Point by point count in a window

Similar Questions

• Establishment of analysis in point 8.1 of Windows

  The instructions for my all-in-one HP Office Jet 8600 ask me to go to ' Scanner Action/manage scan ' to enable my computer analysis.  These options do not exist on my Surface Pro 3. The system shows "HP Scan and capture" and shows that my document has been digitized.  However, it I cannot save it on my computer.  (Make a right click does nothing.) The document is not anywhere in the document or photos on my computer.  How can I scan and save to point 8.1 of Windows on a Surface Pro 3?

  Hello

  Follow the HP printer install wizard below, who must download and guide you through the installation of the full features software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-122330-1&cc=us&DLC=en&LC=en&OS=4158&product=4323659&sw_lang=

  You could get all of the features from the HP Officejet Pro 8600 icon.

  Kind regards

  Shlomi

• I installed MSSQL 2005 express Server mgmt studio on my xp machine. but when I open it, giving a small error window, but there is no message in it. Only the OK and the exclamation point is on this window

  I installed MSSQL 2005 express Server mgmt studio on my xp machine. but when I open it, giving a small error window, but there is no message in it. Only the OK and the exclamation point is on this window

  Hello Mohan,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the MSDN forums. Please ask your question in the following forum.

  The SQL Server tools general forum

• Laptop HP Pavilion G6: mouse pointer delay after upgrade Windows 10

  I installed Windows 7 to Windows 10. So far, the only glitch is with the mouse. After that I typed, the arrow of the mouse does not move during 3 seconds. I have:

  Looked to reinstall the driver. He said that it is up-to-date.

  Properties of the mouse adjusted to zero delay (from average delay) on pointer after typing.

  Both of the above should have potentially fixed, but as it won't let me update the driver, there is little I can do on this charge. Also, I rebooted it after the latter. It made no difference.

  Another person had the same problem AND fixed it? VAC

  I have it! This guy has the answer:

  https://www.YouTube.com/watch?v=l5gZE2_7gJs

• Effects of recovery point restoration updates of Windows 7.

  Updated Windows Installer updates for Office 2007, and then later due to a bad application install I had to restore to an earlier point. Historical Windows Update displays now that I have the Office updates, but my computer says that I don't have. Is there anyway to fix this?

  Hello Jim
  Please write to the Microsoft Forums.

  (A) Please start in Safe Mode with networking and connecting with the default Administrator account.  Run it in there to see if it will work.
  Here are the steps to start your system in Mode safe:
  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Mode safe mode with networking and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Please visit this link for more information.
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  (B) I would say as you try to reset the windows update components.
  To reset the Windows Update components automatically, click the fix it button or link. Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  For more information, please visit this link
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• System restore calendar is empty, cannot set new points and cannot use Windows help.

  Original title: registry problem affecting system restore etc.

  The system restore calendar is empty, I can't put new points, and I can't use Windows help because I can not type in the dialog box. If the problem is described in the doc #313853, the solution he proposed did not. Defeating my cleanups registry also seems not to help. Any suggestions?

  To all of you who have tried to help me with this problem, I recently came across a solution - I had to reinstall Internet Explorer, which I think had been compromised by my registry cleaner. I never use, so it didn't occur to me that there is something wrong with it. But that seems to have fixed all the problems.

• Weird minimum brightness of T430 capping issue in point 8.1 of Windows

  Hello

  I have a weird problem. I bought my T430 with Win 7 in. Now that I've upgraded to Windows 8.1, the brightness of the display will get weak after a certain point.

  In Win 7, I could turn down the brightness of my screen at a VERY small point. But currently, with 8.1 Win, although I can turn down the brightness of several points, the brightness of the display would be stuck to, say, 20%.

  1. This is the brightness for the 2nd lowest level:

  

  2. now, here, it is at its lowest level. Look, there is still another level to go:

  

  3. Although there is still a level to go (as shown in the image above), if I try to take the brightness to the lowest setting absolute, ABSOLUTELY NOTHING would happen.

  

  This problem occurs in Win 7 Pro. My lowest brightness level was much, much lower in Windows 7 as in 8.1 Pro Win. He started straining my eyes!

  Help, please!

  Thanks in advance.

  Finally! Found the solution.

  Updated my BIOS and now it works fine.

  Thanks the lenovo support team. You guys have been impressive. Keep up the good work.

• Failed to create system restore point exception exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system

  Original title: I can't do a restore point.

  I get exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system what can I do?

  This has happened for a very long time.

  Does really say '... sysdm.cpl "?"

  Is that what the text complete and accurate of what the message said exactly?  (there is no sysbm.cpl in XP, but there's a sysdm.cpl).

  What happens if you click on start, run and enter in the box:

  sysdm.cpl

  Click OK - the system properties box opens?

  What happens if you click on start, run and in the type box (exactly):

  %SystemRoot%\System32\restore\rstrui.exe

  Click OK - is the open window of the system restore?

  What is exactly the process (step by step) you are using when you try to create the restore point and when in the process you see this message?

  I think it's a miracle that the Microsoft support engineer can provide a link to an article when the error message report you is a little out of whack and articles doesn't mention your error message at all.  It's real good troubleshooting or clairvoyance!

  You should also tell us a little about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Black screen with mouse pointer count on reboot after installing SP3

  I tried to install Service Pack 3 on a PC running XP Home Edition (new installation).

  Although Microsoft Update has finished installing SP3 and the computer reboots, I get the XP installation screen base with the message "Please wait...". ", which disappears after a few seconds, leaving me with a black screen with only the mouse pointer.

  The mouse pointer moves then the PC broke down, well that no matter how long I leave nothing happens.

  I tried to uninstall SP3 and do it again (when I Uninstall SP3, Windows starts very well) and also uninstall SP3 as well as my Antivirus and try the installation again. But whenever I'm just left whit black screen.

  Try to update with the custom option.  I had problems like this before.  Usually you are missing a driver or something of this kind that makes you hang.  To update while the custom option, with the exception of SP3.  Reboot several times the installation of updates with the "Custom" option  Once all updates have been installed except SP3, you can try SP3 and see what happens.  This usually takes care of it when I have the same problem. Serving the community one computer at a time www.therushvillecomputerguy.com please post a reply to let us know whether or not our response helped.

• Screen goes black and only the mouse pointer visible to the windows xp screen

  My computer has used to work without problems.  Now, when I start it upward, to the Windows XP start screen, the screen turns off and all that is visible is the mouse pointer.  I tried to start safe mode, and it does give me even the option - not even if I press F8 at startup upward.  What is the problem with my computer and what can do?

  Thanks for your answers, Dena and Jojih.

  The screen went black and all I could see was the mouse pointer.  There is no ameioration or changes on the hardware of all kinds.  I wonder if one of my employees has a virus on the computer.  I could not do in safe mode, even if I tried to press F8.  If I put in the Windows XP CD, the screen would go black after that he loaded the system files, just like at the start of Windows XP.  So I used Acronis PC Backup and Recovery and make a recovery disc and used to reformat the hard drive and then I reinstalled Windows XP.  Everything has been great to work for.

• wlstartup.exe - Entry Point not found in Windows Live Essentials Beta

  I keep getting the wlstartup.exe - Entry Point not found error after installing Essentials Beta. Since I tried to install and now installed Essentials 2011 but I keep getting the error referring to the beta version. How can I remove all references and install an own Essentials 2011?

  Hi rbhicken,

  Check the link and try the steps mentioned below.

  http://www.windowslivehelp.com/thread.aspx?PostID=e6d65021-5b05-43cf-b7a0-f4b546422793#e6d65021-5b05-43cf-b7a0-f4b546422793

  If the previous step fails, then you will need to uninstall the entire program associated Windows live essentials beta and then download and install the valid version of Windows live essentials.

  How to uninstall a specific Windows Live Essentials program

  http://www.windowslivehelp.com/solution.aspx?SolutionID=c861e66a-c839-47C4-a1d5-46b46121fb5d

  For more information send your query in the forums of Windows live.

  http://www.windowslivehelp.com/product.aspx?ProductID=12

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mouse pointer disappears only in Windows Media Center.

  Since I installed windows 7 my mouse pointer will not be displayed in the center of media windows it is there but invisible. all other programs are very well

  Hello
   
   
   
  Try the below listed methods one by one and check if everything works correctly in Windows Media Center.
  
  Method 1.
  Let us disable the traces of the mouse and check if we retrieve the pointer. See the article below for the procedure of
  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings
  
  Method 2.
  If the magnifying glass is about to launch in the start-up, it may cause conflict in this scenario.  Let us minimize Media Center and follow the steps below and check if we get the pointer.
  a. Click Start, click Control Panel and click on optimize visual display in the category of easy access.
  b. clear the check box next to the magnifying glass Tower, then click on apply.
  c. restart your computer and sign in to your account.
  d. you can see in the spotlight one last time.
  e. in case it happens simply close the Magnifier and again to restart your computer.
  f. Once you log after doing this the magnifying glass will be gone.
  
  Method 3.
  If the problem continues to view us in safe mode. It could be a problem with drivers or another application could be at the origin of the conflict.
  Please check if you are facing the same question when working in safe mode.
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, use Windows Media Center and check. (In safe mode Windows Media centyer wil not play videos)
   
  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pointer moves randomly in Windows 7 and Office Products

  Windows 7 has a slider that randomly appears & move my cursor on the screen in all places.  This also occurs in office products.  Something also prevents the pointer from moving when I am sliding my finger on the pad.  Is there a way to disable this option, so I can control the pointer with the touchpad?

  The touchpad IS the problem.  Pick up a mouse and disable the touchpad and you will see.

  Good luck.

• Mouse pointer jumps around on Windows 7 VM

  How to make it behave?
  I have a Windows 7 VM with VMware tools installed.

  These preferences are set:

  • Take the keyboard and mouse input on the click of the mouse.
  • Automatically capture and ungrab the mouse.
  • Hide the cursor to ungrab.
  • Optimize the mouse for games: never

  Often, the mouse pointer passes to a new spot when I click it.  For example, without exit fullscreen VM, I click on the center of the screen one pointer jump upward or sometimes low.  Click once again, the same thing.  I tried to uncheck Hide toolbar without result.

  In addition, the virtual machine is maximized on my second monitor, if I move outside it to my main monitor mouse may not work.  In other words, if I click on an object, say Outlook, nothing happens.  It is as if the mouse is not there; the click does not happen.

  This does not happen with my XP VM.  On the virtual Windows 7 machine, Windows is not activated yet.

  I gave up and created new WMs.  They work very well.

  Remove the old VMs of misconduct.

• Cannot update files have point 8.1 of Windows when you use illustrator CS5.1

  A really weird problem started today.  I am able to open and work with the files have.  However, when I save the work, the original file exists, no not update work.  I closed and open the AI and restarted the computer.  But I'm still in the dark. Can I save my work under a new file name.  Hoping someone solved this problem without reinstall illustrator.

  Washio,

  I remember my having seen this (or similar) issue before, but I can't seem to remember the cause/solution.

  He could have (something on) the list below. "resettlement is the last resort 6). ((1-2) are easy and safe. (3-4) are on preferences, ireversibly and reversible. (5) is a collection of other options, some of which may be relevant.

  I also mentioned something on external downstairs, in case that can be taken.

  In any case, I hope that you report your findings, for each of us to know and remember (I hope).

  Sometimes, (some) things can stop working for no apparent reason. When (other) possible reasons/remedies do not work, it can be a kind corruption (temporary or permanent) that can be cured with something on the following list. It starts with a few easy suggestions and safe) 1 and 2) for less severe cases and continues with two 3 ways) and 4) preferences of the society (irreversible and reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how far to go.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

  External media: it is generally recommended here for open/save from/to clean hard disk and to copy to and from networks and removable media. You maybe lucky (for a while), but the chances of corruption of files and other unpleasantnesses are immensely greater when you use something else than the hard drive, and it is better safe than sorry.

  In addition to the (much longer) risk of file corruption, some issues are mentioned here:

  http://helpx.Adobe.com/Illustrator/KB/Illustrator-support-networks-removable-media.html

  To have a network really work requires little work.

  Make sure that you do not mix Mac and Windows on a network: you must use a Mac with Mac machines and a Windows Server with Windows machines.

  If you go through external means, it is always safer to zip/compress the file to avoid corruption.