pop up setup screen

Similar Questions

• iTunes, showing all of a sudden the new Setup screen?

  I don't know what happened to my iTunes, but it suddenly seems back to a new Setup screen.

  I haven't used iTunes - but it is set to auto-sync with my iPad.  I have had my iPad attached, while I was with my MBP. Later, I went to iTunes and disconnected from the iPad and - I think - quit iTunes. When I then opened it, that's what I have:

  

  It's always the same version of iTunes (11.4), and my music library is in the same place on my hard drive.  But I can't access my music by clicking on 'music' and all my playlists have disappeared.  I've never used icloud in any way, nor I remember having seen this screen before.

  Can you see what's happened and tell me how to get back to where I was - I can review my music and playlists, and iTunes as before?

  In iTunes, I found as it was before - almost - copying on the set of a backup disk iTunes Music folder.

  But the backup drive is not up to date and so some music I recorded very recently added (name to name the song and not the genre/artist/etc) is missing.  I tried to copy back the music file which is updated (from the origin on the MBP folder), but they aren't there yet.

  Any ideas on: 1) what happened to the "install screen" problem in the first place? and (2) is it possible to get the very recent missing tracks back?

• Acer aspire 10th switch does not start the Bios Setup screen

  I'm trying to start on the bios Setup screen to change the boot sequence to test a rescue disk/windows 10 install usb, but all by pressing f2 during POST it just boots to windows of ideas anyone? Thank you

  power the device turned off, press and hold the power + Volume UP

  After awhile, it will boot to the BIOS.

• When I try to access the Recovery Console, "Welcome to Setup" screen does not appear and it asks me to install on a partition... Help

  My office has the continuous loop reboot of Windows XP SP3 ("UNMOUNTABLE_BOOT_VOLUME" STOP 0x000000ED - 0x8A8EB7B8). When I put my Windows XP Pro installation CD to access the recovery console to make the steps required to solve the problem. The "Welcome to Setup" screen ever comes back to press 'R' to arrive at the RC. Instead a screen comes up that says, "the following list shows the existing partitions and space unpartitioned on this computer." Then, he gives me the ability to press ENTER to install Windows XP, press C to create a partition, or D to delete a partition.

  Why can't I to the Recovery Console to fix the reboot loop?
  Most importantly, I lost some data on my hard drive? If it won't let me even get to the RC?

  I found a solution to my problem and it worked!

  If anyone else has this problem follow these steps:

  Click on this link and follow the instructions to make a CD of Windows XP Recovery Console. http://www.proposedsolution.com/Downloads/Download-Windows-Recovery-Console/

  Then, when you start using the CD, this...

  1. When you see the "Welcome" screen
  2. press on 'R' to use your Recovery Console to repair the installation
  3. Type "chkdsk/r" and press "enter." CHKDSK will analyze and repair your hard disk. Type "Exit" once this process is complete.

  Your computer will restart and should be fixed. at least mine was.

  I hope this helps!

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• ssvagent.exe keeps popping up on screen

  Security warning keeps popping up on screen

  I want to let this program make changes to my computer?

  Since oracle Inc. program is ssvagent.exe

  It is constantly popping up on the screen and every time I check the no box

  Please tell us how can I remove this or to avoid projection

  Thank you

  JO

  The most recent (June 2013) Java update caused this problem happen in my Internet Explorer 9. When I encountered this problem during a previous Java updated earlier this year, I managed to fix it by disabling the Java modules, as others have suggested.

  I just tried the same solution again and it solved the problem again. Here is the solution I used:

  Follow instructions of Tadasha Mithra (see above) in the "method 2" by steps a to c, but instead of stage d - e, I had to do the following instead: "."

  d: in Internet Explorer, go to Tools, select Manage Add-ons. A window should appear listing your modules. In the drop-down "Show" menu, select "all add-ons". Reload the list of modules in the right pane.
  e: scroll down the list until you get to the items listed under «Oracle, America, Inc.» Right click on each of the elements it and select 'Disable'.

  The only way I could solve this problem in my IE9 was by disabling all the modules related to Java (i.e. by assigning everything that was on the "Oracle America, Inc." to "disabled"). But I'm not very teccy so you should be able to solve the problem by turning off only some of them.

  If you are worried about the ability to disable it, you can see these two pages dealing with Java SSV helper doing and whether it is necessary:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/what-is-Java-TM-plug-in-SSV-helper-and-what-does/09c9a6ba-8F17-4ed8-9bde-27baf3c7eb66

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/what-is-the-Java-TM-plug-in-SSV-helper/e4841bb0-CBDF-4202-9249-2feefa64f236

  Hi Trudelle,

  Thanks for joining us again with your answer.

  For the particular problem I suggest you follow these methods and check.

   

  Method 1:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to fix this sector, all available on which data may be lost

   

  Method 2:

  I suggest that you go on the link disable add ons and check. Here is the link for your reference.

  Follow these steps:

  a. click Start, select all programsand right click on Internet Explorer.

  b. Select run as administrator.

  c. click on allow in the box user account dialog

  d. in Internet Explorer, go to Tools, select Manage Add-onsand select Select or Disable Add-ons.

  e. here click SSVHelper class and select disable under settings, click on OK.

  Reference:

  Manage Add-ons in Internet Explorer

  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons#IE=IE-9

   

  How the modules of the browser affect my computer?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-browser-add-ons-affect-my-computer

  It will be useful. For any windows questions do not hesitate to join us.

• How to set the new display root (pop all the screens and screen to push a single root)

  All,

  in my application, the user can move from one screen to the other and back. but as soon as the user has a special screen (such as the password reset screen), should not be able to come back.

  How can I prevent the user to go back? on the iPhone, such a thing is called 'new set root screen' which leads all permeable screens are exploded and that the current screen is on the stack.

  How to proceed on blackberry?

  Thank you

  You can use getActiveScreen to retrieve the screen current and anti-pop who undisplay.

  You can do it in a loop until the last screen is reached.

  not a very good style, but quite possible.

• Wizard initial Setup screen

  Hello

  We have a Mac Pro OS X10.10.1 and password.

  By following the online solution, I deleted the file .applesetupdone:

  RM /var/db/.applesetupdone

  After reboot and enter the information in the form assistant configuration (username and password), the screen continue to return to the initial configuration wizard screen.

  Help, please!

  Also, when I go to single user Mode and redo "rm /var/db/.applesetupdone", it says no file found.

• STOP: 0x000000D1 ndis.sys error during the Windows Xp Setup screen

  I have a computer tailor-made with a motherboard Intel D865GLC with a p4 running at 2.5 Ghz, a western digital 200 GB HARD drive, a drive Liteon DVD - RW, this computer was recently given too me by a friend because I can not afford the newer hardware. The problem I have is when I do a clean install of windows xp, I randomly get a STOP: 0x000000D1 ndis.sys blue screen. I tried to install an upgrade of windows 98 and windows 2000, nor worked. There is no specific time that he likes to fail, but no matter what it fails, it can be just by copying the files from its installation, the network while it please help

  Thanks in advance

  Nate

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software (unless you have Windows 7, that allows to record the .isos natively) - as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• Please HELP HOW CAN I GET RID OF Visual KEY BOARD POPPING on MY SCREEN (office)... Thank you!

  I do not know how will stop the Panel to the screen of the key coming out on the screen of my laptop (office computer)... Please help me with this. Thank you.

  You can prevent the Visual keyboard facilitated access to automatically
  > starts when you load Windows by disabling "use on-screen Keyboard.
  > box on the page "Use the computer without a mouse or keyboard" in the
  > Ease of access Center. (Open the Control Panel, click ease of access, click on)
  > Ease of access Center, and then click on the computer without a mouse or
  (> keyboard.)

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  How do I change the keyboard to the screen on or off in Vista

  See you soon. Mick Murphy - Microsoft partner

• How do I Setup Screen Saver

  Original title: how I do

   How do I?  When I enter the settings for the display, I find the control panel and stuff, but how do, smile, screensaver cute to be the new paper aquarium wallpaper. When I put in the help how can I get the screensaver to be a new screensaver that I have already downloaded and I have peanut files hat are on display that I can't get out. And when I go to the views he just request ok.  Where is the screen saver tabs?

  http://www.vista4beginners.com/how-to-configure-screen-saver

  http://www.myvistathemes.com/articles/how-to-change-the-screensaver-in-Windows-Vista/

  Note: If you have downloaded a Vista screen saver from the internet, then follow the installation instructions provided with the screen saver. You can also save the .scr file in the C:\Windows\System32 directory. Once you have saved the Vista screen saver in this directory, it will be available in the standard list of screensavers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-saver

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows popping up off screen, how can I move them back?

  I use usually 2 monitors.  I am in 1 now and some programs that I use, popups, I think that jump up out of the single screen that I have now.  Is there something I can do for these windows off the screen to go back to a screen I have now?

  Try this;

  Alt + Tab to switch the focus to the hidden window

  RT click on the taskbar and select move

  The cursor should change the move cursor (basically a cross)

  Then use the arrow keys

  http://www.howtogeek.com/HOWTO/Windows/bring-misplaced-off-screen-Windows-back-to-your-desktop-keyboard-trick/

• I get a pop up saying screen... "you want to allow this site to run?" ... CCS. EXE. Microsoft Corporation... How can I remove this pop-up... or is this a virus?

  as I'm reading emails and click on an article...  That is to say: New York TIMES, I get this pop-up... asking to "allow" or "do not allow"... I arrive at the article I "allow"or"do not allow"... This has happened for at least two weeks now... How can I remove this pop-up? It is a virus, I ran several scans to check, nothing found... is this a legitimate warning? the pop-up displays a list of microsoft... CCS. EXE.

  Hi Benny,.

  1. what web browser do you use?

  2. did you of recent changes on the computer?

  CSC.exe is the executable and related to .net framework c# compiler.

  Note: Try the steps only if you are using Internet explorer as your web browser below.

  Method 1: Check if Add-ons on Internet Explore are causing the error. I suggest you try opening Internet Explore mode without modules.

  (a) click the Start button, click all programs , and click Accessories

  (b) click on System Toolsand then click on Internet Explorer (No Add-ons).

  For more information, see the link below.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-browser-add-ons-affect-my-computer

  Method 2: If the previous step fails then I suggest that you reset browser settings Internet explorer to the default, if you use internet explore as a web browser.

  For more information please visit the link below.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  See also: http://support.Microsoft.com/kb/831259  

• Value of the product is not displayed in the list of installation prices and modifying Setup screens

  Hello!

  I wonder why did in the configuration list price and screens set up to change the value of the product is not displayed. What I use is a new clone and just noticed today this scenario. The value of the product used to appear on my old clone. Probably could have been changed?

  Thank you.

  We have recompiled the elements Flexfield system and it worked.

• HP xw6200 workstation - cannot get to BIOS with F10 Setup screen

  HP xw6200 workstation - cannot get to the configuration screen of the BIOS with the question of the language with F10.  Because of a mental lapse, I turned on the SATA RAID Option ROM.   System fails to start on the C drive. It turns out that the system has an Adaptec 1420SA SATA HostRaid map three discs. I see now three readers at the start after I enable readers to show in the Adaptec utility. Two of the disks are configured in RAID 1 Boot on the C: drive.  He could not see the third disc in Windows Explorer, only the C: drive.

  At startup by pressing F10 I have only three options:

  1 Ethernet Boot Agent

  2 RAID Adaptec Configuration utility

  3 Intel RAID for Serial ATA

  My question is "How to get back in the BIOS to achieve the Advanced tab to disable the RAID SATA ROM Option?"

  This article is similar to your problem.  I would try to clear the CMOS memory.  If you open your PC, you should find a rider to move that will define your CMOS to default values.  When you move the jumper, let up for a minute and then bring it back.  If you can't find the jumper then try to remove the CMOS battery for a minute then replace.