Pool view 6.1.1 horizon with persistent drive

Similar Questions

• ThinApp with persistent drive

  Hey everybody,

  I'm just getting started with ThinApp in our production environment, so my troubleshooting skills are not quite up to the height.   I created a package ThinApp for WordPerfect that integrate with our document management system to open files.  This package has been tested with success in all of our office except our persistent desktops VDI images.  I don't know if the drive D:\ is originally a hiccup or not and I don't really know how to start troubleshooting.   We use ThinApp 4.6 with the VDI in XP SP3 workstations.    Any help would be greatly appreciated.

  Just remove it from the Explorer... Normally, is it stored in the users roaming profile (C:\Documents and Settings\NomUtilisateur\Application Thinstall) and Thinstall folder but can be located anywhere, so long as the user has change your permission for the location. Find the corresponding Sandbox and click on remove...

• Persona with persistent drives management

  What is the best documentation out there on the management of the persona?   Y does it have that docs step by step are there.

  Here is the guide of deployment of VMware Persona.   http://www.VMware.com/files/PDF/view/VMware-view-persona-management-deployment-guide.PDF

• Cannot connect to Horizon view Desktop with the persistent drive user's profile

  I install a new pool of funds to Horizon 6. This will serve to staff supervisor who need their same desktop computers every time that they connect. The pool is set for the linked clones, but with records of enduring for user profiles. I put the user profile to be stored on a disk, persisting in the wizard of the Horizon. The persistent drive is on users 'Z' drive.

  When I try to log in with one of the title, accounts, windows gives me this error:

  The user profile service service has no logon. User profile cannot be loaded.

  Is there something I need to change Active Directory / group policy? I've never dealt with before persistent disk systems. The VM OS is Windows 7 Pro x 64.

  It seems fitting that profile does not know that it is supposed to be created on the persistent drive when I try to log in.

  I discovered that I actually had the following GPO is applied at the level of the computer that kept player to be accessible.

  Access to the removable storage / system

  Policy	Setting	Comment
  All removable storage classes: deny access to all the	Activated
  All removable storage: allow direct access in the sessions remotely	People with disabilities
  CD and DVD: deny execute access	Activated
  CD and DVD: deny read access	Activated
  CD and DVD: deny write access	Activated
  Floppy drives: deny execute access	Activated
  Floppy drives: deny read access	Activated
  Floppy drives: deny write access	Activated
  Removable disks: deny execute access	Activated
  Removable disks: deny read access	Activated
  Removable disks: deny write access	Activated
  Tape drives: deny execute access	Activated
  Tape drives: deny read access	Activated
  Tape drives: deny write access	Activated
  WPD Devices: Deny read access	Activated
  WPD Devices: Deny write access	Activated

• Impossible to mount the persistent drive - trying to deploy the first pool of offices and do not. -View composer agent initialization failed

  Hi all

  Complete errors:

  Discover the State of the agent (22) composer initialization error: cannot mount the persistent drive. Please check the VM parent if an existing drive uses the same drive letter. (expected 0 seconds)

  State matching: matching...

  By:xxx.xxx.xxx.local set up

  Attempted theft by:

  Error commissioning took place for Machine xxx: View Composer agent initialization failed

  I am currently deployment of VMWare view for the first time in a test environment and have hit a problem I have not been able to get around despite several searches on google and trial and error.

  Hoping that someone here could suggest something.

  View the VMWare versions are all 6.0.1.

  vCenter is on a device.

  VMWare view connection manager is on a 2012 R2 VM server.

  VMWare view dial is on a separate server 2012 R2 VM.

  I have a 2012 SQL on a separate server 2012 R2 VM Server installation.

  SQL databases have been set up for the composer to be able to reach it, it uses ODBC 64-bit via SQL Server Native Client 11.0.

  I tried troubleshooting by exchanging 32-bit, but this is not connected, it seems so 64 bit is correct.

  I have a windows 7 64-bit Enterprise Edition VM under my Golden image. There are VMWare tools on it and the VMWare agent on it.

  The virtual ipconfig/release performed top machine, he was then stop and a snapshot taken as my source.

  The problem is that when I go to deploy a pool of offices, I get the above error.

  If I connect to the VM created via vCenter readers persistent and temporary show very well.

  Based on the error, I tried different settings such as change the path for the reader of DVD VMs of D: to Z:, spread unique persistence and the temporary disks on multiple data-stores or data stores and even remove the drive of DVD of VMs completely. I have also looked at newspapers under composer view but find nothing to explain the behavior.

  SQL Server seems to work for configuration through the error logs and virtual machines are created and added to AD as expected.

  I must point out that the virtual machines are as linked clones.

  Can anyone offer a clue as to the cause or something, I can check it please, did everything I can think and Googling the error does not come to the top with something useful so far.

  Thank you

  IF you use an Agent 6.0.2 Please downgrade 6.0.1 agent and let me know the results

• Right to the pool view

  Hello

  Scenario: Have seen Horizon 5.3 Configuration.  Having created the pool view. Entitled to security Active directory global groups to the pools of the view.

  While assiging users to view pools, add us users to the Group of active directory to Active directory and then set it to view VDIs. During this operation we are faced with a pop - up that 'add a user as an individual right.

  To my thinking, that I shouldn't get this sub group that has the right to pool view to this user as a member. If the user benefits indirectly pool view.

  Additinally, we have checked "Enable automatic assignment", but we still need to adopt this manual method of assigning users to view VDIS we must also provide administrative rights to users before allowing them to access the VDI. So we manually assign VDIs to users and admin rights.

  Any help on how I could avoid this pop-up message?

  Why you add the users manually if you have already added the ad group?

  "Enable auto-assignment" have nothing todo with the admin rights, it basically automatically chooses which office will be assigned to the user.

  Linjo

• Map viewer editor do not work with Java 1.8.0_45

  I installed Oracle Map Viewer Ver11_1_1_7_2_B131022 on a server with Windows Server 2012 in a database 11.2.0.4

  It is the new version of Java installed 1.8.0_45 on the client PC.

  I can start the Administration Console, but I can't start the editor.
  

  What should I do to get the Map Editor Viewer running?

  Thank you very much for the help.

  Gabi

  Hi Gabi,.

  new versions of java introduced the security restrictions for applets.

  You can try adding the following URL in the exclusion of the Java control panel security settings list:

  http:// : port#/mapviewer/faces/admin/admin_editor.jsp

  Best regards.

  João

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

• Using Bitlocker with Flash Drive

  Two flashdrives have been encrypted by bitlocker. When I mount the two flashdrives, in windows Explorer, each of them appear with a lock or (drive F and G drive). When I unlock the two discs (by entering the password) a grey lock appears on drive F (as it should), but no lock appears on the G drive. Also, after you have unlocked, I am able to view the content encrypted in the two discs without difficulty. When I right click on the 'F', the menu that appears includes a choice of "manage bitlocker. When I right click on the disk 'G', the menu does not include the "manage bitlocker. When I eject the F drive by right clicking and pressing the "eject" drive F goes away from the screen to the windows Explorer (as it should). When I eject the G drive by right clicking and pressing 'eject', don't disappear from windows Explorer screen, it seems to be stuck.

  The 'F' flash player seems to behave correctly, but it seems that the 'G' flash drive is not fully recognised by the bitlocker. What is the problem with the drive flash "G"?

  Hello Ted,

  Thanks for posting your question on the forum of the Microsoft community.

  Thank you to provide detailed information on the issue.

  Sometimes, if Bitlocker Drive encryption does not complete successfully, this problem may occur.

  I suggest you even encrypt the affected drive with Bitlocker and check if it helps.

  Please use the suggestions provided in this article and the Coachman.
  Reference:
  Guide step by step for Windows 7 BitLocker Drive encryption
  http://TechNet.Microsoft.com/en-us/library/dd835565 (v = WS.10) .aspx

  See also:
  In Windows 7 BitLocker Drive Encryption: frequently asked Questions
  http://TechNet.Microsoft.com/en-us/library/ee449438 (v = WS.10) .aspx

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I want to re install with a clean sheet. I have install, but my old catalog loads again. How do I delete catalog and where it is stored. I lost some of the media that came with my drive by accident so I need to re install

  I want to re install with a clean sheet. I have install, but my old catalog loads again. How do I delete catalog and where it is stored. I lost some of the media that came with my drive by accident so I need to re install

  HI ATR

  Just update you 13 windows 7 items... I sat until midnight and found the program data and ended up finding the catalog. I deleted the catalog now. and uninstalled items 13. I hope that when I reinstall it will be like new, and I can go back again. I had messed up I saw when viewing the photos in the media, it was media files and thought they shouldn't be there so I deleted them. Maybe thinking about now I get an error. Before, I made a slideshow with the media from the drive. I just started using elements 13 I used windows live previously for videos. Can you let me know also what photoshop elements or first, you use the most.  Also if I import video files in why do I see them I think of thumbnails. That's where I went wrong and thinking, they shouldn't be here. I brought a few books and trying to go through the learning process. What camera do you use?  Many questions sorry. Thanks for any help.  Russell

• can I share documents in iCloud drive with another drive to iCloud user?

  can I share documents in iCloud drive with another drive to iCloud user?  If so, how to do that?

  No, at the present time, iCloud is configured for use by a single account to share data between devices of the owner of this account.  Your best bet for what you are looking for would be to use a third party application like Dropbox or Google Drive.

  You can share files individual even if - iWork sharing links to documents in iCloud - Support Apple iWork

• Equium A210: "tsst corp ts-l632h" firmware is not compatible with my drive

  Last year I had an Equium A210 17l of pc world. I recently bought some dvd - r tdk discs and the drive cannot read them. It's as if there is no disk in the drive.
  So I thought I'd hunt around to see if there is updated firmware for the drive. I downloaded the firmware from this site, but when I try to update it says that the disc is not compatible! Evey bit of software I said the player is a * tsst corp cddvdw ts-l632h * with firmware to01.

  The firmware I'm trying to download is [this | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 382 & selSeries = 173 & selProduct = 742 & STAS hortMod = 680 & language = 13 & selOS = 26 & selType = 50 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = 8 & electedLanguage s = 13 & type = 50 & page = 1 & ID = 63137 & DISO =-1 & driverLanguage = 42]

  But whenever I try to run it it says that it is not compatible with my drive! What is going on?

  Jim Venner

  I recommend you to first install the 2 firmware until the you´re trying to upgrade the drive with the a3 because it is possible that the a3 requires the 2.

  Please visit the site to download drivers, download the firmware 2 and check if it works.
  Would appreciate any comments on your part.

  Welcome them

• Since the Safari update to the most recent, problems with Google Drive

  Since the update of Safari to latest, problems with Google Drive

  There are serious issues with Google Reader itself at the present time.

  Google is working on it.

  I suggest stop smoking GoogleDrive and remove (with the minus sign) of the SystemPreferences-> users & groups-> LoginItems.

  Until further notice. Take no risk.

• Need help with DVD drive - Qosmio G30

  Hello

  Sorry, my English is so bad. I need your help. I have a Qosmio G30 (PQG32E) and I have a problem in the DVD player. I see a (!) instead of the DVD drive in Device Manager. I think it's a problem with the driver. I don't know what I can do to solve this problem.

  Please can you help me?

  Perhaps this problem can be solved very easily.
  Have you noticed a code error 31 or 32?

  Possibly a registry entry is corrupted.
  Go into the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Remove the drive from Device Manager CD/DVD, and then restart the laptop.

  I would appreciate any comments from you.

  Good luck