Issue of router EA6350

Similar Questions

• Server 2008 Network issues: supposed routing problem

  Hey,.

  I'm quite new to ESXi and virtualization, but after going to a network of customers of the otherday and the discovery of a few quirks, I downloaded ESXi5 and I am experiancing the same weird questions here.

  Essentially the issue I found was that I could perform nslookup against a name short end but ping or attempt to connect to a share on the short name did not work.

  Ping or connect to a share on FQDN works as expected as the fact using one IP address.

  I installed a new copy of ESXi5 and then treated a virtual computer running server 2008 here in the House.

  Upon installation, the machine could not ping itself or any network with a name short but device could run nslookups.

  New ping and connect to shares works very well on IP and domain FULL name

  Any help would be greatly appreciated, and I apologize if this has been answered elsewhere.

  Dave

  EDIT: I will add that I installed a copy of Server 2008 on a standard in the House and short machine work exactly as expected.

  
  Edit 2: I looked into this more and my routing table shows 0.0.0.0 network - prefix 0 - Gateway 192.168.0.1.

  This network has no switches, concentrators, simple as it is just a test home network. How can I solve this problem of routing?

  0x4C wrote:

  Here is a copy of the ping the server attempts to ping itself via shortname:

  

  Dave

  It's the magic screenshot

  The ping command is interpreting your hostname, 0x3c, as a hexadecimal number and deciding that you want to ping 0.0.0.60. Is not a valid remote, so ping generates an unknown error.

  It is strongly recommended that a Windows Server name starts with a letter, and you have found one of the strange bugs about why.

• issue of router WRT120N

  I went to get online this morning and I see that my router has all the lights at the same time except the wireless.  I have nothing plugged on 2 ports so why the lights would be on?  I tried to power down, but it won't.  My router is fried?  The lights flicker out of

  Yes, I tried everything and he's dead.  Went and got an E1500 and no problem.

• Can not set up a new Smart Wireless of Linksys account with my new router EA6500.

  It started with an EA6350 router that I bought last month. It was working fine and my acount of smart wifi linksys worked very well and I've been using all services without any problem. I found a better offer on EA6500 and since it was less than 30 days, I went back my old router EA6350 and bought EA6500 and guess what each unique feature works very well except for the fact that this isn't to let me create new account Wifi Linksys niether afford card from my old account with the new router. Every time I reset the router and start a fresh install and get to the point where it ask me to create the account, it is for me very stupid mistake saying 'your router is not connected to the internet' which is not true because I can browse the internet explore even without any problem.

  I took help thru time camps technical cat, also called the linksys support but no one is able to resolve the problem so that. Rather they make me to reset my router again once I get the same message and we are not good with the solution. If what someone has the slightest idea or idea or some thing to try please let me know. Thank you.

  Problem is solved.

  I updated the firmware by accessing the router locally and manually downloaded the new cabinet where the Linksys.support.com file and then installed. After that, all the errors I was getting were gone.

  Solution simple but not to think at any time.

  I hope that it might help others who have done the same kind of problem.

  Thank you!

• PORT 80 ON EA6350

  For the life of me I can't router EA6350 to forward port 80 to my DVR or anything like that. I tried everything under the tab 'security', without success.

  If I disable the firewall on IPV4 routers I can get the "'http://canyouseeme.org ' open the tool port to see my network." However, leaving the hardware firewall turned off and then set up "simple port forwarding" or "port range forwarding" to open port 80 causes the port check tool to fail?

  I turn on the IPV4 firewall and then it still does not work. The only time I can get the tool to work port is with the firewall turned off and nothing entered IPV4 for 'simple port forwarding' or "port range forwarding."

  I have disabled the software firewall Windows 7 to see if it is interefering and it isn't. Any help would be greatly appreciated. I had a D-link router before and it worked very well with my DVR.

  Enjoy.

• EA6350 forces 192.168.1.1 as DSN - fails

  I just bought this router EA6350 and have been messing about with it for a week now. The problem is the DNS parameter passed to DHCP clients is 192.168.1.1. This is the new IP address of the router and not a DNS server.

  On my LAN, I have 2 DNS servers. First box is Linux 192.168.1.135, second box's 2008 offering VICTORIES to 192.168.1.200. I entered these static DNS entries with 1 entrance to my ISP.

  The results are the No. DNS resolutions. The only solution I found is to enter my DNS to each computer. This is not acceptable because when I leave the House, I have to remove the manually entered DNS to connect to another network.

  I found the question on this forum but I have found no solution other then manually enter a DNS. What more should I should I do with this router? Ideas?

  I have heard that with the WRT1900AC router and Linksys had their reasons for this. Although I don't know if this has the same effect with your current router, but:

  It is a feature of the router. All DNS queries are handled by the router. The router uses the static DNS servers who entered the router UI but will only pass the IP address of the router to the DHCP client.

  This allows a correct handling of the www.linksyssmartwifi.com URL to point to the router of the UI rather than the Linksys Wifi Smart cloud.

  Make sure the firmware on your router is up-to-date.

• Time Capsule speed

  Download speed of Time Capsule is 14 Mbps only 5 feet away when the provider gives 34 Mbps.  Upload is the same as the vendor to 5.5 Mbps.  The time capsule is not working correctly?  My old Airpot Extreme worked better than this

  Who is your provider?

  This modem do you have? Brand and model please.

  We need to know how the TC is the installer... is this in bridge or main router?

  Are there mistakes like double NAT?

  My old Airpot Extreme worked better than this

  Ironically with some old customers that will always be the case.

  To be taken seriously... you need to measure a lot of things.

  1. turn off wireless on a computer and a plug in the TC LAN ethernet port and do a speed test.

  This will tell us if the issue is routing/wan or wireless.

  2. If the wireless to test one... is only WAN or also local LAN... so to copy a file to a computer on the ethernet to a wireless computer and visa versa... how fast do you have? It must be half speed connection or close to him... that shows your computer's link speed?

  3. run the diagnostics apple Wireless provides...

  What errors or changes suggests?

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

  Keep a detailed log of your results... so that you know which test conditions, you used for each test.

• HP Officejet 6500 a Plus - E710n, loses the wireless connection

  • Mac OS X 10.7.3
  • installed with a usb cable
  • When the printer is on, it is available for a few seconds (I am able to print/scan only once), then it becomes unavailable
  • even if the printer is not available for the Mac, it is connected to my wireless network (check the connection on the printer display)

  Hi Marco,.

  I'm not afraid,

  Scanning from the Mac on the network can be performed using Hello only, Webscan is the only possible workaround.

  In order to obtain functionaity analysis complete by the software, you need to sort the issue multicast router.

  Kind regards

  Shlomi

• WRT 1900AC is more manageable via web browser?

  I suspect that it is an artifact of the recent improvement in security in Internet EXPLORER and Firefox, or Norton Internet Security, but I have not thought about it yet.  Here are the symptoms:

  (1) I have a stable network environment that normally, I do not change.

  (2) I use my ISP Comcast and they provide Norton Internet Security, who usually complains of a 'certificate' problem when I try to access my router through a browser web (I MSIE 11 x 64, Firefox and Chrome...

  (3) I can connect on the router locally using the password I assigned sometimes...

  (4) no matter what I try, the page load speed Test is more completely.  I use an Android version of the same software through the router, but I want the stats directly from the connection between the cable Modem and the router, not a wireless approximantion the base performance numbers.

  Has there been an upgrade of the BIOS to my router which fit not automatic?  I registered everything and log in to Linksys support without problems., but now none of my browsers will be same can let me connect you to the web page of Linksys 192.168.1.1./...the way which they used to.

  Of course, this could be a problem of trainsient with speed Test web site, and/or the Linksys web pages, but... Is there any help out there?

  Using MSIE 11 (x 64) through:

  https://192.168.1.1/UI/1.0.99.164461/dynamic/home.html

  Today, I managed to activate the speed Test, and I've identified the problem.  My background update later normal windows or that of Norton Internet Security apparently reset the security settings of the browser about the redirection.  Little planning screens of the router management web server redirects the screen of UI browser secured to a site of Ookla, and the browser blocked the redirect.

  Fortunately, I do not update the BIOS software router from Linksys and the subsequent automatic restart in December remotely had anything to do with the problem.  He appeared a week ago.  The problem is solved!

  Once I tell my browser to allow all content, not just to content security speed test interface works.  Thank you all!

  As the issue of router maintenance is, if I pass the BIOS of Open-Source for this router, as planned, I will certainly follow the Protocol described for restorations will be my main defense against bugs introduced in the process of open source.  I've been a user of Linksys for over 10 years now and have never experienced a problem with update of the post.  I recognize the risk of losing the connection to the internet via remote maintenance protocol, but I'm sure that if this happens, I'll be able to recover.  There is nothing 'mission critical' on internet services to my personal residence.

• Nested ESXI 5.1 in Workstation 5.5 9/10 - constantly losing the connection

  Hi all

  I am trying to build my using ESXI VMware Lab nested in VMware workstation. My hardware configuration is:

  CPU-Xeon E5 - 1620 v3, 7 GHz

  Motherboard: Asus P9X79

  First HARD - SSD 128 GB David M5S drive

  Second HDD - Segate 3.5 "2 TB ST2000DM001

  RAM-2x8GB Kingston HyperX 1600 MHz DDR3 Non - ECC CL10

  I installed Windows 7 x 64 SP1 and Windows 8.1x64. On both systems is the same. Workstation works fine for 10-15 minutes. After this date, all (vSphere, SSH for hosted OS) connections are closed. I installed a Linux CentOS 6.5, 5.1 ESXI and ESXI 5.5. Linux CentOS 6.5 are inside of ESXI. All connections are bridged.

  Then when I reconnect by vSphere or SSH connection, everything works well for the next 10 to 15 minutes.

  Below you can see the Logs of Windows (sorry, but I have the Polish version of Windows) and VMware Workstation logs (in this version of the example 9.0.3 1410761) of c:\ProgramData\VMware\hostd\hostd-12.log.

  I enclose also a few screenshots.

  I would like more information, please ask me.

  Any idea what can cause this problem?

  Quote from the journal of VMware workstation (time lost connections):

  2014 02-20 T 10: 03:50.632 + 01:00 [01632 verbose "Default"] has expired between HTTP requests. : Read timeout after about 1205000ms. closing flow TCPStreamWin32 (socket = local TCP(fd=1736) = [: 1]: 8307, peer = [: 1]: 49345)

  2014 02-20 T 10: 03:50.632 + 01:00 [03028 error 'SoapAdapter.HTTPService'] cannot read the request; flow: TCPStreamWin32(not-connected), error: class Vmacore::TimeoutException (operation timed out)

  2014 02-20 T 10: 08:50.387 + 01:00 [02576 verbose "Proxy Req 00006'] new client proxy SSL (TCPStreamWin32 (socket = = 127.0.0.1:443, even local TCP(fd=1752) = 127.0.0.1:49364))))

  2014 02-20 T 10: 08:50.389 + 01:00 [00800 info "Default"] wire attached

  2014 02-20 T 10: 08:50.391 + 01:00 [02576 verbose 'PropertyProvider'] RecordOp REMAP: info, haTask - vim.ServiceInstance.currentTime - 1679830147

  2014 02-20 T 10: 08:50.391 + 01:00 [02576 verbose 'PropertyProvider'] RecordOp REMAP: info, haTask - vim.ServiceInstance.currentTime - 1679830147

  2014 02-20 T 10: 09:20.389 + 01:00 [02528 info "Default"] wire attached

  2014 02-20 T 10: 09:20.389 + 01:00 [01748 info "Default"] wire attached

  2014 02-20 T 10: 10:27.389 + 01:00 [info 04944 "Default"] detached thread

  2014 02-20 T 10: 10:57.388 + 01:00 [02528 info "Default"] detached thread

  2014 02-20 T 10: 13:50.389 + 01:00 [00800 info "Default"] detached thread

  2014 02-20 T 10: 28:50.699 + 01:00 [02576 verbose "Default"] has expired between HTTP requests. : Read timeout after about 1205000ms. closing flow TCPStreamWin32 (socket = local TCP(fd=1820) = [: 1]: 8307, peer = [: 1]: 49365)

  2014 02-20 T 10: 28:50.699 + 01:00 [01632 error 'SoapAdapter.HTTPService'] cannot read the request; flow: TCPStreamWin32(not-connected), error: class Vmacore::TimeoutException (operation timed out)

  2014 02-20 T 10: 32:10.380 + 01:00 [info 03812 "Default"] wire attached

  2014 02-20 T 10: 33:17.381 + 01:00 [01748 info "Default"] detached thread

  2014 02-20 T 10: 33:50.411 + 01:00 [02576 verbose "Proxy Req 00007'] new client proxy SSL (TCPStreamWin32 (socket = = 127.0.0.1:443, even local TCP(fd=928) = 127.0.0.1:49405))))

  2014 02-20 T 10: 33:50.414 + 01:00 [info 01412 "Default"] wire attached

  2014 02-20 T 10: 33:50.414 + 01:00 [02576 verbose 'PropertyProvider'] RecordOp REMAP: info, haTask - vim.ServiceInstance.currentTime - 1679830148

  2014 02-20 T 10: 33:50.416 + 01:00 [02576 verbose 'PropertyProvider'] RecordOp REMAP: info, haTask - vim.ServiceInstance.currentTime - 1679830148

  Windows Journal:

  -

  System

  - Provider of [ Nom] Application error

  - Event ID 1000 [ Qualification]

  Level

  2

  Task 100

  Keywords 0 x 80000000000000

  - TimeCreated [ SystemTime] 2014 02-19 T 21: 55:10.000000000Z

  EventRecordID

  2510

  Channel Application

  Computer COMPUTER

  			Security
  -		EventData

  VMware - vmrc.exe

  9.0.0.28537

  520fabbf

  Msvcr90.dll

  9.0.30729.6161

  4dace5b9

  40000015

  0005beae

  1370

  01cf2db7c9ad3847

  C:\Program Files (x 86) Remote Console Plug-ins 5.5\Internet Explorer\vmware \Common Files\VMware\VMware - vmrc.exe

  C:\Windows\WinSxS\x86_microsoft. VC90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll

  7ffed6bb-99B0-11E3-90f5-005056C00008

  Hello

  I found what caused this problem. In my lab environment, I have the WRT54G-TM with DD - WRT router onboard. It has been configured in Client Bridge mode. He has some problem with mains supply. I disconnected the router from my computer and plugged directly on the wireless NIC card. He helped with the interruption of network problems, but there were a lot of issues with routing etc. I bought new router TP-Link TL-WR740n v4.27 and connect as a client mode on my primary wireless router. After that everything works fine.

  Once again thank you for trying to help.

  I hope this helps someone simillar questions.

  Thank you!

• i6400: how Intel WirelessPRO without DHCP?

  Hello

  Recently, I have switsched my home lan DHCP Server Manual. But the built in Client wireless in my inspiron 6400 (Intel-WirelesspPRO abg) seems to have problems with a manual ip address. I have properly configuered in windows settings manual ip address.

  After about 1 hour of connection to the issue of router becoms an i can no longer access wan (I always strangely access lan-devices)

  As soon as I turn the router DHCP and windows fo the customer settings wireless on 'automatic' my connection is back...

  .. .but I want to be able to run a lan configured manually without DHCP!

  ... any ideas?

  Thank you...

  ter111

  
  

• EA6350 connectivity issues continue

  As in my last post http://community.linksys.com/t5/Wireless-Routers/Linksys-ea6350-issues/td-p/976162 I tried to fill the EA6350 routers to make an AP, but it still does not work even though I spend to fill entry mode the 192.168.x.64 of static IP addresses and. x.63 and connect the cable to the WAN port.

  I have an another WAP which is operational but it is a netgear R8000 and it works perfectly well and is connected like these other WAP are, any ideas of what can be the problem? any help is appreciated.

  I understand the problem, it was my default router that was connected via a modem, he was conducting his last step, so I replaced it and everything works perfectly fine. Thanks for replying tho

• EA6350 not accept the password "admin" little matter I have reset the router device.

  Hello

  I just brought a new EA6350 router and it does not accept the 'admin' to connect to the router. I have reset the router and can ping 192.168.1.1. Also able to enter in the login screen. But the default password: admin has not been the success you want to connect.

  Help, please

  Hello Sir,

  I've been using google chrome to run the installation program. It failed and when I use IE and followed the same steps, it has worked well.
  You have so much

• Routing issue of Cisco VPN Client ASA

  Hi, I use a Barracuda NG for firewalls and I would use a Cisco ASA 5505 for VPN Client connections. But I have the problem that I can't get a connection to the VPN PC connected to the internal network. But I can reach the VPN connected PC from the inside. Here is a diagram of my network:

  cisco_asa_prob.jpg

  

  Here the IP Configuration and the routing of the Barracuda firewall table:

  screen_shot_2014-08 - 12_at_16.01.42.png

  

  I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.

  The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.

  Here is the config Cisco ASA:

   : Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable

  Can someone please help me solve this problem?

  When I tried to solve this I didn't choose which interface the Packet Tracer?

  The interface inside or DMZ interface?  Inside, he says it will not work with the dmz but the error did not help me

  Anyone here knows why it does not work?

  screen_shot_2014-08 - 12_at_16.34.57.png

  

  screen_shot_2014-08 - 12_at_16.33.06.png

  

  Hello

  Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.

  entrance to the road that is static to achieve 10.10.10.11 as its display is correct...

  Route by tunnel watch also with 255 administrative distance.  I've never used that in my scenarios... lets see...

  Concerning

  Knockaert

• R6400 router Internet intermittent issues

  Hi all

  Got Netgear R6400 and for help from behind the ISP supplied Modem/Router, even though I turned off the Wifi of the provided ISP router functionality. When you are connected normally awhile, I'm not able to access INternet Wifi was shown to be connected.

  Also not able to ping to the IP address of the ISP router provided at the show, once she came back after reboot while other times it solve just after a few minutes. Router watch new Firmware is available, but I don't know if he can really solve the problem or aggravate the situation. While I connected the NAS (QNAP) with her and she is very stable and better speed thn my old DSL68U from ASUS.

  The ISP modem /router must be placed in bridge mode OR change the r6400 for AP Mode

  Page 128

  http://www.downloads.NETGEAR.com/files/GDC/R6400/R6400_UM_07Aug2015.PDF