Drive HARD secondary is not recognized

Similar Questions

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings

• External hard disk is not recognized in my computer

  My external Western Digital USB hard drive is not recognized in my computer.

  I see it in Device Manager and computer management/disk management but not in my computer.

  Update driver, a refreshed in disk management and several reboots.

  The external hard drive is there but not recognized on my computer.

  I need to restore from this external hard drive, but I can't access it.

  most of the answers deals with reformatting... the original post says he wants recover from this drive to reformat does not help... the external usb drives, equipped with cables that have 2 ends of usb, connect the two in to; separated on the MB, separate usb hubs usb ports it is because power is causing problems (current rises to voltage drops) then sometimes access to the drive causes the voltage on a single falling down USB, think the os it's read-only / permission issues, with 2 connected to separate power sources the question goes... they were built that way...

  I also recommend to never put a USB through a third party hub as more often which can cause problems with the unrecognized drive.

  That said, yes I had to reformat to access a drive, if you cannot write to a disc rclick and observe the permissions, if you have formatted the drive on another pc and not changed the permissions for everyone, then under sercurity see you permissions set on a long number, it is because he is always set to original pc (or the id of this pc). Sometimes you can over the way these parameters by taking possession (in the s parameters) and reset to everyone on the local pc.

  Something else I found on the disc is not recognized... Plug it into the usb port as described above and restart the pc, I got this job...

  Note: I deal with almost all the avalible from different readers that my clients use them all.

• I formatted my laptop and my drive hard (D :) is not opening! HELP PLEASE

  I installed Windows 7 on my laptop (upgrade). I deleted the first partition (100 MB) but could not remove the part containing the windows (C drive). I continued the installation

  Result: A new copy of windows has been installed, but the old windows files have been saved (windows.old). I deleted this file.
  but this isn't the BIG PROBLEM
  My problem is that my drive hard (D :) is not opening. When I click on it it says D:\ is not accessible. Access is denied.
  
  
  It contains all my important files! I didn't intend to get rid of it!
  Help, please!
  
  
  PS: I used a program called RecoverMyFiles v5. This is for ntfs recovery...

  Hey I found the solution. I went to my computer, the drive hard D properties, security and added my user name... so it's it.my files r rear access is not denied more :)

• Drive HARD recovery does not not for Satellite Pro L450D-12 x

  I have a laptop that I'm fixing for a friend.
  According to toshibas official specification it is than a HDD recovery partition which is hidden.

  For a reason unknown to me, now the 0 (zero) key does not work. F8 does not work either and the windows system restore does not seem to get me there either.

  Can someone please explain to me why this is happening?
  Nobody ever touched the hard drive on the alleged recovery hidden partition which is toshibas official specs 100%...

  Anyone share a few ideas with me here please

  Kind regards
  Andrew

  Hello

  The HARD drive recovery partition is not hidden
  In my case the image files when placed on the second partition in Toshiba HDD folder.

  However, the fact is that HARD drive recovery could be launched by pressing the F8 key, and then choose the option called repair my computer and in a new window the recovery HARD drive option should be chosen.
  If this is not possible, then you will need to retrieve the laptop using the recovery disk.

  I guess that this disk is not created in the past. Right? You can create the disc using the recovery disk creator which is preinstalled on all Toshiba laptops.

  If this is not possible, then you must order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

• HP 15 laptop: DRIVE HARD DO PARTITIONNE NOT VISIBLE AND INITIALIZATION is NOT POSSIBLE

  My laptop worked fine until that currently when my brother introduced it is impossible to return to the start and the error message indicating that "no boot found device, took it back to where I bought it and they have installed a Windows 8.1 which worked for about 3 hours, then began trolling." tried to restart it to see if it will win its normal pase but it never restarted, it opens but could not pass the HP logo in the middle of the screen, when I took it back to the shop to check. They tried to reinstall the operating system, but the hard drive partitions are currently not visible. Help, please.

  This message indicates that the file system is damaged, and as a result, one or more of the boot loader files is no longer working properly.  The general solution - that no matter what RENOWNED repair shop would know well - is to start repairing Windows Media and run Startup Repair machine, probably three times.  If that did not set her, the next step would be to start the computer from a hard disk utility and run a file system check.  If defective, which would be more likely to say that the hard drive was not - and then only, the reader will have to be replaced and windows resettled.

  In addition, Win8.1 comes with quick start already on.  This force the machine to fall into a new form of hibernation when you stop - preventing access to the disk partitions hard while they are in this State.  Once more, any store repair FAME SAURIEZ cela and told for sure you.

  Looks like where you bought is occupied by people who are incompetent when it comes to diagnose and repair Windows PCs.

  I assume the unit is no longer under warranty, otherwise you would have contacted HP for repair.  But, that being said, your first step should be to contact the HP Support to see if you have repair options: Contact HP customer service | HP® customer support

  An alternative would be to buy a new hard drive, order of HP recovery materials and use it to reinstall the machine.  See the details in the link: HP computers - getting HP discs recovery or a USB HP recovery disc | HP® customer support

• My CD/DVD drive has disappeared / is not recognized

  My CD/DVD drive is not recognized. I don't see what may have caused it, the only thing that I changed it recently on my computer is a windows update.

  In the Device Manager under CD/DVD-ROM drives, there is a subcategory of TSST corp CDDVDW SH - S223F ATA Device (I presume it's the name of my drive) and when I go on properties in that under device status it says

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click "Find solutions to send data about this device to Microsoft and to see if there is a solution available."

  After clicking on "check for solutions" nothing seems to happen, can anyone help?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Drive CD/DVD is not recognized.

  Original title: problems with ' Drive

  Yesterday, Fix it Center has replaced the driver for my CD/DVD. It has worked perfectly for a few seconds and then 'frozen '.
  After several attempts to restart it, I ended up doing a system restore, which (as you know) 'lost' the driver for it had "lead to new!
  This morning I tried again to use Fix it Center, but get now an error code: 0 x 80092003.
  Any help to this sorting will be appreciated.
  Kind regards.

  Hello

  Looks like the drive may be faulty, did you add that any CD or DVD of recent programs-
  especially those that load at startup?

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Secondary monitor not recognized - problem with Windows 7.0?

  Hello
  I am running Windows 7.0 on my system. I have connected a secondary monitor, but this additional monitor is not recognized. Could someone suggest something that can be done to remedy this?
  Thanks for your time,
  Jaymanika.

  Make sure that your graphics card drivers are up to date.  In the case of ATI, use later.  In the case of nVidia, archived version 182 has proved to have the most success with the people here.

• drive hard Dick can not be explored

  the problem is when I want to explore my drive hard does not me and it does not appear on my computer but it appears on the printer and Devic as a USB to SATA bridge. Why im not allow exploring my hard drive?

  the problem is when I want to explore my drive hard does not me and it does not appear on my computer but it appears on the printer and Devic as a USB to SATA bridge. Why im not allow exploring my hard drive?

  It appears in disk management with or without a drive letter?

  I guess that it is an old internal hard drive you have connected to a third-party device so that it can be used as a USB?

• Driver for my printer not recognized by windows 8. Device

  I tried to install an old printer in windows8. The pilot was not available and none was available at HP. I get the message not recognized usb device and I can't get rid of the message. Chat help or tech support Microsoft have not been able to help. all of the suggestions.

  If this printer manufacturer provides no driver win7/8 and windows update via Add printer has no drivers, its does not work

  And any workaround method will be more expensive than buying a new printer compatible

• DBMS driver exception was: locale not recognized

  I am deploying example demo on weblogic Server intgrated hr using hr on the oracle database schema.

  the HR_EJB_JPA example compile with an error but not deployed and I get this error: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: unrecognized locale [13: 47:27] deployment cancelled. [13: 47:27] - incomplete deployment. [13: 47:27] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer) # can't run application HR_EJB_JPA due to the deployment on IntegratedWebLogicServer error. [HR_EJB_JPA application stopped and cancelled Server Instance IntegratedWebLogicServer]

  What is your locale.

  Can change you to English of the United States, if they are not.

  To change the country or region setting

  1. Open region and language by clicking on the Start button, click on the Control Panel, clicking clock, language and region, and then by clicking on the region and language.
  2. Click the location tab, select your location from the list, and then click OK.

  Refer

  My Java Dev Blog: Weblogic datasource error: locale not recognized after upgrade the Oracle 9 pilot - & gt; 10

  Thank you

• Drive hard internal are not not in devices

  I just upgraded to El Capitan.  What I notice is that one of my internal drives appears on the desktop, but not in my list of devices when I try to save a file, or if I double click on the MacHD and look at the list of devices it.

  Suggestions, please!

  Open utility disk from the Applications\utilitaires folder. If you have more than one drive in your computer (not more than one volume on one disc), then take a snapshot of the utility disk with the selected out-bumpy drive entry window and the other with the entry of the volume back to this same disc. This only for the disk with which you have a problem.

  To post a screenshot

  1. Press command + shift + 4 , which will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button Select a file and click the Insert button.

• Driver webcam, peripheral USB not recognized?

  I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now.  I don't know what to do. Thanks in advance for the help.

  Hello Megan, you can resolve this problem by updating the drivers...

  Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.
  Each of them, install in the order that they are listed below.

  1. Intel 5 Series Chipset cs_intel5series_9.1.1.1027_al00.zip
  2. Simple Face easyface_nb_all_11036.zip
  3. Simple camera app: webcamtool_vr630_xp32_nb.zip

  After installation, restart your PC, and it should work.

  If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer.

• 160 GB external hard drive of Gigastore is not recognized correctly

  Hi, hope someone can help me!

  I bought a 160 GB external drive Gigastore hard today, but the plug inside, the computer did not recognize it. In fact, nothing happened. I tried all the usual as control to see if it was in my computer and then right click my computer, manage, etc computer management, but again, she did not show. I tested it on another pc and still does not work. I'll put up the wires correctly, so this isn't the issue.

  When I turn on the power, the hard drive light constantly flashes blue. I would have thought that will be that the hard drive has been slowed down, that he would stay on continuously without blinking. Could someone let me know if this blinking determines that the disk does not just and it is indeed tired?

  Phil

  Hello

  It seems that it s not a laptop fault because the other laptop or PC can not recognize the external HARD drive.
  Have you checked if some additional drivers or tools were shipped with this external HARD drive device?
  If please connect the HARD drive and use the Add Hardware option