM available most of the time if not what is the point of installing it?

• iPad tells me "Not Charging" when plugged into the docking station

  It is a very new problem for me. I had the iPad the same docking for the months and not had a problem. But now when I plug in, the iPad now tells me in the upper corner is it 'not supported' y at - it something I can do to fix this?

  There seems to be something that is changed with iOS modified 10 power requirements for the load.

  No idea when or if things will change, so all users can make use of the work load by plugging into the wall.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• When I power on my iPhone and plug in the charger it turns on, is this normal?

  When I power on my iPhone and plug in the charger it turns on, is this normal?

  Yes, it's normal.

  If the battery power goes off and you recharge it will reboot the phone for you when it reached a stable level so that you can get phones without hovering above the device to see if it is ready.