Pop Up window which appears when you connect to the computer

Similar Questions

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Pop - up screen to record images does not appear when you connect the camera

  Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
  Guest USB? Download the pictures?

  Hello

  1. Are you referring to the AutoPlay window that appears when you connect a device to the computer?

  What is the number and the model of the camera?

  In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.

  Troubleshoot AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• I use only 20 MB when you connect to the 802. 11A

  Hello

  I test aironet 1130ag with the wlc 2106 in my test environment

  When I connect to the 802. 11 a or g, I can get max speed 20 MB and not 54 MB

  What is worng and what should I check?

  Here is the basic configuration of the 802. 11A

  network 802. 11A... Activated
  11nSupport... Activated
  802. 11A of low band... Activated
  802. 11A mi band... Activated
  802 11A high band... Activated
  802. 11A operational rates
  802. 11 a 6 M rate... Mandatory
  802. 11-9 M rate... Support
  802. 11 a 12 M rate... Mandatory
  802. 11-18 M rate... Support
  802. 11-24 M rate... Mandatory
  802. 11A rate of 36 M... Support
  802. 11A rate 48 M... Support
  802. 11-54 M rate... Mandatory

  Beacon interval... 100
  CF Pollable mandatory... People with disabilities
  CF poll request mandatory... People with disabilities
  CFP Period....................................... 4
  Maximum duration of CFP... 60
  Default channel... 36
  Default Tx power level... 1
  DTPC status... Activated
  Fragmentation threshold... 2346
  Long retry limit... 4
  Lifetime maximum Rx... 512
  Service life of Max Tx MSDU... 512
  Medium limit of occupation... 100
  Pico-cell status... People with disabilities
  State of the Pico - cell - V2... People with disabilities
  RTS threshold... 2347
  Short retry limit... 7
  Threshold of TI-50
  State of the metric traffic flow... People with disabilities
  State of the accelerated application of BW... People with disabilities
  Profile EDCA type... by default-wmm

  Thank you

  When you say that you get only 20 MB do you want to say is that your data rate or throughput of your true?  If this is the true throughput which is right.  Remember that 802.11 is a technology of half duplex.  Half duplex and the management fee a client that connects to 54 Mbps can have a flow in fact up to 22Mbps

• WNR2020 - setting up the Web page that appears when you can access the guest network

  Someone knows how to set the Web page that appears when you access the network of comments? I use the WNR2020 router. Thank you very much.

  It can be done by using a different material.

  Above all, you will be able to find this feature in our product business and it's called the HTTP redirect.

  You can check some Points of access such as WAC720, WAC730.

• Swatches to Pantone which disappears when you use only the percentages of the swatch

  Hi I came across something that might be a bug in Illustrator CS6...

  Here's the thing... I did a drawing or model in the CS6 (colorspace) and have used several Pantone swatches.

  Some Pantone colors, I used only a percentage of the color, for example, the design consists of: 75% of Pantone 485 C, 32% of Pantone 1345 C and 100% Pantone 154 C.

  In the design process, I used several other colors Pantone, which are not used in the final design, but they are still in the tab/list of Swatch.

  For example, when you click on the triangle (top-right) > "Select" is not used all the.., Pantone colors which are used only as percentages (Pantone 485 C & Pantone 1345 C in the example) are chosen as "Unused" ?

  I've been using Ai CS4 prior to this version, and in this version, it wasn't a problem.

  I could you the percentages of Pantone colors without the shade chosen as 'Unused'.

  I don't really want to manual remove every unused nuance by dragging it in the trash.

  It would be such a time waste handling.

  It's really annoying that I work for a printing and design company, and the need to save the Pantone colors that are used in the design, even if they are only a percentage of the Pantone color chart.

  Could someone please explain me why or what the reason is that this is happening...

  I missed something?

  Thank you!

  When you created the hue of the color Pantone you did that made a shade? Or did you just leave it as it was?

  If you don't have whereas they should stay, but if you just changed the tint but did not save it as a sample then the pms color is no longer used because it is a specific hue. At least that's how it seems to work.

  I agree with you that you always use the PMS color and have to stay without the need for nuance, even if it a shade of each color is a good idea.

  I would say it is a bug and should be reported as such. Cn do you here:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• A circle that appears when you click with the eyedropper?

  When you click with the eyedropper in CS5, what is the big circle form that appears on the screen around him?

  Thank you.

  Hello!

  This blog explains what is the circle for: http://blogs.adobe.com/jnack/2010/05/color_picking_improvements_in_photoshop_cs.html

  See also this video: choose colors precisely with the eyedropper

  To disable, uncheck show color ring in the options bar. But try it, learn how to use it: http://blogs.adobe.com/jkost/2010/05/jumping_the_hud.html and you will see it become a major asset in your Photoshop arsenal.

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.

• Appears when logging on to the computer.

  Everytime I try to sign my computer I get this error: error loadng c: / documents & settings/owner/local settings/application data / apple computer/apple/ymkqqtz.dll the specified module would not be found RUNDLL - I don't have an apple computer and have no idea why this appears - I click on the box that says ok and she disappears - it doesn't seem to affect my computer's performance , it's just irritating it's there everytime I try to sign my computer thru AOL - Can someone help?

  Hello

  1. What is the version of the operating system that you are using?

  2. when exactly you will get this error message? While that connect to the computer or connect to AOL?

  3. have you made changes on the computer before this problem?

  If you use Windows 7 or Vista operating system, follow the steps below:

  Step 1: Check in SafeMode with network.

   

   

  You can also check if the problem persists in safe mode with network and check.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem persists even then please complete step 2.

  Step 2: Perform the clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• stopped script (still another script) when you turn on the computer

  Almost everytime I start the computer, I get the error message. Script stopped, do you want to retry the script or abandonment of it.
  The scripts are always different. And until it is cleared (sometimes a few of them) the functions offline is very slow and I can't go on the internet.

  Hi HennieK,

  1. did you of recent changes on the computer?

  2. what browser you use on the computer?

  3. what happens when you try the Internet?

  Disable script debugging in internet explore and check if it helps.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Windows Server 2012 R2 Remote Desktop Server - user session crashes when you connect to the wide

  From time to time, a user session hangs during registration out of the Windows 2012 RDS.

  This has happened for two different users. Whenever the session hangs with the message "signature" and the user can not log such as they appear with the same message by.

  I connected to the RDS as administrator, checked the Task Manager and found that an office application always work, such as Excel.

  When I complete the process of the office application and disconnect the user through the Task Manager, the user can log in again.

  I reinstalled the desktop software and still happens from time to time...

  Any suggestions?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When you connect to the internet error code 678 appears. What can I do to fix this?

  I get the error code 678 when trying to connect to the internet.

  With the help of a new modem D-Link DSL provided for me by my new extreme DSL service provider.

  Have Windows XP Professional installed on my machine.

  I downloaded the updated drivers for my network n-force Nvidia card.

  When I try to connect to the internet, I receive error 678 and cannot connect code.

  A run scans regularly for any virus or malware, with none detected using Norton 360.
  In addition to performing other troubleshooting code error 678.
  How can I fix this error 678?
    
  Hello
  You can check this link:
  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/892889