port TCP 443 for anyconnect

Similar Questions

• LaserJet Pro M402n: Cannot print on LaserJet Pro M402n on port TCP/IP for Windows 10

  I'll put up a new workstation Windows 10. It is brand new with all updates applied. The printer gives me fits. I tried to install as myself (with administrator privileges), 'run as administrator' and logged in as a local administrator and I got the same results each time. I used 'install' and 'non-installateur' version of the most recent drivers.

  The printer is a HP LaserJet Pro M402n. I'm installing a Standard TCP/IP Port. I can ping the printer. I can get on the printers web interface. Likewise, the installation program detects the printer and gives no error. But when the installation is complete, and I try to print a test page, nothing happens.

  The same printer is configured the same on my old Windows 7 workstation which is still on my desktop and connected by the same switch and on the same subnet as the new work center. It prints very well.

  Any ideas to get this to work?

  Got, it works. It had to be that something gimped upward in the initial installation of Windows. I've reconfigured on the PC and was able to get the printer to work first time.

• HTTPS (port 443) for router RVS4000

  Hi all

  I have two servers - one running MS exchange and other running a crm platform and both must be access via https. On the router - I've linked https to an address ip and router refuses to accept the same port 443 to another ip address binding. I'd appreciate any help I can get to solve this.

  The organization chart is attached.

  

  Hello!

  Unfortunately, it is not possible to have same port simultaneously transmitted to multiple internal IP addresses - imagine even if this setting would be possible, how the router will know who to ask what internal server to transmit from the port where the request has been received the same?

  However, with RVS4000 you can perform the following operations - use TCP 443 for Server1 and say that TCP 4443 for server2.

  Assume that your servers have the following IP address allocation:

  Server1 - 192.168.8.100

  Server2 - 192.168.8.101

  In RVS4000, go to Firewall-> simple Port Forwarding

  Set it up as on the screenshot:

  

  After that you can access from the Internet both servers using the following URL:

  Server1 - https://wan_ip_address

  Server2 - https://wan_ip_address:4443

  I hope this will solve your problem!

  Best regards

  Ivan Bondar

  Cisco Small Business Support

• How to close TCP 443 and 902?  (WS 9.0.1 on the Linux host)

  When it is hosted on Linux (Ubuntu 12.04), VMware Workstation 9.0.1 listens on ports TCP 443 and 902 on all network (0.0.0.0) interfaces.  This happens as soon as the host operating system is finished booting, even if you do not launch the VMware GUI or run the virtual computer guests.

  This creates a potential attack surface, on a machine that can be used on hostile networks and normally has no open TCP ports listening.

  These two headphones can safely be stopped?

  Or can reconfigure us these headphones link only to the loopback address (127.0.0.1)?

  Of course, we could solve this problem by activating the Linux Firewall on the host computer, but this seems to be using a sledgehammer to crack a nut!  There is no reason for VMware Workstation business link to nothing else than the loopback address, so it would be easier if there was a change for VMware startup scripts to solve the problem at the source.

  Thanks for the pointers!

  -Martin.

  VMware-authdlau 1419 root 8u IPv4 12139 0 t 0 TCP *: 902 (LISTEN)

  spend-worker 1732 root 27u IPv4 8818 0 t 0 TCP *: https (LISTEN)

  spend-worker 1732 root 32u IPv4 8822 0 t 0 TCP localhost:8307 (LISTEN)

  I did not, but if you do not use the shared virtual machine so I see no harm to comment on the entries above.  It wouldn't break anything permanently and you can certainly easily Uncomment if/when necessary.

• Which TCP port is used for VMWare Infrastructure Client?

  Hello, my ESXi server sits on the private network, and I'm trying to PAT so that I can access the external network using VMWare Infrastructure Client Server. Does anyone know what port is VMWare Infrastructure Client listen? Thank you.

  Priscilla

  Do the external network for VMware NAT

  I guess you mean that your server is located in the internal network and Client is on the outside.

  If the customer does not have to "listen" for connections it opens TCP ports - HI 1024-65535 to servers as follows.

  Servers (including GSX) TCP ports: 8222, 8333, 902

  If you have ESX (i) then TCP ports: 80, 443, 902

  T:OMI

  Psalm Points, please

• Error "" unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  "Unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  Original title: how to install the printing software to solve the error message?

  Hello

  Follow the troubleshooting steps in the following article and make sure that port 139 is unlocked:

  Windows Firewall may block some programs to communicate on the Internet after you install Windows XP Service Pack 2

  See also:

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  Note: Information provided in the article applies to Windows XP with Service Pack 3 (SP3) installed.

  If you use a third party firewall, I recommend you contact the software vendor for assistance.

• How can I download Internet Protocol Version 6 (TCP/IPv6) for windows 7

  I am not really satisfied with windows 7 home Priemium 64-bit, I don't know and I don't know how I can download Internet Protocol Version 6 (TCP/IPv6) for windows 7, besides that IE 9, cannot download and run Adobe Flash 10.6, Microsoft and Windows begins to find quick solutions or we also have the right in our country to take Microsoft and justice exactly the same If someone used a not registered copy.

  Concerning

  Angry Sam

  Follow these steps:

  Click Start, type: network connections.

  Press enter on your keyboard

  Right click on your network connection and then click Properties.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Select the check box next to the Internet Protocol Version 6 (TCP/IPv6).

  ----

  Please note that if you use a 64 bit version of Windows 7, you must use the 32-bit version of Internet Explorer that is included with the operating system. Adobe Flash Player is not commercially supported by the 64-bit version of Internet Explorer still under Windows 7 currently.

  Click Start > all programs > click Internet Explorer (one who is not listed as 64-bit)

  Adobe Flash Player not is not supported for playback in a 64-bit browser
  http://kb2.Adobe.com/CPS/000/6b3af6c9.html

  I have Windows 7 64 bit and you need to use Internet Explorer 32-bit

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/babaa5f8-FF06-4EA2-aef6-a9416d65f981

• Close applications that use ports 80, 443, 8000, 8002 and 8004

  Operating system: Windows 7 Professional

  I set up a test server that is demanding that I closed all applications that use ports 80, 443, 8000, 8002 and 8004, because these are required by the Test Server. I don't know how to do this. Any help would be greatly appreciated.

  Best,

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Serial Port is configured for a virtual machine...

  Dear team,

  I found the serial port is configured on one of the virtual machine, which follows is the blink of an eye the same.

  

  Just want, serial port is required for the devices on which?

  Usually, you see the serial port after a P2V and not detached from the VM.

  Why is it necessary?  Nowadays it probably isn't, but there are days where we still used modems on (among other things) serial ports.  Introducing a serial port to the virtual machine, you can go through the device that was attached to the serial port of the server host directly on the virtual computer.

  Today it is not really useful and you can probably just close the virtual machine and remove it.

  Matt

  http://www.thelowercasew.com

• Several ports to listen for SSH on Catalyst switches

  Hello community,

  On Cisco routers, you can set up multiple SSH ports (instead of the default tcp 22) in combination with rotary groups. Then attach these rotating groups of specific VTY lines. It works very well.

  But it seems on Cisco switches, you cannot set different ports of SSH. The order Router(config) #ip ssh port portnum Rotary group is not available. You can use the rotating on the VTY lines, but it does for Telnet connections.

  Did someone knows if it is possible to use rotating groups on switches with SSH? What I'm trying to achieve is, I want to use multiple lists of AAA method and define these specific VTY lines slot. In this way, I am able to designate specific users, connecting from specific IP on a dedicated VTY line addresses, with a personalized list of AAA method.

  Any help is very appreciated!

  Kind regards

  Dion Dohmen

  Hello

  I am currently using 12.2 (58) SE2 on the 3560.

  Software Cisco IOS, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2 (58) SE2, RELEASE SOFTWARE (fc1)

  I lowered my IOS to check if she is still supported for the 3560 on 12.2 (55) SE1 and is not.

  XXX availability is 1 minute
  System to regain the power ROM
  System restarted at 14:38:50 GMT Tuesday, July 29, 2014
  System image file is "flash:/c3560-ipservicesk9-mz.122-55.SE1.bin".

  XXX (config) #ip ssh?
  new authentication attempts to specify number of authentication retries
  DSCP DSCP IP value for SSH traffic
  Configure logging for SSH logging
  priority of the value of IP precedence for SSH traffic
  source-interface interface to specify to address SSH source
  connections
  timeout specify SSH timeout
  Protocol version to specify supported version

  XXX (config) #ip ssh

  I then upgraded to 12.2 (55) SE9 and there is still not supported.

  XXX availability is 1 minute
  System to regain the power ROM
  System restarted at 14:47:49 GMT Tuesday, July 29, 2014
  System image file is "flash:/c3560-ipservicesk9-mz.122-55.SE9.bin".

  XXX (config) #ip ssh?
  new authentication attempts to specify number of authentication retries
  DSCP DSCP IP value for SSH traffic
  Configure logging for SSH logging
  priority of the value of IP precedence for SSH traffic
  source-interface interface to specify to address SSH source
  connections
  timeout specify SSH timeout
  Protocol version to specify supported version

  XXX (config) #ip ssh

  I would recommend that you upgrade, but I unfortunately don't see any point.

  Thank you

  Nehmaan

• Cisco series C - Open Ports TCP 4043 & 4044

  Anyone can respond to what these ports do on C-Series codecs?

  They are generally used for the nearby identity resolution protocol and Protocol location tracking and known to be used by malicious software. Are they used for these protocols, can they be closed without loss of functionality. I have a client who has many systems placed on public networks and they wonder if this can be / should be done

  I looked in the paper without finding the answer:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_IP_Port_Usage_for_Firewall_Traversal_Deployment_Guide_X7-2.PDF

  Any ideas?

  MW

  How are Mattias Hei, you?

  The firewall vcs guide here helps you.

  If I see just the tcp ports 4043 and 4044 are used for business communication (cisco contact 8) & upgrades.

  If no malware :-)

  You can be sure that you can close it from external networks. An intouch would most likely be

  plugged into the secondary port or the LAN in all cases.

  I do it vice versa, all close and open just need ssh and http (s) of networks including access management

  and allow only necessary media ports and signage from the outside.

  You will find that the media ports used TC5.1 ports in the Administrator's guide

  Value space:
  
      Dynamic: The system will allocate which ports to use when opening a TCP connection. The reason for doing this is to avoid using the same ports for subsequent calls, as some firewalls consider this as a sign of attack. When Dynamic is selected, the H.323 ports used are from 11000 to 20999. Once 20999 is reached they restart again at 11000. For RTP and RTCP media data, the system is using UDP ports in the range 2326 to 2487. Each media channel
  
      is using two adjacent ports, ie 2330 and 2331 for RTP and RTCP respectively. The ports are automatically selected by the system within the given range. Firewall administrators should not try to deduce which ports are used when, as the allocation schema within the mentioned range may change without any further notice.
  
      Static: When set to Static the ports are given within a static predefined range [5555-6555].
  
      

• Ports and Destination for VMware View Client

  Hi all

  I'm looking for a quick bit of help if possible please...

  Environment: VMware View 4.5

  Question / Info needed:

  Two companies having a bond of trust between data transfer etc. and resources share. We need access to a site through their firewall in the bond of trust to connect to the VMware View VDI Office.  Customers using VMware View Client.

  The question is, if we get the site to enable port 443 to our broker connection I assume this will not be enough?  It must be possible to:

  443 to connection broker

  32111 (redirect USB) to?

  9427 (multimedia redirection) to?

  4172 (PCoIP) to?

  3389 (RDP if used) to?

  This may all sound a bit novicy but I need to be 100% before you go test.

  Thanks in advance.

  So using the brokers of the connection in direct mode without any security server.   I think that it would look like this.

  443 to connection broker

  32111 VDI Desktop

  9427 multimedia redirection) to?

  4172 VDI Desktop

  3389 VDI Desktop

• Multi-port USB adapter for the MacBook USB - C Port?

  Hello

  I'm in pain, trying to find a USB adapter multi-port for my MacBook 2016, which only has a single port USB - C which is also like a power port.

  I already done is connect the WD My Passport drive external HARD to the MacBook via an adapter HooToo, that to see any HARD drive mounted in OS X.

  OS X makes a sound when it is connected, but apparently the adapter provides insufficient power for the HARD drive needs to be loaded.

  I got Belkin USB multi-port here:

  http://www.Apple.com/us/search/USB-ports?SEL=accessories & src = SERP

  But it is not certain if one of them provides enough power, so I would try rather than a person has used successfully with a MacBook and an external HARD drive,

  If not, opt for a multi-port adapter USB brand Apple.

  Please let me know about your experience or an Apple adapter.

  Thanks in advance

  My Apple 3 port works as advertised. The USB port has a perfect compatibility with the old and readers USB 3, my adapter Ethernet USB Apple and Trendnet USB adapter that I use in series. This includes the perfect function with a 10 VM Windows via VMware Fusion.

  A non - Apple C to an adapter that I bought works fine too. I don't see the brand on this subject but he chose via Amazon ratings. There were some with higher ratings, so that's how I made the choice.

• HP 3005pr USB 3.0 Port replica: software for USB 3.0 Port Replicator

  Hello!

  CAN´t find the software for 3005pr 3.0 HP Port Replicator Port HP support.

  Hello

  If the device has win 10 OS:

  Please find the driver below:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387722 & swItemId = ob_165439_1 & swEnvOid = 4192

  Check the drivers for the device that you are trying to connect:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5387722 & swLangOid = 8 & swEnvOid = 4192

  I hope it helps

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!

• Portege R500 - USB ports no longer for 35 to 60 seconds after standby

  When my R500 (running Vista Business) wakes in sleep mode, Vista is ready to be used within 7 seconds approximately. It would be great, except that the USB ports and the function Bluetooth wake for another 25 to 50 seconds.

  I use a USB or Bluetooth mouse and I find that this long delay start spoiling the otherwise excellent user experience.

  Has anyone noticed the same problem, or did someone knows a solution?

  You use a USB or Bluetooth mouse?

  Try updating the chipset drivers. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, an update of the BIOS could also solve the problem. Try it!

  You have installed the laptop with the Toshiba recovery disc or disc of Microsoft?