Pools of IP on ACS 5.0

Similar Questions

• IP Pool GBA 5.1

  Hello

  Anyone know if it is possible to configure the Pools of IP on ACS 5.1 so that we can assign these addresses to VPN users by using political elements/access policies?

  I managed to set up a static address for a single user, but not a pool of addresses to a group of them

  Thank you

  Hi,

  Unfortunately, GBA 5.1, IP pool feature doesn't is not supported, please see the release notes, under the section "features not supported:

  Relaese Notes
  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/release/notes/acs_51_rn.html#wp122068

  HTH

  JK

  Please evaluate the useful messages-

• Alternative ACS 5 ip local pool

  Hello

  We have the problem with ACS 5.3, that local ip pools are more supported. Until we have a 4.2 ACS where worked the PPPoE configuration below (the pool has been configured dynamically in the user attributes or group of ACS 4.2). Now we would like to use a local DHCP pool (pool INTERNET) for some of the PPPoE clients, but at the same time, we have a few customers who should have a static IP address (managed by a box-IP-Address).

  Now we have the problem, that the DHCP pool is not used for dynamic PPPoE clients, can anyone help?

  local group AAA of ADSL ppp authentication RADIUS

  AAA authorization network group local ADSL RADIUS authenticated by FIS

  start-stop radius group AAA accounting network ADSL

  AAA accounting system default start-stop Ganymede group.

  INTERNET IP dhcp pool - new

  import all

  network 192.168.1.0 255.255.255.0

  .ch domain name

  !

  IP vrf ADSL INTERNET

  RD 65500:101

  Route target export 65500:101

  Route-target import 65500:101

  !

  interface Loopback3

  IP vrf forwarding ADSL INTERNET connection

  IP 10.10.10.10 address 255.255.255.255

  !

  interface virtual-Template1

  model description of the incomming PPPoE sessions

  MTU 1492

  Loopback3 IP unnumbered

  not the peer default ip address of - old

  ! peer default ip address dhcp-pool INTERNET - new

  KeepAlive 5

  PPP mtu Adaptive

  Protocol chap PPP authentication ADSL

  authorisation of PPP ADSL

  Accounting ADSL PPP

  !

  ! IP local pool INTERNET 83.144.249.1 83.144.249.254 group ADSL - old

  Thanks a lot and best regards

  Dominic

  Hi Dominic

  As we have already tested together in the lab, the following RADIUS attribute works for you, then you can always use the "local ip pool" on the router:

  Attribute: cisco-av-pair

  Value: ip:addr - pool = TEST

  Best regards

  Heiko

• Whence the ACS server get the DNS Info for the IP pools?

  I'm changing the DNS servers that my VPN users are assigned from the pools of IP on the ACS server. Where IP pools Gets the DNS server information. I changed the IP addresses of the DNS on windows server and rebooted. But VPN clients are always assigned the old DNS servers.

  ACS ip pools do not grow the DNS server information

  It is either transmitted from the setup of group for the VPN concentrator or

  It is to be send to the setup of the user/group ACS > attributes Radius (VPN 3000) > [026/3076/005] primary DNS.

  I hope this helps.

  Concerning

  Rohit

• ACS 5.4 ASA 8.2.5 disable AAA for the particular user

  Hello!

  I want to disable journaling Ganymede + for the particular user. This user is used only for automated (python script) pooling of vpn tunnel ASA (limited command set - permission on ACS) group to verify the number of users authenticated via VPN. The problem is that this user generate a bunch of logs according to authentication authorization and accounting on ACS. Is there a solution, disable Ganymede + newspapers on ACS for this particular user? Maybe it is possible to modify the AAA on ASA to not connect this particular user?

  Thanks in advance.

  Hi Pawel,

  You can create filters collection for that specific user. When you configure monitoring filters & Report Viewer does not record these events in the database.

  Navigate to: Configuration of the analysis > System Configuration > filters Collection > add a filter

  What follows is the attributes that can be used. You must use the user.

  -Access service

  -User

  -Mac-add

  -Nas - IP

  Example: We get several hits of ASA by 'user' and we want ACS to ignore it. Create a filter by using the user. ACS must now ignore any attempt from the IP Address of the NAS.

  Jatin kone
  -Does the rate of useful messages-

• 3005 integrated VPN with ACS and server RSA auth

  Hi guys, I have a VPN 3005, using the version 4.7.2.B version, and I have the following problem.

  When a remote user using the Cisco VPN client tries to connect to the VPN 3005, it must try twice to authenticate.

  The first test, the user is authenticated, but the connection is immediately undermined by the peer.

  After the second attempt, the user is authenticated ok.

  Pablo,

  When you use RADIUS authentication on the hub, the ACS server will automatically send all the attributes of the user towards the concentrator for the user who is connecting. There is no need to have the authorization to be configured on the RADIUS server.

  According to the newspapers, it looks like the IP pool is the problem.

  [GroupP] user group [tuser] obtained IP addr (192.168.32.128) before launching the Cfg Mode (active XAuth)

  Subnet mask of the user [tuser] sending [GroupP] (255.255.255.224) group to the remote client

  User group [GroupP] [tuser] attempt to assign network or broadcast IP address, remove (192.168.32.128) of the

  After that, I see the customer negotiation again and the client is connected.

  Thus, the IP address is removed from the pool. Please make sure that you set up a pool that does not have a broadcast IP address.

  Thank you

  Gilbert

  Write it down, if this post can help.

• Based on the IP NASport address pool of IP allocation

  Hello

  using ACS 4.2 and I can't find a way to bind a port entering sin to a specific Pool of IP:

  When a user connects to the auth application is derived from 2 possible NAS ports randomly (it can not change).

  Function that makes SAR demand determines the necessary IP range, so I need 2 Pools of IP.

  There is no way of knowing "If request arrives from NAS1 give Pool1 IP and if the request comes from NAS2 give the Pool2 IP"

  I went around and around with NAFs, and NARs, but this is impossible.

  I can create 2 groups of ACS with the specific NAS and breast-specific IP pool, but then I can't have a unique username linked to the two groups.

  I moved the authentication to an ad group in the hopes that I could link this same ad for 2 groups ACS group; and therefore have a unique username, but not joy.

  Someone met by the problem before? There is simply no way to do it (probably not)?

  
  Hi,
  using ACS 4.2 and I can't find a way to bind an incoming NAS port to a specifc IP Pool:
  When a user connects the request to auth comes from 2 possible NAS ports randomly (this cannot change).
  Depending on which NAS makes the requests determines the IP range required, so I need 2 IP Pools.
  There is no way to say 'if request comes from NAS1 give IP from Pool1 and if request comes from NAS2 give IP from Pool2'
  I have gone around and around with NAFs and NARs, but cannot do this.
  I can create 2 ACS groups with the specific NAS and specific IP pool within, but then I cannot have a single username bound to both groups.
  I moved the auth to an AD group in the hope that I could bind that single AD group to the 2 ACS groups; and so have a single username, but no joy.
  Has anybody come across the problem before? Is there simply no way to do it (surely not)?
  
  

  Hello

  Try to assign ip pools in the user tab and pool server from there, you can select the pools to which user should obtain the ip address, whereas it is authenticated.

  Hope to help!

  Ganesh.H

• ACS seems to forget IPs assigned to VPN connections

  Hi, I hope I am posting this in the right place and give the illusion that I have a pretty good idea of what I'm talking about. Otherwise, I apologize and would be recognizing all relevant entry.

  My problem is that after authenticating correctly to ACS/RSA, VPN users receive a correct of the Pool of IP in their respective IP address, but GBA seems to forget that the IP address was assigned after a while so, for example, it shows 0 assigned IP address when the firewall reports that there are 4 active connections. What will happen inevitably, is that someone will eventually get assigned to an IP address previously assigned to an already existing connection, causing 0 connectivity on the network to the VPN user.

  I assume this is a failure of communication between the firewall and the ACS in terms of which connections are still alived and IPs should be available.

  Can someone idea me in mechanisms to interact the ACS and the firewall with regard to connection information active any experience or knowledge with this problem or maybe?

  Thanks in advance.

  
  Thank you for the response. It is currently set for 2 hours, but I guess I'm confused as to some of the terminology in regards to it releasing IP addresses not in use.
  For example, if there is a valid VPN connection for 4 hours, it seems that the ACS will recover the IP after 2 hours, so does that mean 2 hours in, the IP will get re-assigned regardless? Or is there supposed to be some mechanism in place that says the connection is still valid so the IP is kept assigned beyond the 2 hour period?
  Thanks again.
  

  Hello

  I do not think that there is a mechanism if ACS provides to the client the ip address, but yes, you can adjust the time of realease. I suggest you make time to 5-6 hours, we set up in our data center, the time is so great, it's the fact is that the user may not work for more than contnous for 5 to 6 hours if at all then connection will break and once agin it will be assigned to the new ip address once the user connects. It won't be problem in the normal network.

  Hope to help

  So useful don't rate

  Ganesh.H

• ACS - host restriction

  Hello

  How to restrict access to a specific host when a user connects via the VPN.

  user account is mapped to ACS as external database (Active Directory - Win3K)

  Download ACL works only with the local ACS database.

  Help, please.

  
  Thanks Ganesh for your help.
  I am not clear with your steps.
  Local ACS database users DACL is working.
  For Windows AD users what steps I need to restrict for specific host and port.
  
  

  Hi John,.

  Users Windows AD would receive some ip once they are authenticated if outside these ip address pool configuring trusted ip address that can access ACS outside windows authenticated AD users ip address.

  Go to the link below will share the stage to restrict the access to ACS using the selected ip address.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/a.html#wp655148

  Hope to help

  Ganesh.H

• Question: how to assign the VPN IP VPN client user using 5.4 ACS?

  I'm new to ACS5.4.  What I want to achieve is to leave the ACS5.4 to assign IP addresses to users who are connecting to our ASA using the Cisco VPN client.  ASA runs as a Radius of ACS5.4 client, and we have tested successfully for Radius Authentication.  But users always get "unknown error" in the client VPN, after to be authenticated successfully.  I think I used probably incorrect RADIUS attributes to an authorization policy.  Here's what I did:

  1. in the elements of the policy-> authorization permissions->-> authorization of network access profiles, I created a new profile and this profile is called the Radius CVPN3000/ASA/PIX7.x-DHCP-Network-Scope attribute.  An IP address is entered under this attribute as a static value.

  2. then, in access policies-> services-> client VPN IPSec with RADIUS Access (it's politics that I created)-> permission, I created an authorization policy allowing RADIUS previously created profile in order to be used.

  I missed something?  Maybe I got the wrong RADIUS attribute?  Thanks in advance for any help!

  ACS 5 doesn't have the ability to provide the IP addresses between the pools of IP addresses defined in ACS.

  You must assign static users on basis by user on ACS 5. You can also create a pool on the SAA and tap the name of the ACS 5 pool

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html#wp216411

  Jatin kone
  -Does the rate of useful messages-

• IPSec vpn cisco asa and acs 5.1

  We have configured authentication ipsec vpn cisco asa acs 5.1:

  Here is the config in cisco vpn 5580:

  standard access list acltest allow 10.10.30.0 255.255.255.0

  RADIUS protocol AAA-server Gserver

  AAA-server host 10.1.8.10 Gserver (inside)

  Cisco key

  AAA-server host 10.1.8.11 Gserver (inside)

  Cisco key

  internal group gpTest strategy

  gpTest group policy attributes

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list acltest

  type tunnel-group test remote access

  tunnel-group test general attributes

  address localpool pool

  Group Policy - by default-gpTest

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  accounting-server-group Gserver

  IPSec-attributes of tunnel-group test

  pre-shared-key cisco123

  GBA, we config user group: VPN users. all VPN users in this group. ACS can visit his political profile: If the user in the 'VPN users' group, access ACS.

  When we connect from a VPN Client to the server, all users connect to success. When you see the parser in ACS journal, each user success connect also get

  error:

  22040 wrong password or invalid shared secret

  (pls see picture to attach it)

  the system still works, but I don't know why, we get the error log.

  Thanks for any help you can provide!

  Duyen

  Hello Duyen,

  I think I've narrowed the issue. When remote access VPN using RADIUS authentication we must keep in mind that authentication and authorization are included on the same package.

  Depending on your configuration, the ACS is defined as a server RADIUS (Gserver Protocol radius aaa server) and becomes the VPN Tunnel authenticated and 'authorized' on this server group:

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  As noted above, the RADIUS of request/response includes authentication and authorization on the same package. This seems to be a problem of incorrect configuration that we should not set up the 'permission' in the Tunnel of the group.

  Please remove the authorization under the Tunnel of Group:

  No authorization-server-group Gserver

  Please test the connection again and check the logs of the ACS. At this point there are only sucessful newspaper reported on the side of the ACS.

  Is 'Permission-server-group' LDAP permission when authenticating to a LDAP server so to retrieve the attributes of permission on the server. RAY doesn't have the command as explained above.

  I hope this helps.

  Kind regards.

• Doubt on the RA aaa using ACS 5.3 vpn user

  Hello

  I'm putting in place of the VPN on 8.4 ASA with 2 - VPNGp1 and VPNGp2. VPNGp1 groups users will access 1.2.3.0/24 and VPNGp2 users will have access to 5.6.7.0/24. User authentication will be done using RADIUS 5.3 ACS.

  On ASA, I configured pools VPN groups, ACL of VPN, IP, tunnel of groups and group for each group strategies.

  GBA, I created vpn-user1 and user2-vpn for each of the 2 groups.

  I don't know if some configurations more must be done on ASA and AC... Do I need to add new users - vpn-user1 and user2-vpn - on ASA, under each corresponding group policy, using the command political vpn-group?  Or I need to do something else on the ACS?

  Finally, how can I configure authorization and accounting for VPN users? I have to do this on GBA or ASA?

  Please advice.

  Thank you.

  Hello

  Authentication using radius aims to centralize user accounts and policies so that you will not have to configure these on the SAA. You must create a group of authentication servers that points to your ACS, then you will have to refer to this group of servers to your tunnel-group for user authentication queries will be forwarded to ACS for authentication. For accounting you will create an accounting server group and also assign to your tunnel group configuration.

  The GBA, you will need to create a network client that is ASA, and the shared secret will be the same. You create an element of authorization policy network who have the permission settings, or you can choose allowed access, which allows authentication succeed without any special authorization.

  You can debug the sessoin using crypto vpnclient 255 debugging to view the authentication stream.

  Using SSL vpn (anyconnect) for these sessions?

  Thank you

  Tarik Admani

• How to use ACS 5.2 to create a static ip address user for remote access VPN

  Hi all

  I have the problem. Please help me.

  Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

  I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

  1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

  Step 2select System Administration > Configuration > dictionaries > identity > internal users.

  Step 3click create.

  Static IP attribute by step 4Ajouter.

  5selectionnez users and identity of the stage stores > internal identity stores > users.

  6Click step create.

  Step 7Edit static IP attribute of the user.

  I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

  so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

  Wait for you answer, no question right or not, please answer, thank you.

  There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached

• Dynamic assignment of ACS 5.2 and IP?

  Hi Netpros,

  I just find that version 5.2 of ACS does not justify a dynamic IP using IP pool functionality that was available, since I can remember. All the ideas that this device would be added in what's new?...  I'm working on a migration of 4.1 to 5.2. Currenlty ACS 4.1 is also used for the rental of IP addresses dynamically to remote users. I need to confirm if I really need to migrate this function in other ways. Your help would be much appreciated.

  As far as I know, out of new version 5.3 ACS is still several months away, and it is not confirmed if she would have "IP pools" feature, so I would consider using another device to assign IP addresses in your migration.

• How can I improve accuracy of swimming pool?

  I tried my new Apple Watch series 2 in the pool today.  The pool at the University I work is 15 m wide and I did 30 laps.  I don't flip turn.  After my workout my watch said I did 55 laps in one less than 30 minutes.  After checking the part passing through and taking care that the hand (my watch is on), I touch the side with, I think two things.  First, it considers the key on one side a tower.  Is there a way to change this?  Second, you can improve the accuracy of the Tower, well than doubled in my case, taking care not to touch with the same hand that your watch.  Can it be formed or changed somehow?

  Also, when I started my training you only gave me the choice of the number of calories to burn.  Is there a way to set a number of towers, or do a training session open, instead?

  Hello

  When starting a swim practice, slide sideways on the screen of the goal to choose a different goal, including a workout open-ended.

  Watch OS is designed to improve the accuracy of the estimates for training of swimming over time automatically by analyzing the effectiveness of your race.

  If you want to share your comments with Apple about your problems with the application, you can do so here:

  https://www.Apple.com/feedback/watch.html