Poor performance of editing while rubbing...

Similar Questions

• Poor performance Alienware 13

  Hello, I have recently updated my Asus G55VW to 13 Alienware and he's surprisingly poor performance in some games from my old laptop. As far as I know that I put everything to max performance but it is still low in some areas.

  Old sheet

  Intel i7 @ 2.5 GHz to 3.4 GHz

  NVIDIA geforce 660 m

  8 GB ram

  Alienware 13

  Processor Intel i5 1.7 GHz to 2.7 GHz

  NVIDIA geforce 860 m

  8 GB ram

  So far, Borderlands 2 runs poor while others like Warframe can operate at max settings no problem.  Other games like naruto shippuden ultimate ninja storm 3 full bursting cannot run because it selects only the integrated graphics card and I can not change... Right now, I think that the graphics card integrated into the issue and if there is a way to disable it, which could make things much better. Not to mention that any help to increase performance would be greatly appreciated.

  JLM264

  Alienware 13

  Processor Intel i5 1.7 GHz to 2.7 GHz

  You have a 1.7 GHZ dual core CPU... Borderlands 2 recommends the use of 2.4 GHZ quad core CPU

  Your "old" laptop ASUS who had a 2.3 GHZ quad core CPU meets this requirement more than your new machine

  Warframe works very well, because any CPU dual core is sufficient and that's what you have

• Android apps have poor performance

  I have several applications created for Android and all my folios seem poor performance on android devices. It takes a long time for any article to focus on the text (all sheets are built using PDF), and there is a significant for interactivity in a Folio delay, if it does not crash the app entirely. Has anyone else had problems with Android apps? I have not read a lot of useful information on them.

  All my applications are built for android with the dimensions of 2048 x 1536 to make them readable on the Nexus-10. All applications have been rebuilt with v27 and PDFS.

  I'd appreciate comments you can give.

  Thank you

  One thing that can help with the Active Viewer is to design to a smaller size (1024 x 768, for example), use a PDF object and the viewer intensify folios to fit larger screens. Put scale up to adjustment is supported in our 28 Viewer version of AIR and it makes a big difference in performance while maintaining the reasonable quality of the assets.

  Neil

• Poor performance of Firefox after you apply the latest Microsoft Updates (Win 7 x 64); all solutions?

  Recently, I updated to Firefox 27 and noticed really horrible performance (Manager tasks indicates FF connecting a carrot, frequent "Firefox is not responding messages", even strikes in late development in the URL bar). It's on an Ideapad s205 (AMD E450 APU, Win 7 x 64, 8 GB RAM, SSD) who has always had pretty decent web browsing performance for a low end machine.

  At first, I blamed FF because poor performance coincided with the update to version 27, but now I think that the first cause to be a recent Microsoft Update. The reason is that my wife has a laptop with a same low-end APU (APU C60, hard drive 5400 RPM, 4 GB of RAM, Win 7 x 64), and she was getting much better performance with FF27 until I applied a backlog of some 90 + updates. Now she suffers from the same poor performance I am and she is pretty p * ssed at home.

  Interestingly, I have two WIn 7 x 64 Intel computers to office who have 27 FF and are fully patched, and performance are very good. Maybe this problem is specific to AMD APU.

  Any thoughts? I tried to turn off the backend Azure with some comments in this forum, but makes little or no difference.

  Thank you!

  Success! 32 FF seems to have solved my problems of performance. Thank you!

• HP Mini 110-3530NR extremely poor performance on the Internet

  My HP Mini 110-3530NR Netbook has very poor performance on the Internet.  I use Windows 7 Starter.

  Say hello to new coppens1.  I apologize for the delay in my responses.  I have not received the normal e-mail notifications.

  When I had to go to msconfig earlier in our interactions you make sure that the Synaptics driver load with Windows?  Follow these steps to check.

  1. Click Start, type "msconfig" and press ENTER.
  2. Go to the Services tab and search for "HP Software Framework".  This should load with Windows for a lot of the HP software to work properly.
  3. Then go to the Startup tab and make sure that anything it either by "Synaptic" is loaded with Windows.
  4. Save your changes and exit msconfig.
  5. Then go to your touchpad settings and, even once, make sure that the settings are correct.
  6. Finally, restart the machine and make sure it works properly.

  I totally understand if you want to open a new thread as this covered a few topics!  Just make sure to send me a private message with the link so that I can make sure to help you here.

  I wish you a beautiful day JC!

• SG300 switches have poor performance in layer 3?

  We have several switches SG300 Serices. We use them to route traffic to VLAN remote offices, the Internet connections and wireless access Points.

  In a remote office, we have a SG300-10 facility to route the HQ network and the remote office subnet. The SG300 is connected to the seat through fiber and contains several VLAN Tag. If I speed, tests on the fiber of the entrants Netwotk tag link I get decent performance, 80Mbs. If I switch to a networtk who is not priginating of the central administration and road SG300-10 package, I get poor performance. 15 - 20Mbs.

  I have Fireded until a new FW SG300 - 28 p v1.2.7.76. Added a HQ VLAN 101 and VLAN new, 1025. Mapped some Tagged and not marked for each ports.  Switch has been connected to the network of HQ as untagged VLAN 101.  I put a laptop on a unmarked port VLAN 101. Ran some tests, cam is back with 750-850Mbs. great.  Put the same computer laptop on a Port of 101 tag, set the NETWORK card for tag VLAN 101, same test, same speed, 750-850Mbs.

  I configured then laptop for tag VLAN 1025. Connected to the port 1025 VLAN scored. Done speed tests, the results were 15-20Mbs!

  Then I configured laptop for Untagged VLAN 1025. Connected to unagged port 1025 VLAN. Done speed tests, the results were 15-20Mbs!

  It was only the laptop and connect to the net on the SG300 - 28 p P.C. Why this device's performance is so poor when he needs to route?

  Other switches have v1.0.0.27 FW or FW v1.1.2.0. They have similar speed problems. All configured for layer 3.

  Thank you!

  Scott<>

  How are customer gateways and server configured?

  The default gateway for connecting devices should probably be that of the IVS, they are directly connected to. So if you have a server connecting to a SVI 192.168.1.100 then the gateway server should be 192.168.1.100, not a router upstream. Who can create a loop of road if the return circulation.

  -Tom
  Please mark replied messages useful

• VPN poor Performance - Cisco RV220W and routers WRVS4400N

  Hello

  To one of our customer IPSec VPN is established between Cisco RV 220W and routers of Cisco WRVS4400N.

  Router VPN /ISP details are as below

  Location was	Location B
  Details of the Internet ---------------------- DOWNLOAD: 6 to 10 Mbps Upload: 1 to 2 Mbps Details of router ---------------------- Cisco RV220W Firmware: 1.0.3.5 IKE policy Encryption: 3DES Authentication: MD5 Group: Group 2 Life key: 28800 sec VPN strategy Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled	Details of the Internet ------------------------- DOWNLOAD: 1.35 Mbps Upload: 1.24 Mbps Details of router ---------------------- Cisco WRVS4400N Firmware version: V2.0.1.3 Phase 1 Encryption: 3DES Authentication: MD5 Group: 1024 bits (Group 2) Life key: 28800 sec Phase 2 Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled

  From the day that VPN has been implemented, the performance was poor. Frequent disconnections sessions live to the VPN nodes and very low transfer rate was alarming to users.

  The servers in A location and users to the site B gets authenticated at the server DC level in A location

  Applications of Terminal Server remote as Quickbooks, QQ Evolution, attendance RX serve also the location has by users to the location B

  The login is your time and all applications are extremely slow.

  I tried to copy files between share data between two locations and the results are as follows

  Location A to location B-> 130 Kbps 140 Kbps

  Location location B A-> 150 Kbps to 160 Kbps

  What can be the problem for these poor performance VPN?

  -Change the encryption for the least secure OF THE /MD5 would have a significant impact because it can reduce the overload on the routers?

  -Even if both routers are routers SMB, it has really good VPN flow according to the data sheets. I couldn't find VPN flow mentioned in the WRVS4400N data sheet. One of the sons of CSC, I also noticed the VPN of WRVS4400N flow seemed really low as only about 1.6Mbps. (https://supportforums.cisco.com/thread/2107881)  Whereas RV220W router has VPN 90Mbps flow, according to the datasheet.

  So, what can be the cause of the problem and what can be fixes possible?

  Help, please!

  ANUP sisi

  Beginner to router Cisco VPN, please help

  RVS4000 was designed to work in a small office. It supports 5 VPN tunnels with a maxium of 2 Mbps flow measured in a laboratory environment. It has a processor that has a motor integrated IPS, who would deliver 20 Mbps LAN - WAN throughput when IPS is enabled.

  RV220W has been designed to operate in a slightly larger office with 25 IPsec VPN tunnels. It has a processor that has a built-in cryptographic engine able to deliver throughput 90 Mbps of IPsec. RV220W also supports 5 SSL VPN tunnels that can be used by employees and business partners for remote access.

• Audio not playing does not while rubbing

  Anyone know why the first is not playing audio while rubbing the main timeline? It's really hard to change the rhythm of the music now without being able to hear anything. Playing the timeline as it is works very well with the audio, but not with the washing

  Go to the Premiere Pro > Preferences > Audio and make sure play Audio while scrubbing is checked.

  

  MtD

• Lag while rubbing

  I recently replaced card gfx with the same brand / model of card and since then I've dealt with a lot of delay while rubbing thr chronology. Nothing else on my Mac has changed.

  3.1 mac

  24 GB ram

  1 GB GTX 285

  1 disk of 1 TB storage

  1 System 500 GB

  Thanks in advance

  There is a known issue with Premiere Pro CC 2015 (v9.0 - 9.0.2) on El Capitan, where the read head would have all sorts of questions to scouring. Personally, I had it where to move the playhead in the timeline and playhead monitor program would update only later and delay and be strange.

  It is a problem of incompatibility of OS and has been fixed in the latest version, which came out two days ago. Adobe has not recommended to use El Capitan until the release that just came out.

  See you soon!

• Cannot perform the operation while the host belongs to a Windows domain.

  Hello

  I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;

  Cannot perform the operation while the host belongs to a Windows domain.

  The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.

  Any advice would be appreciated

  Thank you

  M

  FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.

• Poor performance InternetExplorer9

  Hello

  I have my InternetExplorer9 on a clean Windows7 VM thinapped and have Veery poor performance when I run the finished app.
  I tried many things to increase the speed. My normal ie9 starts in 5 seconds, until it's on google.com, my thinapped however ie9
  needs about 10 seconds, even after the restart of the 5th. What I've tried so far is:

  -J' have compressed the ie9.exe when generating

  -J' put 'AutoStartServices = 0' in the Package.ini generating

  -J' put 'NetRelaunch = 0' and 'AutoStartServices = 0' in the Package.ini.

  -J' set the sandbox sand-path %appdata%\microsoft\windows\sendto and the local path (tried both)

  -J' deleted some unnecessary user-specific folders in the project path

  -J' got only InternetExplorer.exe as entry point

  I tried the last few steps of each constellation, but no finished package is better than the others. You have any other suggestions for

  My problem? (I use the Thinapp_4.7.2 by the way)

  Kind regards

  Tobias

  It doesn't matter as long as it is in the right section:

  [Compression]

  CompressionType = None

  [Segregation]

  DirectoryIsolationMode = merged

  [BuildOptions]

  OptimizeFor = mΘmoire

  DisableTransactionRegistry = 1

  I forgot to mention it, but there was a new feature of Internet Explorer 9: hardware acceleration.

  Change IE9 to disable hardware acceleration has helped me get better performance in my VDI environments.

  See:

  http://support.Microsoft.com/kb/2528233

  Go to Internet Options, advanced, check ""use the software instead of GPU rendering rendering "."

  Recover application or use sbmerge to update your project file.

  
  

• disc Flash of poor performance

  Hello
  When I run $cellcli EI list physical disk, some of the Flash drive is showing a poor performance.
  
  
  alprod1st09: FLASH_5_0 1116M08EUW poor performance
  alprod1st09: there is no such thing as FLASH_5_1 1116M08EV9
  alprod1st09: FLASH_5_2 1116M08EVA poor performance
  alprod1st09: FLASH_5_3 1116M08EVC poor performance
  
  is it requires to call oracle for the replacement of flash drive... it is very critical?
  Kind regards
  ANI

  One of your flash cards shows also absent I would suggest contact you oracle for a glance. You are on the last cell server software? There used to be a problem that caused problems with the pci riser cards. It is fixed in the latest software drivers.

• No sound during editing or rub. EPs

  No sound during editing or rub.

  EPs

  With the help of text - audio speech.

  For some reason, the audio track is represented and rereads in the end of the project. But, there is no playback in edit mode, so I can't ' time my text and images...

  You have any advice?

  Thank you

  Greg

  

  Hello

  Can you check the timeline that the audio is not muted, see screenshot for the audio icon (highlighted)?

  Lilybiri

• HP Pavilion Beats SE 15z: poor performance HP Pavilion 15 edition Beats Audio

  Hello, I have a problem. I bought this laptop less than a year ago and he started having some performance issues. For example, the startup is slow, when I go in the folder so that it hangs usually a bit before displaying the contents of the folder, programs to take a few seconds starting and I have very bad performance in games, not even for those requiring like Minecraft, terrariums, CSGO, Unturned etc. I uninstalled all the bloatware but the question is. I thought it might be the system (I upgraded from 8.1 to 10) and I've done several system resets and still the same. I have installed Ubuntu 16.04 now hoping it will be better, but no, it's the same thing. It was a little overheated and stop unexpectedly, so I cleaned it with the can of compressed air, but it did not help that much. I've got the "Please use Smart good AC adapter / CC" message a couple of times, but I don't know what is the issue. (I use the original charger, BTW) Thanks in advance!

  P.S. Sorry if I posted in the wrong section, this is my first time I'm on this forum.

  Hello @AtomicStriker,

  Thanks for the quick response!

  You can try to perform a system recovery using the following document:

  HP computers - performing a recovery of the system (Ubuntu)

  However, based on the information you provided, you can contact the Support of Ubuntu.

  I hope this helps.

  Kind regards!

• Poor performance of the laptop XP

  My friend has an old laptop. She uses it to much except e-mail, navigation of base and Netflix. Even if its an old computer, it seems very slow for me. Here are the specs: Dell INSPIRON1100 Celeron CPU 2.20 GHz. 224 MB of RAM MS Windows XP Home Edition Version 2002 Service Pack 3. A C. NTFS drive. Total area is 27.7 Gb. = 14.8 GB free space. Other statistics: since the Manager task performance (after a start cold with no loaded application) monitor commit Charge Total 150360 limited 556276 pic 284296 network Local area connectivity 100 Mbps (Comcast in connection with cable to the router Comcast) to start cold (completely died), it takes apx. 2 minutes to start until I hear the Windows chime. Once the base system begins, launching applications is very slow. For example, right after you start with nothing else loading it takes apx. 22 seconds to start Firefox, then check out the homepage. This may be because of the speed of the Internet (which is good see above) because the home page is a very small local file on your hard drive. Its a file with no graphics at all, only four links (e-mail, google, page news and Netflix). After Firefox starts when I click Netflix it takes apx. 20 seconds for the home screen to come and be usable. (These times are however from a freshly toed machine) When I click on a movie it takes apx. 30 seconds just for me getting the red Netflix screen which indicates the film is start and apx. 1 minute for the movie to start. It's actually not too bad, but once the computer has been used for a while, it may take much longer. Its also very little reliable. It crashes a LOT and she in turn off the computer at least once every night or she will end up hanging. Sometimes, it crashes even when during the day and must be restarted. Even if we do not get the blue screen of death, we get just the hourglass and his does not. BTW, it uses Firefox, because when I loaded a few patches from Microsoft a year ago Internet Explorer has stopped working. It seemed as if some IE plugin hung looking for some data. I remember the details because it was some time ago and I just loaded Firefox which worked immediately. Its virus protection is out of date, however she sails almost never on the Internet. On the other hand it is not very computer savvy so its possible there is some virus. I've seen the ads for registry cleaners, but they sound like they might be potentially more trouble then help. I'm ready to install a virus protection, what would be the best recommendation for someone who has no eCommerce, ne * and very limited surfing? This could be a virus problem? Or maybe it's that the computer has low RAM and my expectations are unrealistic, because I work on most modern machines with more powerful processors and a lot more than RAM? One last thing, the fan seems to be almost constantly.

  Of course, a lack of ram is definitely a problem. I would like to scan the computer for malware with Malwarebytes and SuperAntispyware. Remove any detected object. Defragment and see if there are improvements.

  Also, great job to give information on the computer. The problems are much easier to solve with sufficient information.