PORT 80 ON EA6350

Similar Questions

• EA6350 connectivity issues continue

  As in my last post http://community.linksys.com/t5/Wireless-Routers/Linksys-ea6350-issues/td-p/976162 I tried to fill the EA6350 routers to make an AP, but it still does not work even though I spend to fill entry mode the 192.168.x.64 of static IP addresses and. x.63 and connect the cable to the WAN port.

  I have an another WAP which is operational but it is a netgear R8000 and it works perfectly well and is connected like these other WAP are, any ideas of what can be the problem? any help is appreciated.

  I understand the problem, it was my default router that was connected via a modem, he was conducting his last step, so I replaced it and everything works perfectly fine. Thanks for replying tho

• Linksys ea6350 questions

  So for starters, I have 2 switches, one for computers and the other for IP phones, they're plugged into a wired router, while the router is connected to the modem. My client has a switch mini under his office that connects to the network printer and his computer to the switch of the computer, plugged into a wall outlet that went to the telephone switch that makes a loop from one switch to another, the Microswitch who messed up his Copier IP addresses and IP phone and made 2 ea6350 wireless routers go down Router 1 is connected via the PC port on an IP phone, so it can get an internet connection (lets call this RouterD router), it worked before this, but now I have problems. The other router is connected through another mini switch that goes to the switch of the computer in the wiring closet, so it is not connected through an IP phone like this, but it does not work either since plugged the Microswitch in the switch of IP phone (lets call this RouterU router). I tried to install RouterD with an IP address that differs by the main router (192.168.0.1) DEFECT in the wiring closet (192.168.0.2) and he had point to the default gateway 192.168.0.1 and a 24 regular but it won't always connect to the internet, the settings previously were even if the phone is able to call and receive calls. I have not messed with RouterU yet because I was trying to trouble RouterD. The previous configuration I don't mess with, I plugged it in and it worked fine. I would appreciate would like to thank all the assistance.

  I have reset both routers EA would then follow it and create one at a time:

  http://www.Northshore-it.com/Tips/how-tos/cascade_linksys/#LAN_to_LAN

  The routers value EA one IP address static to 192.168. #.63 and the other at 192.168. #. 64. to reconnect to the LAN to LAN after reconfigureing.

  Is there a bridge mode defining routers on environmental assessment? Connectivity-online Internet settings => IPv4-online Bridge Mode

  If so, you can assign both to fill the mode then you can connect the WAN port on each EA router to the router main host. Then the linksyssmartwifi could be used.

• SMB file sharing problem when connecting EA6350 to a larger network.

  Hi all

  I tried to set up a server of media for my colleagues, but have had problems for the last 3 days.  I searched all possible solutions on various forums and have managed to operate, only to discover the next day that he stopped.  I was able to get it working again, but the same problem occurred and stop randomly with additional problems.

  I will now do my best to explain the installation program. Windows 10.

  I have a line entering my room, I don't know where will the line nor can I trace it (I guess to a switch where everyone connects to).  When I connect it dirrectly on my laptop I have an internet connection.

  My ethernet card is set to automatically get IP & DNS.

  I'm affected: IP: 192.168.68.231 DOOR: 192.168.68.254 subnet: 255.255.255.128 DNS: 8.8.8.8

  I bought a Linksys EA6350 set up sharing of media files with a hard drive plugged into the USB port on the router.

  I plug in the bathroom line to the WAN port on the router and a cable from my laptop to the Router 1 LAN port and still have web connectivity.  The problem is that no one can access my shared SMB drive since it is on IP:192.168.1.1 and all the other computers are on IP:192.168.68. ***

  My router IPv4 connection report is: Auto DHCP, subnet: 255.255.255.128 DOOR: 192.168.68.254, IP:192.168.68.242, DNS:8.8.8.8

  I can't to ping other computers in the range * 192.168.68 my laptop and routers ping function.  The firewall of the router is turned off to allow them to connect. But, still no access for someone else on the shared drive because it is IP:192.168.1.1

  The way I could make it work until it stopped working randomly the day after was by pluging the line room in LAN 2 port, LAN 1 port is connected to the laptop.  The value of my computer laptop ethernet static with these values: IP: 192.168.68.231 DOOR: 192.168.68.254 subnet: 255.255.255.128 DNS: 8.8.8.8 and changed the configuration in the router for what is in the pictures.

  It worked.  I had an internet connection, and people were able to copy movies on the shared drive.  Then it just stops the next day.  The router was no longer able to ping any, but my laptop couldn't yet.  The list of devices on my router tab showed all was connected on the subnet 192.168.68 * but that's all she could do.  I have everything reset, went through the same procedures and then a day later it worked just (if I remember correctly, I've changed the "type of internet connection" on the automatic router to "DHCP").  Only to stop again but this time cut of my Internet connection of laptops until I put the ethernet adapter to obtain automatically IP address and DNS.

  I ran out of ideas runs take the router out of the equation and the pluging directly on my laptop HD and share it from there.

  Any assistance that can be provided would be greatly appreciated, thank you.

  You give the router specified a wrong IP address for the subnet mask of 255.255.255.128.

  Valid IP addresses for this subnet is 192.168.68.2 - 192.168.68.127.

• Issue of router EA6350

  I know how to do this on my router which goes to the big pile of junk in the sky,

  But I don't know where or how doing it on the EA6350 AC1200 + Linksys router I bought.

  Here's what to do. "

  EchoLink requires that your router or firewall to allow incoming and outgoing UDP ports 5198 and 5199, and outbound TCP port 5200.  If you use a home network router, you also need to configure the router for 'before' ports UDP 5198 and 5199 to the computer on which EchoLink is running.

  This can be summed up as:

  Allow the UDP destination ports 5198-5199 between Internet and PC in both directions
  Allow TCP (source port requested, the destination port 5200) PC to Internet

  An instruction step by step would be great.

  Thank you

  Bob

  You can make forwarding ports 5198-5199 port beach.

  1. go to the page Linksys WiFi Smart of the EA6300, and then click Security.

  2. under Security, click on apps and games tab. Then, triggering Port Range subtab.

  3. type any name of the Application (EchoLink). Put 5198 - 5199 times triggered and transferred ports.

  4. check enable and click Save.

  For 5200 port, you can transfer using simple Port Forwarding.

  1. under Security, click on apps and games tab. So, simple Port Forwarding subtab.

  2. enter any name (EchoLink) application. Put on (source port) and an external Port 5200 on Internal Port.

  3. set the TCP protocol and the IP address of the PC.

  4. check enable and click Save.

  Hope that helps.

• EA6350 verizon usb modem and legacy

  Hi all! My daughter just bought an EA6350.

  Our internet service is provided by Verizon on a very old usb modm, usb270 made by qualcom. This modem relies on the software on my computer to work. This modem is also shared on my computer via the properties of the adapter.

  In order to share this connection with the rest of the House. I got a belkin wireless unit who quit work hooked up to the ethernet port on my computer. It worked very well to provide the rest of the House with wireless internet access.

  I was also able to access our printer other computers on our home network with my computer and wireless.

  Now for the problem I don't know how to overcome. With the EA6350 connected to my computer via ethernet cable, everyone still has Wi - Fi as before. The difference now is that I can no longer see our wireless printer or other computers on the home network to my computer. I would like to at least see the printer.

  I tried to connect the modem usb directly to the router, but it does not work. I just can't get too much anyway.

  Here's a simple layout to help:

  modem usb270---> my computer---> EA6350---> rest of House

  Thanks in advance!

  Connection Internet of EA6350 bridged mode configuration should solve this problem.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Port SSL messages to jabber/gtalk does not stick

  Hi-

  It is not purely associated with Sierra, as happening on El Cap.  The port default to Google talk is 5223, which is blocked in my company.  I had previously configured messages to use 443, which is not blocked (and supports gtalk).  But at some point during the last couple months, gtalk stopped linking to work.  When I looked at it, she returned to 5223.  When I try to set it to 443 (disable the account, change the port, re - enable the account) everything looks good, but at the time when I try to connect, it turns to 5223.  I tried to delete the account completely re - create, both as a right has Jabber (port 443 from the beginning of setting) or as a gmail e-mail account and then change the port later.  Nothing does.

  Thinking perhaps it was corrupted prefs, I deleted all the * prefs to iChat and everything that seemed related to google or jabber.  No change in behavior.

  Anyone seen this before?  Help to solve if possible of love.

  Thank you!

  Hello

  Currently I use port 5222 and without SSL and my account settings Google is for applications that are less secure.

  I can't use 5223 or even443 with SSL on.

  

  21:01 Tuesday; October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone headphone output port IS not working do not

  helmet SE iPhone does not work. Bought new Apple earbuds and determined this is the port the atria. Phone is only a few months old. Help, please?

  This morning, I installed the last 6update iPhone: iOS10.0.2

  My headphone stopped working this afternoon (after a few hours of use).

  I couldn't understand anything to make them work again. Returned and the phone and the headset are working again.

  Update Nevermind the last version of iTunes Music *. Each update is a version longer than music/iTunes

• Lightning iPhone 6s port has stopped working

  I connected my phone to load as usual and he did nothing. Plugged into my Mac and iTunes doesn't. I tried three different lightning cables who all worked but nothing now. I tried to plug it into the wall charger usual USB and two Macs.

  In my view, that the port of lightning on my iPhone is damaged or dirty. I also tried cleaning electronic contacts spray cleaner on the connector of the cable and it out of the port by inserting several times. Also tried out blow out with compressed air in case it was just dust. Nothing has worked.

  Any help?  Should I bring?

  Thank you

  It seems to me you've done as much as you can and it would be good to have Apple to assess.

• air port utility

  Hello!

  I want to change the name of the base station and the password for it, and I use air port express 802.11n (2nd generation).

  The hard reset, soft reset in express air fitting is long so don't want to use it.

  Is it possible (using as book Mac - latest Mac OS Sierra air.

  Thank you!

  Hi there, tygb!

  Thank you for joining the communities Support from Apple! It's a big question about changing the name and the password for your base station. Read this article here with the steps to use 6.x AirPort Utility: change your base station name and the password. This will not give you to use the utility to make the changes.

  Have a great day!

• iPhone port 7

  This is my photo check ok iphone port 7 please are the pins ok but not folded

  Is something happening that is causing you to believe there is a problem with your port?

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?