pointer icon mouse Windows 7 spinning circle after the installation of the printing HP 8600 wireless software.

Similar Questions

• Windows updates always installed after the return to a previous restore point?

  A restore point to bring victory 7professional. What will happen with the windows updates that came after the restore point?  Clicking on updates windows just always looking for updates, nothing happens. Updates are received before the restore point still installed?

  Windows update itself creates one in order to make them reversible. To resolve the issue, see updated:

  Windows 7 update problems? First read this.

  Best regards, VZ

• Upgrade Windows 8 Pro blocked after the first reboot

  I have a HP Media Center PC m7470n. When I upgraded with Windows 8 Pro disc, after the first reboot, it gets stuck on the Windows form with turning points. He's not going back to XP and when I stop and restart, he goes right back to the same screen. I tried to boot from a hard drive and CD ROM with the disc in. I also tried to do a system restore, but it still maintains just that goes back to the same screen. , I even contacted Microsoft Support and after 1 1/2 hours, I had to let go because I had to go to work and they do not have a solution for me. I am not able to go in Mode safe either. Can someone help me with this update or at least get back to XP so that I can at least use my computer? At the moment I feel that Windows 8 Pro comes to have my computer in an oversize weight.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you can not connect to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• Windows must now restart because the print spooler service terminated unexpectedly

  I have a PC running on Windows Vista professional that I had for about a year with two printers that have also been all this time, a HP LaserJet 1000 and an Epson SX105.

  This morning, amid a series of PDFs (separate files) printing on LaserJet printers, I suddenly had the following pop-up message:

  "Spooler SubSystem App stopped working and was closed".

  On the Control Panel, I found that my two printers have apparently disappeared.  My first reaction was just close and restart the computer, often kind of seeds.

  To restart, I tried to print again, but I was told that I had to install a printer.  Trying to install a printer, I learned that I could not because of a problem with the spooler.  I looked online to find a solution and one that suits (without touching the registry) seemed to be to check the operation of via Control Panel's print spooler, and then restart.  Oh dear.  What a mistake!  I did this and found that the printers have reappeared, but then about 30 seconds later, I got the following pop-up message:

  "Windows must now restart because the print spooler service terminated unexpectedly.

  Each time it restarts the message comes back after less than a minute and restarts on another 30 seconds later, so I have a chance to try a system restore (I installed the last service pack Vista a couple of days), or something else... it's just in a loop of perpetual reboot, I can't stop restarting Windows.

  How the hell do I?  (I send this message using my Vista laptop and pray the same problem occur here, too, so I don't have to print anything).

  Hello

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check the Mr Fixit here and if you use the other methods go back and try again later.

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  ------------------------------------------------------
  Clean the General corruption and replace all the lost files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After the program of doggle wireless Vodafone makes a connection to the internet, I get a Freebee screen Awards with a code number on it

  Original title:

  An outdated warning occurs on my computer just after the program of doggle wireless Vodafone makes a connection to the internet and stops everything works until I close. The notice tells me it's Freebee Awards with a code number on it to enter my reward but it is out of date and useless. How can I remove it from my Windows 7 computer.

  Hello

  1. If you connect the dongle from Vodafone to another computer, you still experience the same issue?

  2 have you made any changes to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: All data that are infected can only be cleaned by deletion, which means that there is a risk of data loss.

  For more information about Vodafone Rewardz,.

  https://rewardz.Vodafone.co.UK/

• All of a sudden, I can't print any web page. After the print command, she wants to save it to an XPS file.

  All of a sudden, I can't print any web page. After the print command, he wants me to save a file in XPS, and I can't spend.

  This has happened

  Each time Firefox opened

  Is a few weeks ago

  In the print dialog box, change the selected Microsoft XPS Document Writer printer in your printer you want.

• Color LaserJet Pro CM1415fnw multifunction - print that hangs or restarts printer after the print request

  I am using a LaserJet Pro CM1415fnw with a wireless connection and a USB connection, for several years with my MacBook Pro, spanning several evolutions of the Mac OSX (Mountain Lion, Lion, Mavericks) without incident.

  Today, no reason apparent, the printer started to expose the problems of processing printing orders sent, through the wireless and via the USB port.

  When you try a wireless connection, the print queue to fill up and the LCD will display printing in progress (with no impression caused), then the screen would just whiten and the printer would appear to restart, with the HP logo, and then subsequently return to the normal display mode, as if she was ready to print or copy, no matter.   No printing would take place, and the print queue would remain as if there is a current print job, with no impression caused.

  When you try to use the USB connection, the print queue indicates that a print command has been sent to the printer, but then, he did the same wireless, with the LCD screen goes white and apparently to restart the printer.  The print queue is populated, but printing never takes place.

  I have reset the printing system several times, removed and reinstalled the printer several times (wireless W USB connections), use the HP utility to try to install the printer, download and install the latest version of the driver for the device, rebooted the MacBook Pro, etc, etc.

  The ONLY thing that can print at this time is if I use the HP utility software, and receive information from device and then use the PAGE printing CONFIGURATION - then and then only, the printer responds immediately and prints the page, just as it was always in the past (until now!).

  I have tried everything I can think, for several hours, and can not understand what the problem might be.

  Any idea to solve this problem would be greatly appreciated!

  Norman,

  Thank you for your constant perseverance on this issue.  I forgot my post here, until I received a notification today about your response to date.

  Curiously, I "stumbled" upon the cause of the problem recently, and he had NOTHING to do with the printer or the MacBook Pro OS X (recently updated to Yosemite).

  It turns out that the problem was in the PDF file that I was trying to print!  Periodically, I'll print PDFs to a particular Web site, and it is these PDF files - exclusively - who made the mistake of communication between the computer and the printer.  The problem with PDFs is unique to the Mac OS X, because I can print the exact same PDF files from my laptop running Windows without problem.

  I have no idea what the "Bug" in the East of PDF files... probably never is, but given that I can do what I need to do with a Windows laptop, my problem is solved.

  I contacted the Admin on the website where I was printing the PDF files they offer, to make them aware of the situation.

  Thank you for your interest and your help!

  Dave

• XDC-&gt; print a blank page after the print job

  Hi people,

  I have a problem. I use a xdc file to select several bins and after the print job extra separator sheet must be "printed". It is just a blank sheet, which should be at the end of the printjob.

  Could someone give me a hint? I checked the pcl commands and I had the idea of sending a newline and return order, but I'm not sure whats happen and if possible, could I select the status bar for this?

  Thanks a lot for any idea or tip,.

  Kind regards

  Alex

  Hello

  the easiest way and the best way is to do an additional form with additional software and you can control this after your program in the transaction v/40 put this in the output type.

  so, it works!

  KR

  Alexx

• Windows does not start after the most recent update

  I have 64 bit Vista and Office 2007. There was a group of updates for the latter in February 2011. Something in here is stop Windows at the login screen. Workes mouse and keys stick, but it won't take me to the password screen. Only way to get around it was to go in safe mode and do a system restore to remove the updates. Any suggestions?

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8 reset the advanced settings of the IE by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  9. open Internet Explorer (32-bit) only to http://support.microsoft.com/kb/971058 [ignore APPLIES to section] & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Left Mouse Button functions any longer after the last update no.

  After the last update, the left mouse button no longer works, I contacted HP who says that it is Micorosfts question.  When I asked the representative of the conversation, only not HP uses Microsoft Windows HP computer and said that if there is an update then also that Microsoft is responsible as well as HP as HP uses Microsoft products in the computer.  So, apart from that, I have not got absoblutly no supported.  I restored my computer to an earlier time.  Once more the left button of the mouse does work, so now, in this sense.  Microsoft since it is the problem of software due to the update you gave, apart from making a full recovery on my computer, are there updates to counter what had made the last update?

  Chingy salvation,

  Have you tried following this http://support.microsoft.com/kb/315539 kb and the removal of all drivers (even the most 'ghosts' or greyed out) for the mouse who is or has been on your system? Sometimes, there is a driver that conflicted with the new that can cause this problem.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Windows 7 Desktop inadmissible after the closure of other applications

  Hello

  For much of this week I noticed some little quirks with the operation of windows 7 and some of its applications such as windows Explorer and internet explore.  However, today the most baffling problems confronted me.  As soon as my computer is updated, or directly after a reboot, everything seems fine and I am able to open directly the office applications.  However, after closing my browser to internet explorer or windows windows Explorer all icons on the windows desktop are block.  The button on the start menu and the taskbar continue to work as usual.  During my resets in the attempt to solve this problem, I noticed that the reboot process takes much longer than usual to complete.  Analyses of virus using AVG found no problem, which is ' sfc/scannow' from the command running as prompt suggests a similar thread.  It is a genuine copy of Windows 7 which has been updated since Vista about 4 weeks ago.

  Any help would be appreciated.

  AVG alone is not enough to determine whether your computer is free of malware. Analysis further by:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Then if the problem persists, perform diagnostic mode startup to determine what is running in the background the origin of the problem. You can also use the built-in Windows 7 troubleshooting tools is clean looking for clues.

  How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135

  Troubleshooting Windows 7 Action Center -http://www.winsupersite.com/win7/ff_action_center.asp
  Troubleshooting Windows 7 - http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  MS - MVP - Elephant Boy computers - don't panic!

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

• Windows does not start after the installation of NVIDIA GeForce FX 5500. Help!

  Before, I had a Sparkle GeForce2 MX400 64 MB AGP Graphics Card with the installed driver. I have not had any problems with him, but I need to upgrade, so I got a NVIDIA Inno3D GeForce FX5500 256 MB 128 bit AGP graphics card. So, the thing is, before I installed the driver for it, the computer was working fine, but of course I can't play games. So I downloaded the driver from NVIDIA (175,19 I think), and I installed it in safe mode to avoid any conflict with my antivirus. The installation is complete, and the system restarted. Everything was going well until after the windows logo (by the way, I'm on Windows XP Pro SP3), when the system crashed all of a sudden. The screen turns off, the unit of the system itself was still on, but it does not. I tried enabling / disabling the NumLock, CapsLock button to check if there is an answer, but I have nothing. I manually turned the computer off, waited for about 3 minutes, the market again, but again, the system crashes after the screen Logo of Windows XP. I started in SafeMode again, uninstalled the NVIDIA driver, restart the system and everything went back to normal. I retried my old 64 MB AGP card and it still works fine. I really need to install the driver to make the most of my 256 MB graphics card. Can anyone help please?
  So far I did the following:
  1. re-installed Windows XP
  2 re-installed the driver NVIDIA about 5 times already.
  3. update all the drivers of my motherboard.
  4. completely removed all traces of NVIDIA using Drive Cleaner and put it back.
  5 installed DirectX 9.0.
  Still, none of them worked. Help!

  Here are my computer specs:
  OS: Windows XP Pro SP3
  Motherboard: ECS 661FX-M rev 1. 0 b
  Processor: Pentium 4 2.4 GHz
  RAM: 768 MB
  HARD drive: 1x80GB IDE slave, 1x20GB IDE Master
  BIOS: Phoenix Tech, LTD 6.00 PG 01/18/2006 v2.2
  Antivirus: Avast free Antivirus v6

  Any help would be appreciated. Thank you! :)

  PS: I know that my computer is really old. But please don't advise me to upgrade the entire computer or something like that. I can't afford to buy right now a new. Thank you.

  Hello

  I suggest to start the computer in safe mode and check if you can start.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If you are able to start the computer in safe mode, then go to Device Manager and uninstall the drivers for the graphics card and restart the computer.

  If it boots fine in normal mode and then try to install the latest drivers in normal mode and check if that helps.

  Check if that helps.