Portege M750 on plu III Advanced Port Replicator

Similar Questions

• Tecra M9 longer works with the Advanced Port Replicator III

  Hello

  I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

  Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

  Question: * the M9 will work with my plu III advanced port replicator? *

  Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

  If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

  All thoughts welcome...

  See you soon
  Daniel
  --

  Tecra M9 and Tecra M5 do not have the same docking connector.
  This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
  You need the correct docker for each system.

  May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
  http://www.dynadock.com

• Tecra M3: Failed to connect to the double monitors w / Advanced Port Replicator III

  I use a Tecra M3 I put it in place for an III Advanced Port Replicator and I can't dual display to work properly. I have a monitor connected to the DVI port and then another connected to the VGA port. It seems that the laptop is the 1 view and can get only one monitor to work. How can I get the two external monitors to work?

  Thank you
  MBorchardt

  Hello

  In my opinion, you can use a single external screen because you can choose between analog display, the TV and digital flat screen. As far as I know, you can use the FN + F5 keys to change between display devices and can only be set to an external TV or CRT and LCD monitor internal. But not to external displays.
  In addition, I propose to refer to External monitor in the manual which is preinstalled on this device.

  Good bye

• Portege M200: big screen via the port replicator

  I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

  What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

  I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

  One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

  Can anyone help?

  Hello

  Well the Tecra9100 is not a Portege M200. Are completely different books.
  The M200 protected does not support these interfaces.
  This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
  will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

  The following ports are supported and can be used:
  Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
  In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

• Advanced port replicator II PA3082E DVI out

  Hello

  Portege M100, XP Pro, II advanced port replicator.
  I can get VGA out but not DVI signal.
  How can I switch to DVI output instead of analog VGA connector?
  I've looked everywhere, this option and even sought a separate driver, but always now light DVI.

  TIA,
  John

  Hi John

  I also have information that some units don't supports this interface. To be sure if this info is just make a call to the Toshiba service partner in your country. They have this kind of information.

  Good bye

• Need Advanced Port Replicator III drivers for use with my Portege M300

  Hello

  I have a Portege M300 with an Advanced Port Replicator III. I had to reinstall the operating system and now can not find the drivers for the port replicator.

  Can someone help me? I am running Win XP

  Thank you

  Hello

  I guess that you need drivers for the XP operating system. Am I wrong?
  You will find on the page of the Toshiba driver all drivers needed and utilities for Portege M300.
  You will also find the installation instructions document. This document shows the proper installation order.

  You simply download all the drivers and follow the order of installation. All that s

• Advanced Port Replicator III more compatible with the Portege R200

  I just ordered a new Portege R200 and above-port replicator... However, I note that the R200 is not listed in the list of laptops supported for this Replicator! Can anyone confirm if I have made a mistake and need to change the order?

  Will be

  I visited the area Options & accessories on the European site of Toshiba, and like you said the Portégé R200 is not listed in the list of mobile phones compatible.
  So I assume that the Advanced Port Replicator III more (PA3474E-1PRP) does not support the protected R series.

• Tecra M3 and Advanced Port Replicator III: not recognized as docking station

  Hello!

  Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

  Is TI WHEREAS behavior?
  Thank you in advance.

  Hello

  You reinstall the unit with the recovery CD?
  As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
  Well, I recommend to reinstall this driver and utility.
  Perhaps the installation of the new driver will solve this problem.

  Good bye

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• III - issue of serial port Advanced Port Replicator.

  Hi, I have a few apps that do not work with usb to serial adapters. I need to know if the serial port on an advanced port replicator will not work unless the serial port was "integrated" to the computer, as they used to be in older laptops.

  Are the drivers required to make ports to work within windows?

  I have a Tecra M2.

  According to the specification for Tecra M2 Toshiba PA3314E - 1PRP Port Replicator III Advanced is certainly compatible and I guess it should work. Unfortunately, my printer has USB port and I can't test it.

• III Plus driver/Frimware Advanced Port Replicator

  Hello

  I'm having some trouble with my M300 Poretege on Advanced Port Replicator III Plus. Some Fn keys do not work, and I'm not able to get proper display on my external monitor.

  Question: are there drivers for the Port Replicator? I don't have a CD or other installation media.

  Thank you, Richard

  Hello Richard

  Give us details please! These FN keys work without portreplicator? Don t FN keys work correctly?

  Check if the graphics card supports display resolution you have to put on the external screen.

• Where can I download a manual for Advanced Port Replicator III more

  Where can I download a manual for this?
  I have searched the manuals download section but could not find a reference to it.
  Thanks for any help

  Seems that this manual is not available in the Toshiba user manual page.
  But generally, you should receive a manual as well as the Advanced Port Replicator III more.

• Advanced Port Replicator III and Tecra M5 - compatibility issue

  Hi all

  Had a brief search, but could not find a similar position.

  Is the Advanced Port Replicator III PA3314E-1PRP compatible with a laptop Tecra M5?

  Thanks in advance and amicably.

  James

  Yes, it is compatible, I can confirm this info above
  If you wish, you can consult the Web of Toshiba Europe site Options & accessories.
  You will find this info useful

• Protect S100: Advanced Port Replicator/Docking Station

  I need to know what docking station to use it please.
  Advanced Port Replicator III Docking Station
  This one will work?

  Hello Andrew

  I found some nice info on the unit that is compatible with your S100 Portege.
  Visit this link:

  http://www.CostCentral.com/prodDetail/Toshiba_Advanced_Port_Replicator_III/PA3314U1PRP/C90140/

  Hope so, I could help

  Good bye

• Portege 3480CT - DVD player in those Port Replicator errors

  I have a Toshiba Portege 3480CT with an external media Port Replicator.
  The MPR has a DVD player, but I can't get the laptop to recognize DVD.
  He can see and read CDs, but I get the following error when I try to watch a DVD.
  "ASPI for Windows is not available...
  Only 32 bits supported CD rom drive... »
  The MPR recognizes that the drive is there.
  Laptop is running Windows XP SP2
  Have the BIOS update update and installed all the drivers Toshiba known.
  Can anyone help? Thank you.

  Hello

  In my opinion you need driver ASPI Google everywhere. Maybe you will find the solution for your problem. You can start with this one http://www.ncf.carleton.ca/~aa571/aspi.htm