EA6350 verizon usb modem and legacy

Similar Questions

• I CAN SEND/RECEIVE A FAX USING MY CANON PRINTER/FAX/COPIER USB AND MY MODEM INTERNAL VOICE/FAX WITH MY VERIZON USB MODEM FROM THE INTERNET?

  I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.

  Original title: I DO NOT HAVE A POSER LINE, I CAN SEND and RECEIVE a FAX by USING MY USB CANON PRINTER/FAX/COPIER AND MY INTERNAL VOICE/FAX MODEM WITH MY VERIZON USB MODEM ACCESS to the INTERNET?

  The game, July 1, 2010 21:03:19 + 0000, CAPTBARRY wrote:

  I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  You have an internal fax/voice modem, but if it is not connected to
  a land line, cannot you send/receive faxes like this.

  Your only choice is to not make use of your machine gun, but to use a web site
  service to send faxes for you.

  Ken Blake

• problem running the usb modem

  IM under win 7 ultimate on my laptop. with each resetting of my knees, once shows error SiS 7001 PCI to USB Open Host Controller
  deactivation of my usb modem and once without error... I tried the troubleshooter but with no. use... and I tried to update the software of this unit, but it is the latest version of the software... could someone help me with this problem... Thank you very much

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > looking for the latest Windows 7 drivers > download/install the.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• the d-link DWM-156 3g usb modem driver

  Hi, after upgrading to windows 8 Windows 7 my modem d-link dwm-156 usb not detected. How can it be resolved?

  Hi rahman hamed,.

  Thanks for posting in the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  1. you receive an error message?
  2 have you tried another USB port USB modem?

  Try the steps to solve the problem.

  Method 1:
  Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:
  a. press Windows + C keys on your keyboard to show the charms.
  b. type troubleshooting, and then click solving problems under settings.
  c. now, type Hardware Troubleshooter in the search option.
  d. click convenience hardware store to run the troubleshooter.

  Method 2:
  You can uninstall and re-installation of software

  a. uninstall the USB Modem in control panel software.
  b. Insert the USB Modem and install the software when it prompts.
  c. restart the computer and check with the question.

  Method 3:

  You can update the latest drivers for usb modem for Windows 8 on the manufacturer's Web site and check.
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  If no driver Windows 8 then, you try to install the driver in compatibility mode.

  (a) right click on the driver configuration file, and then select Properties.

  b) click on the Compatibility tab, check the following box to run this program in compatibility mode for and select Windows 7

  (c) in the drop-down list. then try to install the device driver using run as administrator.

  Response with more information to help you. Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Have verizon usb 720 modem for my laptop. 1603 error codes and Error code 2738 appear when you try to install the update for the device.

  Have verizon usb 720 modem for my computer laptop vista Home Premium 32. Here downloaded update but when get novatel driver the device install failed code 1603. Then he checks the previous versions and the installation States. After 1 min error 2738 VBSricpt moment of action custom execution failed. A verizon tech says that it is a windows problem. Another says that it is a usb device bad 720. Verizon says the rssi-rtt and the rssi on there network evdo should be about - 80 and my poster-98 device manager and-88 most of the time. With 3 bars of signal, they say it's the 720.mkv that's a bad camera or laptop? Can not stream video and Media Player even freezes. Have updates and it started 2 months ago. Any help don't want not to block 2 years for a new modem, if no change. Or would it be the laptop? Thanks for any info.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  Or here:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  They will help you with your question in the Forums above for Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Trying to connect using a 4 G Verizon Wireless USB Modem

  I'm tying to get an internet connection through my company of Verizon Wireless, with a 4 G USB Modem.  The latest information I got from them were to download a newer version of the VZ Access Manager from the internet.  When I did all downloaded correctly except the pilot does not, and then I learned that he was a "problem of Microsoft in all areas" and that I had to download a Pack from XP Smart.  However I get my updates on a regular basis and have done everything in my power to get my Vista Home Basic 32 Bit updated computer and keep says he is up to date and that the driver works correctly.  I have connected wih this unit for a day and 1/2 then it stopped working and I have not been able to operate since.  I logged until I downloaded the new version of VZ Access Manager.  I've uninstalled and reinstalled the software several times and have changed my USB port as well and even luck now, any ideas.  The new version has been for Compuers using Vista 32/64 and Windows 7.

  Hello

  Do you have an error message when you try to connect to Verizon Wireless USB Modem?

  Send the request in the Verizon wireless Support for assistance.
  http://support.verizonwireless.com/CLC/

  Hope this information helps.

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?

• Satellite L40 USB, wireless, modem, and its failure

  I'm trying to solve a Toshiba Satellite L40 and ask yourself how I diagnose a hardware failure.
  Problem is that the free wireless and sound had stopped working and it would freeze whenever a USB device has been inserted.

  Decided to do the new install of XP, but it failed each time to 34 minutes.
  I've suspected of hardware failure as well as a USB was curved touching another PIN to cause a short circuit.
  Bent it back but install still failed at 34 minutes.

  Remove the wireless card, always not so I removed the modem and it went through without error.
  Installation of two causes fall in XP install.
  Have installed all the latest drivers and even flashed the BIOS, however, still have the following problems:
  Insertion of a USB device causes yet portable no freeze, no sound and wireless / modem not picked up by windows during the installation after the installation.

  Shows Device Manager:
  1 exclamation point on "Microsoft UAA bus driver for High Def Audio"
  2 "unknown device" in the USB controllers but not exclamation mark - peripheral USB not connected.

  It is possible that the 'short' USB has damaged a controller on the motherboard is causing the failure of these devices?

  Any help would be appreciated

  > 1. Exclamation point on "Microsoft UAA bus driver for High Def Audio"
  Win Xp requires the Sp2 and Sp3.
  Patches are part of service packs and are necessary for its work.

  Here's an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=101337

  > 2. "Unknown device" in USB controllers but no exclamation point - USB devices not plugged in.
  The internal webcam is connected to the USB controller then perhaps, you add the webcam software.
  Otherwise this could have something to do with the USB port defective

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• When I connect my usb modem to my pc and it is held automatically loading my pc restarts

  When I connect my usb modem to my pc and it is held automatically loading my pc restarts

  Hello

  Please check the USB modem to a different USB port or another system.

  If it works fine in another port or another system, it may be the problem with USB port.
  If you face the same problem. then the problem is with a USB modem,
  Please check with the manufacturer of your USB modem.
  Kind regards
  Chauvet J.

• Has anyone seen a fax USB modem that works with Windows Fax and Scan?

  So far I'm 0 for 2.  PC Fax modems seem to be a lost art.  A few months ago, I tried a USB fax modem and tested the receipt of the fax.  The modem answers the phone, the fax sender starts the transmission and... nothing happens.  Eventually, the sender times out with an error.   Same computer, same Windows Fax and Scan software, with an old modem connected to a serial port, all works well.  Modem manufacturer was not able to help.

  And now the same problem with another PC, the modem is different, different situation.  This time I don't have an easy fallback to a serial port.

  And that leads to my question - no matter that matter where in fact seen a fax-modem USB in the field send and receive faxes using Windows Fax and Scan on Windows 7, and if yes, what was the make and model?

  Thank you

  -Greg Scott

  Hello Greg,.

  Thanks for the quick response.

  You can view the reviews of the product in the manufacturer's Web site and see if that helps.

  Also for the Windows Fax and Scan, when your PC or computer would be equipped with a fax modem (or connected to a fax server), it can send and receive documents such as a standalone device. Windows Fax and Scan even includes a handy tool for the design of custom cover pages.

  Also refer to:

  Fax and scan Windows

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Y410 Ubuntu 10.4 and Huwaei E153 hsdpa usb modem

  Hello

  IM using lenovo y410 with ubuntu 10.04. I bought the new Huwaei E153 hsdpa usb modem. But it shows as usb storage device. I can't install to use it as modem hsdpa. Please ask me... How to install this modem.

  Thank you

  http://UbuntuForums.org/showthread.php?t=715810

  http://UbuntuForums.org/search.php?SearchId=77668988

• HP Total Care disabling USB modem

  HP Elite 8000.  He had for 1 week.  Everything works very well.  Including my Verizon USM150 usb modem.  After a few days, HP Total Care will then appear a running system health check.  Modem disconnects Internet.  When I try and connect, vzam gives msg of error on the modem again.  Uninstall, reinstall the modem.  Everything works well for a few days.  New computer, I download a lot of things to set up the new computer.  No problems.

  So today, I go into HP Total Care to report a problem with my warranty start date.  From HP TC loading, internet connection drops.  I try to reconnect and get the same error as before vzam msg.

  Once, I didn't know what happened.  Twice, I believe that HP TC is originally a kind of problem with this modem.

  Thanks for your help

  Simple.

  1. download the latest version of HIGH for your computer

  2. uninstall the old version of HIGH

  3. install the new downloaded version

  Presto, problem solved

• USB modem is not working properly

  Hello

  internet usb modem 3 is installed, but when I connect to the internet, it will work for 3 to 4 minutes then stop working saying problem loading page, when I close the page I am always connected has a full signal.
  If someone could give me some advice or help on how to sort it would be great, thank you very much.

  Hello

  It is not easy to discuss with you. Why you didn t write what model phone you have and which USB modem are you using?

  Please post more information.

• Re: I am unable to install a new usb modem

  I'm trying to uninstall a usb modem inorder to install a new. I'm unable to uninstall and get the following error when you try to uninstall:

  SetupDLL/SetupDLL.cpp (469)
  Broadband Mobile PAPP: 3
  PVENDOR:3 Mobile (#ID_STRING_COMPANY_LINK #)
  PGUID:3EAAC5FD - E 209-4856-8 C 49-D4EA40F85032
  $10.50.0.125

  @Windows service Pack 2 (6002) IE.8.0.6001.18975.

  I'm unable to install a new modem usb I get an error message saying I don't have permission

  I would be grateful for any help

  Hello

  Don t know what modem you have and need this modem but I recommend checking that my modem manufacturer supplied installation instructions.
  You should also visit the modem manufacturer for more information about the new software, installation or updates

  PS; usually, you can uninstall the software installed in the Panel-> Add & Remove software.

  Otherwise, I recommend tool called CCleaner. It cleans the operating system, the registry and it s useful to remove the software from the HARD drive.