Portege M400: Windows Update problem

Similar Questions

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Windows Update problem - 0 * 80070005

  * Original title: windows update problem

  I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

  First of all

  KB3138612 would be the last for a manual installation

  The first would actually KB3145739

  Homepage for all versions,

  https://TechNet.Microsoft.com/library/security/MS16-039

  After that you manually install you KB3153199

  I would also like to before doing this,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

• Windows Update problems 0x8024a005

  problems of updating Windows 7 every time I try to update I get error 0x8024a005 next

  OT:

  Windows Update problems

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• Portege A200 - Windows Update

  Just got the unit and before going any further after the basic installation, wanted to updated windows updates.

  But it simply crashes.

  Nortan uninstalled, just in case but not luck. Can browse the web ok with no problems.

  Even activated the automatic updates hoping it would work, but NO!

  The recovery disc reinstalled the operating system, but it's the same thing.

  Any help would be appreciated.

  Thank you.

  Hello

  First of all, you must restore the system with the recovery and after this installation CD, you can make updates. Automatic updates must be checked and as far as I know all Windows updates works automatically in the background.
  If the system is clean and that the firewall is disabled, I can t believe that it of impossible to make updates.

  Good bye

• Portege M400 - Windows XP cannot find the hard drive

  Hello

  Ive got a Portege M400 who im looking to get a new one, I never had the Tablet XP CD so im trying to install using an XP Pro disk, but whenever I get no hard drive can be detected and I tried another disc of publishing house also.

  Ive looked for SCSI / SATA drivers but can only find RAID drivers which are not good for me.

  I hope someone can help me

  Thank you

  Hi wacksonjackson,

  Why these RAID drivers are not good for you? Windows XP requires RAID drivers if your laptop is RAID controller and there is no other choice to install XP from a normal Windows XP disc. Then download the RAID drivers on the official website of Toshiba. Either you create a new installation with the RAID drivers disc using nLite freeware tool or you copy the drivers on an external USB FDD and load them during the installation of XP.

  Also check similar topics here in the forum. You will find hundreds of similar topics on SATA and RAID drivers.

  Check this box!

• Portege M400 - CPU cooling problem

  Last year, when I had used my Portege M400 for 2 years, he started the deadlock occasionally. Sometimes [I couldn't even start it | http://www.youtube.com/watch?v=RjNa8-c2Aro]. With cut and try the method I found the problem. The Spring wire which clasps the CPU radiator, it was with not enough force:
  http://Zorko.ru/assets/files/531/531/170720102581.jpg
  http://Zorko.ru/assets/files/534/534/170720102589.jpg

  The problem was solvable by Berry to the claws spring begins to apply more force hugging the radiator of CPU:
  http://Zorko.ru/assets/files/535/535/170720102591.jpg

  Apply a new layer of thermal grease has been useful as well:
  http://Zorko.ru/assets/files/533/533/170720102585.jpg

  However, the solution works for only a few weeks. And then (especially if it's hot outside) the story begins again.

  Any suggestions how to solve the problem once and for all? Thank you.

  Hi Greendrake,

  It s really great that you are interested in your Portege M400 and you can remove it. It of really not easy and so this cannot be the people with a lot of experience.

  Anyway, as you know here our forum user s only. This means that you can speak with normal people like you and me. I would recommend therefore to contact a service provider authorized in your country. Maybe the guys know this problem or something else or you need a thermal grease special because not all compatible thermal greases all cooling.

  By the way: on the Toshiba site you can find a list of all service providers.

  I hope it helps. :)

• Portege M400. Update BIOS 1.8 V

  Did someone tried this new update?
  I was put off by the wording of the disclaimer.
  It seems that in order to reduce the continuous fan use the price to pay will be a hot computer.
  Which will affect the life expectancy of computer?
  Also, as is an update of "stand alone", is it possible to undo changes and revert to a previous version if necessary?
  Finally, the increase of heat on the base of the unit going to do uncomfortable to work with in the form of tablets?
  Thanks for the feedback.

  Hello

  I found the news that Toshiba has designed a new BIOS update special V1.80W with improved noise in "idle" mode and low CPU load mode. This should help and the Portege M400 will run very quietly. It is possible that the low FAN speed will result in higher temperatures on the palpable user as palm rest or base of coverage. It will probably be a few degrees Celsius, but nothing serious.

• Portege M400: Windows XP does not recognize the 160 GB HARD drive

  Hello

  I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?

  Best regards

  Karl Weber

  Hello

  You have to install and include the Portege M400 RAID drivers.
  It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.

  Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.

  After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.

  Best regards

• Satellite L650 - 11Z - Windows update problem 800706BE/800706BA

  Hey,.

  I have problems with the automatic update on windows 7 64 bit. I bought this laptop (Toshiba Satellite L650 - 11Z) last July.

  When the computer begins to do the automatic update, there a while and reports the problems mentioned in the subject.

  I tried to find help for Windows support, but there is a statement, that if windows is installed in the laptop before buying it, I should consult the producer of the computer.

  Matias

  Hello

  I found this info on the 800706BE error:
  + Error 800706BA is a standard Windows error with many causes. It more often refers to Microsoft COM Internet Services (CIS) on the call of client DCOM Distributed Component Object Model (RPC_S_SERVER_UNAVAILABLE); the RPC server is unavailable (Windows Event ID) 1722. That's when a RPC request expires and 800706BA error results. +

  I found this here:
  http://www.Symantec.com/business/support/index?page=content&ID=TECH54543

  Here are also a few details and proposals for solution of Microsoft:
  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-8024000B
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Hope this helps

• HP Compaq laptop: windows update problems

  Hello

  Could someone help please, for the last few weeks where are updates of Windows security and I think that all is well I keep getting messages flashing up to say that updates could not be completed. This seems to be only on some of them, I'm not very tech savvy and have no idea how to do to fix this, it would be good if someone could tell me in simple terms how to overcome this problem.

  Thanks in advance

  John G

  Hi @Johnymac,

  Thank you for your response.

  What is your specific model of HP Compaq laptop?

  There is a link in my previous post to help you find this information.

  If you have a firewall (firewall of Windows example) make sure that Windows update is on the white list. You can also try disabling the firewall and retry the Windows Update to see if that helps.  If it do not forget to reactivate it later.

  Have you checked against viruses and malware?

  Microsoft offers also get help Windows 10.

  Microsoft Corporation / Customer Support

  1-800-642-7676

  Microsoft Support contact us

  Please keep me updated.

• y480 windows update problems

  so I just got this laptop and it the windows update keeps failing and its quite frustrating.

  so, every time I stopped it will download the updates and when I restart it it will try to configure everything, but it fails and go back to the old config and it will just continue to do what it is pretty frustrating, anyone have any ideas?

  Hello and welcome,

  Try this: Re: x 230 problem with config/system updates of windows

  Z.

• Windows Update problems - you must run Microsoft Internet Explorer 5 or later

  Whenever I try to go to windows update I get this

  Thank you for your interest to get updates of our site.

  To use this site, you must run Microsoft Internet Explorer 5 or later.

  To upgrade to the latest version of the browser, go to the website downloads of Internet Explorer.

  If you prefer to use another web browser, you can get updates from the Microsoft Download Center , or you can stay up to date with the latest reviews and updates using automatic updates. To turn on automatic updates:

  1. Click Startand then click Control Panel.
  2. Depending on which control panel view you use, classic or category, do one of the following:
     • Click System, and then click the automatic updates tab.
     • Click performance and Maintenance, click System, and then click the automatic updates tab.
  3. Click the option you want. Make sure that automatic updates is not turned off.

  am under explore 8 and it is updated. Is there any help out there for this? I'll be bald if I can't solve this problem quickly.

  I will try to reinstall the Windows Update Agent Installer.  Here is a link to the Microsoft site that explains how to do this: http://support.microsoft.com/kb/949104.

  Go to the section How to get the last agent to update as it is already installed.  Scroll down to the section on the additional information tab called Windows Vista, Windows Server 2008, Windows XP, Windows Server 2003 and Windows 2000 Service Pack 4 (I checked that it also works under Windows 7).   Choose one that fits your computer (x 86, x 64, Itanium).  Run this update and follow the instructions.  Windows Update will now be reinstalled, but it's a good idea to restart at this point.

  I hope this will solve your problem.

  Barbara