Lenovo 3000 N 500 sound card and Modem do not work in Windows XP

Similar Questions

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• C55-A-1N1-Sound Card/micro satellite does not work Windows 10

  Hello

  Since the execution of the upgrade to Windows 10, my sound card or the microphone is recognized, so my system is completely silent. According to the information on this site, this model should benefit from the launch day (today) - where can I get drivers for my laptop? I can't use it without the sound.

  My computer is the Satellite C55-A-1N1

  Thank you

  Maybe this thread could be useful:
  http://forums.Toshiba.com/T5/Windows...UE/TD-p/644836

• Satellite A200-24: after XP sound installation and BT do not work

  Hello

  I have Toshiba A200-24 PSAE3E has

  He came with pre-installed Windows Vista

  I have Windows XP; I formatted the laptop and installed Windows XP Pro SP2

  The problem is that it does not recognize

  Sound and Bluetooth

  I have already downloaded all the drivers for Windows XP from Toshiba Web site and all other drivers work correctly except these 2 drivers.

  What do you think of the problem?
  Y at - he one thing missing (previously ask), I have not installed or should I use the new driver?

  Hope you can help me

  Much appreciated

  AZ

  Hello

  I m wondering if you are looking for in this forum for similar topics.
  I don t think so.

  However. Here's a bit of instruction.

  First step:
  Update the BIOS-> you must have Windows XP BIOS version if you want United Nations of XP on this laptop Vista

  Second step:
  Install the XP KB888111 and KB835221 patches first. Restart the computer and then install audio driver in Device Manager.

  For more information, see this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  Last step:
  The BT driver installation driver BT lie on the European driver Toshiba page or here on the Toshiba BT portal page!
  http://APS2.toshiba-tro.de/Bluetooth/

  Good bye

• I ran a diagnostic on my dell xps and he said that my network 9 cards and 11 will not work because of windows

  I went to the Device Manager to see if something was not working and the 9 and 11 adapters will not load not because of something that invovles windows, I didn't understand and I wanted to know if these cards need to work. Also my Intel graphics driver kernel slows things should uninstall.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

• Satego x 200 - 21u - remote and HDMI does not work on Windows 7

  Hey

  I have a problem with win7 and the remote that was shipped with my laptop when I bought it.

  I installed all the drivers for the toshiba for win7 home page. I also installed winvista, as the webcam driver - and the touchpad drivers.

  The only two things, works does not are the distance and the HDMI output - sound.

  my remote does not work with win7. If I connect my laptop to my dish tv via the HDMI cable I just see the image but no sound.
  I also changed the settings in the soundoptions in win7 default to Digitalaudio (HDMI), but it does not in any case...

  can someone tell me that I need to install these two or do I have to do the drivers, to make my remote and the HDMI output work?

  Thank you very much

  Hi mate,

  It of really strange to say because this laptop is a little older and therefore there is no official support for Windows 7, I think...

  Do you have yellow exclamation marks in Device Manager at the present time?
  For HDMI, I think that chipset, display and its driver must be installed. Maybe you can get one on the Intel page directly.

  Also, make sure that the latest version of the BIOS is installed on your laptop.

• Windows 7 - USB keyboard and mouse do not work once Windows starts

  The following happens occasionally:

  The keyboard works perfectly in the BIOS, the post OFFICE and when the Windows 7/64 Ultimate starts (I can tell the [Numlock] led shines). But when you see the Windows login screen, both, USB keyboard, USB mouse and stop working.

  I can say this from the [Numlock] LEDS go off and, mouse and keyboard, does not.

  There is no discernible specific deadline. Even wait minutes does not get the mouse or the keyboard back from work. In this case, the only way to get both mouse and keyboard, back from work is to reset the machine.

  I noticed this strange behavior with several keyboards, mice and different motherboards. So, it doesn't seem to be a problem related to a particular device.

  Independent since I also noticed the following:

  • I am currently using a card mother GIGABYTE Z68XP-UD3-iSSD. If I activate XDR (caching system with the small SSD disk) then Windows 7 starts up very quickly but keyboard and mouse get disabled for about 5 seconds when the login screen appears.
    .
  • During the installation of Windows, the keyboard rarely has not activate during the POST at all.

  I noticed that several people share the same problem. Is this an inherent problem USB HID? Or is there a bug in Windows that should be fixed?

  Hello

  This might be a question of power, where Windows is shutting off the power to your USB ports. Try this:

  Open the Device Manager
  Click on the tree "Universal Serial Bus".
  For each "USB root hub" do the following-
  Right-click on 'USB hub root'
  Select Properties
  Click the power management tab
  Make sure that the box "Allow the computer to turn this device to save power" is NOT checked.

  Try restarting now. If all goes well, that will take care of the issue.

• Spectrum 13D-3000: Sound LED (F11 key) does not work on Windows 10 1607

  Hello!

  After the upgrade to Windows 10 1607, I have a problem with the sound led (F11 key).

  It is now always red even if I turn on the sound (by pressing fn + f11 key) or by turning on the sound in the Windows menu.

  Before updating the LED becomes white when I turn on the sound. IDT Reinstaling driver did not help. What can you recommend to solve this problem?

  Thank you!

  Mykyta salvation,

  Thank you for your answer!

  The issue started after a recent update of Windows 10? If Yes, then I suggest a System Restore to before that point and see if the problem is resolved. Then, you can block the particular Windows 10 update does not happen. How to temporarily prevent a reinstallation of Windows 10 driver update.

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that this post helps!

• Touch and slide do not work on Windows 8.

  Original title: swype
   
  Hello
  I noticed that neithyer or touchpal swype works on my Samsung Smart PC Pro. Forums of two producers referred to in this new block of version of windows 8 support for 3rd party input methods. Is it possible to enable user-level anyway? I'd be more than happy to use them.
  Windows 7 Acer Iconia W500 had swype id it's a real shame to see that missing tabs.

  @robert aldwinckle: thanks, it runs as an administrator actually resolved the problem for TouchPal. more interesting still it detects only entry of the finger, not of stylus input. Works like a charm now.  I also did a hard reset of my tablet that has removed a lot of Samsung bloatware and maybe that helped also.

  @basith m: thanks, that's a reason which has been given by the producers of Swype. I certainly hope that they can develop their software for win 8 in the future, so I appreciate advance this feedback. the greatest compatibility always brings security risks, but these products can dramatically improve productivity, it is certainly recommended.

  BTW, I like to win 8. You must learn it and customize it to your needs, but once you do, it's perfect!

  best regards,
  Maciej

• How to get AC 97 Front Panel Audio and Microphone ports to work with Windows 8

  I have a m7277c HP Media Center that uses the motherboard Asus P5LP-(Lithium-UL8E) and has an Audio Jack and Microphone AC 97 spec ports on the front panel. I tried to install the Codec AC 97 drivers for Windows 7 and they do not work for Windows 8. The 'High Definition Audio Codec"Windows 8 drivers only work for the Ports on the rear panel, not the Ports on the front panel.

  How can I get AC 97 Front Panel Audio and Microphone ports to work with Windows 8?

  Hello

  Your model has not been tested for the use of Windows 8.

  For this reason, HP cannot provide instructions to upgrade or Windows 8 pilots.

  Therefore, it will be very difficult to provide a solution.

  Thank you

• Help and support does not work.

  Original title:

  win xp my help and support does not work

  Windows Help and support will not work

  Hello

  1. what exactly happens when you try to open help and support? You receive an error message?
  2. what service pack is installed in the computer?
  3 did you changes to the computer before the show?
  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc.

  (b) double click on Help and Support

  (c) to set the startup type on automatic.

  (d) to Start the Service.

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Let us know if it helps!

• I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Radeon hd5450

  I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Hi Edrey Davila,

  1. what operating system is installed on the computer?
  2. are you sound the computer?

  If you connect your computer to the TV using a HDMI cable, try the steps from the following link:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

• I installed a new sound card and it now says pilot active but not turned on, when you look at the system properties, it is there, but there is no sound at all.

  I installed a new sound card, but it will not play sounds.

  When I look at the properties under system it says driver active but not lit.

  If I try and download the latest driver it says that you have the most updated version.

  When you have a look at the sound properties it shows nothing.

  Hello

  · What is the number and the model of the computer?

  · What is the exact message you read?

  · What service pack is installed on the computer?

  Run this utility from the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

• After a reformat, it says I have no sound card and I've done it before? What should I do?

  After a reformat, it says I have no sound card and I've done it before? What should I do? Gateway Windows XP sp 1

  It seems that you have not installed the driver for the sound card.

  If you use a restore disk from gateway it should be there, if you are using a full Windows XP disk then gateway should have provided additional disks with all the necessary drivers.
  Normally, I would like to on the manufacturer's Web site to download the drivers, unfortunately with the gateway no longer in the company that will be difficult.
  If you can identify the manufacturer of the sound card installed gateway you could go to their website and see if they have a driver there.
  HTH
  Neil
  www.nwarwick.co.UK